Support Portal
Arizer Go Support
All the topics and information you need for the Arizer Go.
- 1 x Arizer Go Portable Micro-Heater
- 1 x Go Battery
- 1 x Go USB Charger / Power Adapter
- 2 x Go Glass Aroma Tube
- 2 x Go PVC Travel Tube w./ Cap
- 1 x Go Belt-Clip Carry Case
- 2 x Go Silicone Stem Caps
- 1 x Stainless Steel Stirring Tool
- 4 x Go Stainless Steel Filter Screens
- 1 x Arizer Go Owners Manual
Arizer Batteries meet rigorous quality standards. With normal use they will last for hundreds of charge cycles before losing any capacity. Dropping the battery or the unit can result in battery damage that may limit / reduce the battery capacity quickly, so it is important to handle the batteries and your unit carefully.
Battery Charge
Depending on the temperature setting and general usage patterns the Arizer Go battery will typically last for 1.5 hours of use per charge. The battery will take 3.5 hours to fully charge, or longer if you use it while charging.
Use While Charging
If your battery is running low, with the Arizer Go you don’t have to wait for the battery to fully charge before you can use it. Just partially charge the battery (15-20 minutes) and then you can set the temperature and use the Arizer Go while the battery continues charging. Note: The Arizer Go will not operate if the battery is completely drained.
Interchangeable / Swappable Battery
An easily interchangeable battery allows you to have some spare batteries fully charged as a back-up for when your battery is running low and for extended use on the go.
Battery Conservation
The Arizer Go and Arizer Go Chargers have built-in protections to prevent the battery from being overcharged or drained too low. To conserve battery life, use the Arizer Go in a temperature controlled environment and use the lower temperature settings. When outdoors, stay sheltered from the elements and avoid using in extremely cold temperatures. Charge the battery as necessary. Do not store the battery fully charged or fully drained for longer than one month (store with partial charge).
Safety Disclaimer
Arizer Batteries should not be substituted for third-party batteries — Only use official Arizer Go Batteries with your Arizer Go. We cannot verify the quality or safety of other batteries, and using third-party batteries can result in personal injury, electric shock, and damage to the device which is not covered under warranty.
The Control Panel consists of the OLED and three buttons: the Menu button and the plus (+) & minus (-) buttons. Use the Menu button to navigate through the different settings and the plus & minus buttons to adjust them.
Temperature Settings
The Arizer Go’s optimized heating system warms up fast and has a wide temperature range of 50°C-220° C (122°F- 428° F). The temperature is adjustable in 1-degree increments and 10-degree increments.
Audio / Beep
The Audio / Beep function has three volume settings and can be turned on and off. If the Audio / Beep is activated, a beep will be heard when the Arizer Go is powered on or off. If the Audio / Beep is deactivated, the Arizer Go remains silent when powered on or off.
Temperature Alert
This function has three volume settings and can also be turned off. If the Temperature Alert is activated two beeps will be heard when the set temperature is reached.
Power-On Delay
The power-on delay safety feature ensures you don’t accidentally turn on the unit and has four settings for your convenience: 2 seconds, 4 Seconds, 6 Seconds, and 8 Seconds. The default setting is 6 seconds.
Automatic Shut-Off Timer
The automatic shut-off timer safety feature ensures you don’t forget to turn off the unit and helps conserve battery life. The shut-off timer can be adjusted between 5–15 minutes in one-minute increments. The default setting is 10-minutes.
Celsius or Fahrenheit
The Arizer Go display can be set to Celsius or Fahrenheit. The default setting is Celsius.
Display Brightness
The Arizer Go’s display has three brightness settings: low, medium, and high. The default setting is medium.
A full range of parts and accessories to equip and protect your Air II are available for purchase here.
If you can’t find the part you need send us an email to: [email protected] with a description of the part you need.
The Arizer Go is ultra-compact, lightweight, and completely portable, conveniently fitting in the palm of your hand, pocket, or purse.
- Weight: 97 grams
- Length: 52 mm
- Width: 24 mm
- Height: 83 mm/ 93 mm
Equipped for worldwide use with an input capacityof 110-240V and international safety certifications.
The Arizer Go carries a lifetime warranty on the heating element, and a limited 2-Year warranty covering defects in materials or workmanship, excluding battery. Glass is not covered under warranty. Retain proof of purchase for warranty service. Returning the product and costs incurred are the responsibility of the user. Arizer will repair or replace warrantied items at our discretion. The warranty does not cover units damaged by dropping, tampering, unauthorized service performed or attempted, modifying the unit,misuse or abuse.
Cautions, Disclaimers and Warnings (Read Before Use)
First Time Use – Examine box contents to ensure all included parts are in good condition, not damaged from shipping. Check glass parts for cracks or breakage. Packaging materials, bags, & small parts may pose a choking hazard. Keep out of reach/use from children, minors, and pets. Glass Aroma Tubes may fit tightly in the unit at first. If you are finding it difficult to insert a Glass Aroma Tube, turn on the Arizer Go, set the temperature to 200° C, and let the unit heat for 1-2 minutes then try again. To burn off any residues from packaging, turn on the unit, set the temperature to 220° C, and let the unit heat for 5 – 10 minutes.
Warning – Hot Parts – Handle hot parts and glass parts with care. Do not place hot parts on non-heat safe surfaces. Carefully attach protective heat-rated silicone caps to safely cover hot end of glass parts. Allow heating unit and hot parts to cool before placing in purse, pocket, or any container where damage from hot parts can occur.
Parts are made from strong scientific quality borosilicate glass, but all borosilicate glass is breakable so handle with care and caution. Avoid tapping on hard surfaces to prevent cracking and breaking. If glass is dropped or sustains an impact, examine for cracking, chipping and weakness before use. Do not expose hot glass parts to cold water or extreme temperature change as this may result in cracking/breaking.
Product contains electrical and delicate parts — do not drop. If damaged do not operate. To protect/prevent against electric shock/fire never immerse or operate the product in or around any water/liquids. Do not stick or pour anything in the unit or place near flammable material. Do not store/operate/expose the unit and contents to extreme temperatures. Do not open the unit – doing so may cause electric shock and voids warranty.
Do not leave the unit turned on and left unattended.
The information contained in this manual is an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficacy or use of its preparation. This information is not intended in any way to replace or supersede professional consultations.
The information contained herein is for instructional and cautionary purposes only. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition, or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device, use unit only for its intended use.
Safety Certifications
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
Limitation of Liability (Read before use)
Failure to read or follow instructions, improper or careless use may lead to personal injury. Arizer and affiliated companies will not assume any liability for injury or damage resulting from the use or misuse of this device. Due to the fragility and nature of glass Arizer and affiliated companies are not responsible for cuts or injuries sustained from breakage. Arizer and affiliated companies are not liable for injuries or burns associated from touching hot parts. Arizer and affiliated companies are not liable for failures to comply with these warnings and safety guidelines. By purchasing this product, the buyer assumes all risks associated with lithium batteries. If you do not agree with these conditions return the product immediately before use.
This product is intended for use with the botanicals described herein — Arizer and affiliated companies are not liable for use with other than those botanicals described herein. Company’s liabilities for damages in connection with the product and its parts shall not exceed the purchase price of the product.
IMPORTANT – Obey local laws. Not all essential oils, botanicals and herbs are legal for use in every Country or State. Check your Local, State, Federal and Importation laws before ordering botanicals. This device is meant for legal use only.
Battery Safety & Warnings (Read before use)
Lithium batteries are volatile. Failure to read and follow these instructions may result in fire, personal injury and damage to property if charged or used improperly.
– Always handle your batteries with care – never drop them.
– Fully charge your Arizer Go Batteries before first use.
– Only use official Arizer Go Batteries & Chargers. Do not use any third-party, counterfeit, or unknown brand batteries or chargers.
– Lithium batteries can explode or cause a fire if they are used incorrectly or if they are defective. Do not tamper with or misuse the Arizer Go Batteries and do not use damaged/defective batteries.
– Arizer Go Batteries are manufactured to strict quality standards, specifically for use with the Arizer Go.
– Always match positive (+) and negative (-) when inserting batteries into the Arizer Go and the Arizer Go Battery Chargers.
– Batteries that are not in use should be stored in a safe, cool, dry place, individually in a plastic holder or container / away from all metal objects.
– Do not store your batteries fully charged or fully drained for extended periods of time (one month or longer).
Never throw the Arizer Go Batteries away and never put them into a battery collection box. If you have dropped the battery or notice physical damage you should take the following steps:
- Store the battery in a safe, dry place and leave it for at least one hour in case there is a short circuit and the battery starts heating up.
- Check to see if the battery has become hot. If so, leave the battery until it has cooled off.
- For further protection, wrap the battery in a piece of kitchen paper and seal it with tape.
- Put the battery into a box and label it: “Lithium – Ion battery” and hand it in to a chemical waste disposal facility.
Counterfeit & Inferior – Quality Battery Warning:
-Customers are urged to be careful when purchasing batteries due to the flood of counterfeit and inferior-quality batteries for sale often found on online-auction and various websites.
-The use of counterfeit and/or inferior-quality lithium batteries can cause internal shorts leading to fires and/or explosions which can result in property damage and/or personal injury.
– The use of counterfeit and/or inferior-quality batteries could greatly reduce runtime and output performance, damage your Arizer Go, constitute a safety hazard, and voids all warranties.
If you experience an issue with your Arizer Go send an email to [email protected] and an expert Arizer customer service representative will reply as soon as possible to troubleshoot and determine the best way to resolve any issues. To help expedite your service request please include a description of the problem, your full name, your shipping address, the serial number on the bottom of your device, and a copy of your sales receipt.
ArGo
Air MAX
Air II
Air
Solo II
Solo
XQ2
Extreme Q
V-Tower
PoliciesShopping Help
Hover over the User icon at the top of the page and click on “Register”. Fill in the required information, agree to the Terms of Use and click the “Register” button. You will receive 2 confirmation emails.
Hover over the User icon at the top of the page and click on “my Account”. fill in the required information and click the “Login” button.
Hover over the User icon at the top of the page and click on “My Account “. Select the Lost Your Password Option under the Login button. Enter your email and Click “Reset Password” button. An email will be sent to your inbox with further instructions.
Hover over the User icon at the top of the page and click on “My Account”. From the My aAccount Page you can access your Order history, Address, Payment Method and Account Details.
Click the desired product in the header menu. This will bring you to the product page. Some models have multiple options: Here you can select your preferred option. After your product is selected you will be given the option of the model and it’s accessories. Click the “Accessories” icon to navigate the model’s accessories.
After the preferred options are selected click the “Add to Cart” Button. At any point you have the option to access your Shopping Cart in the top left corner. Clicking the shopping cart will bring you to your cart where you can edit and review your order. IF you need to add another item to your order simply use the top navigation menu to continue shopping and return to the cart at any time by accessing the floating ‘Cart’button on the top left corner of the page. If you are ready to complete the order click the “Proceed to Checkout” button on the cart icon or at the bottom of the cart page.
When you first land on the checkout page if you are not logged in you will be prompted to log in. There is also an option to apply a coupon code to your purchase. You will not be taken away from the page when you click those buttons. They just expand. If you are logged in your billing details will be all filled in automatically. If you are not logged in you will need to enter accurate billing details. If you wish to ship to an alternative address click on the checkbox to expand the “Ship to a different address” option. The checkout page also has an order summary which displays all charges for your order(including applicable taxes”) and will display your shipping options.
Payment Options
We have various payment options depending on where in the world you are located. We accept Credit Card, Interac Online and Paypal.
If your payment is declined, check to make sure your Billing Address matches the address that your credit card provider has on file.
If you confirm that you entered all your information correctly, please contact your credit card provider to confirm available funds and / or to confirm there are no holds on your account restricting purchases from Canada.
We process orders promptly and in most cases we are unable to make any changes to an order after it has been paid for. Please be sure about what you want to order before you pay. If you have any questions about an order that you have placed, please send us an email to: [email protected], and provide your order number along with the details of your request.
Contact Arizer Support
Service
Toll Free
Leave us a voice message and we'll get back to you ASAP
888-291-0521
Wholesale
Interested in becoming a Retailer or Distributor?
Click Here
Arizer XQ2 Support
- 1 x XQ2 Multi Purpose Heater
- 1 x XQ2 Power Adapter and Cord
- 1 x XQ2 Remote Control
- 2 x XQ2 Glass Connoisseur Bowls
- 2 x XQ2 Tuff BowlGrips
- 1 x XQ2 Glass Aromatherapy Dish
- 1 x XQ2 3’ Whip (Silicone)
- 1 x XQ2 Glass Mini Whip w./ Dome Screen
- 1 x XQ2 Frosted Glass Balloon Mouthpiece
- 1 x XQ2 Balloon Connector
- 2 x XQ2 Balloon Bags
- 1 x XQ2 Balloon Cap
- 1 x XQ2 Air Filter Cartridge w./ Filter
- 1 x XQ2 Stainless Steel Stirring Tool
- 1 x XQ2 Flat Screen
- 1 x XQ2 Dome Screen
- 1 x XQ2 Owner’s Manual
The Control Panel consists of the LCD and five buttons – the Power button, the Settings button, the Fan
button and the Up & Down Arrow buttons. Press the Settings Button to access the menu and press the Up or Down buttons to navigate. When the desired Custom Session Setting is displayed, press the Settings button to
select it, then press the Up or Down buttons to scroll through the options. When the desired option is
displayed, press the Settings button to return to the menu, or wait 5 seconds to return to the temperature
display.
The XQ2 display can be set to Celsius or Fahrenheit, and has a wide temperature range of 50° C – 260° C (122°F – 500° F). The temperature is adjustable in 1-degree Celsius increments with the Control Panel buttons on
the unit and with the Remote Control.
To adjust the temperature, on the control panel press the Up or Down Arrow buttons, or on the Remote Control press one of the preset buttons, the default temperatures are: (1) 170C/338F, (2) 185C/365F, and (3)
200C/392F, or use the Arrow buttons.
Press the Fan button to switch between Low, Medium, High and Off. The Remote Control also has four
dedicated buttons to change fan speeds directly.
If it is taking longer than 2-3 minutes to fill the bag / balloon it might be time for you to clean or replace some
parts such as the Dome Screen and the Balloon. If you check these things and a problem persists, please refer
to the Troubleshooting section below.
LED lights in the unit base and heater can be set to Off, Dynamic Mode, Spectrum Mode, or one of 8
individual color options. Spectrum Mode changes the color every 2 seconds in a continuous loop. Dynamic
mode allows you to tell the state of the unit at a glance:
• Heating: Pulses from Yellow to Orange during heat up
• Reach Set Temperature: Blinks Green twice when set temperature is reached
• Stable Temperature: Pulses orange continuously while set temperature is maintained
• Fan Operation: Pulses purple when fan is active
• Cooling: Pulses cyan while the temperature is cooling down
• Cooling with Fan: Pulses blue while cooling with the fan activated.
A full range of parts and accessories to equip your XQ2 are available for purchase here.
If you can’t find the part you need send us an email to: [email protected] with a description of the part you
need.
Note: The device comes with a link to a step-by-step repair instruction video, and is available on the XQ2
Accessories page.
Small, sturdy, and lightweight. Sized to fit conveniently on any counter, desk, or table.
Weight (no parts): 500g (1lb 1.6oz)
Height (no parts): 162mm (6.78″)
Base Diameter: 160mm (6.23″)
Equipped for worldwide use with an input capacity of 110-240V with international safety certifications.
If you experience an issue with your Arizer XQ2 send an email to [email protected] and an expert Arizer
customer service representative will reply as soon as possible to help troubleshoot and resolve any issues. To
expedite your service request please include a description of the problem, your full name, your shipping
address, the serial number on the bottom of your device, and a copy of your sales receipt.
The Extreme Q carries a lifetime warranty on the heating element and a limited 3-Year warranty covering defects in materials or workmanship. Glass is not covered under warranty. Retain proof of purchase for warranty service. Returning the product and costs incurred are the responsibility of the user. Arizer will repair or replace warrantied items at our discretion. The warranty does not cover units damaged by dropping, tampering, unauthorized service performed or attempted, modifying the unit, misuse or abuse.
Cautions, Disclaimers and Warnings (Read Before Use)
Examine box contents to ensure all included parts are in good condition and not damaged from shipping. If new items are received damaged, do not use, and email [email protected] for assistance. Packaging materials, bags and small parts may pose a choking hazard. Keep out of reach from children, minors, and pets. Prior to first use, let the unit heat for 5-10 minutes at 220°C to burn off any residue from packaging and manufacturing. Not for use with e-liquids, tobacco, or tobacco products. Misuse can result in damage and voids all warranties. Unauthorized service performed voids all warranties. For assistance email [email protected]
Hot device and hot parts are a burn hazard – handle with care and caution
- Never leave the unit turned on and unattended.
- Keep the unit upright at all times.
- Allow the unit and hot parts to cool before handling, storing, or placing on a surface where heat damage can occur.
Borosilicate glass is breakable – handle with care and caution
- Avoid hitting or tapping glass parts on hard surfaces to prevent cracking.
- Do not expose hot glass to cold water or extreme temperature changes.
- Examine parts periodically for cracks, chipping and weakness from handling and drops.
- Do Not use cracked or broken glass.
- Safely dispose of damaged glass according to local regulations.
Product contains electrical components – handle with care and caution.
- Do not immerse or operate the product in or around any liquids.
- Do not insert or pour anything into the unit.
- Do not operate if damaged or exposed to any liquids.
- Do not store or operate the unit or contents near flammable material or in extreme temperatures
- Do not open the unit; doing so may result in electric shock.
- Unplug the unit by gripping the plug body and pulling it from the outlet. Do not yank or twist the cord to unplug it.
- Do not let the cord touch hot surfaces.
- Position the unit so the cord cannot be pulled or tripped over.
- If an extension cord is required, use a grounded, three-prong power cord.
The information contained in this manual is provided for instructional and cautionary purposes only, as an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficacy or use of its preparation. This information is not intended in any way to replace or supersede professional consultations. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition, or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device; use only as intended.
Limitation of Liability (Read Before Use)
Failure to read or follow instructions, improper or careless use may lead to personal injury. Arizer and affiliated companies will not assume any liability for injury or damage resulting from the use or misuse of this device. Due to the fragility and nature of glass Arizer and affiliated companies are not responsible for cuts or injuries sustained from breakage. Arizer and affiliated companies are not liable for injuries or burns associated with touching hot parts. Arizer and affiliated companies are not liable for failures to comply with these warnings and safety guidelines. If you do not agree with these conditions, return the product immediately before use.
This product is intended for use with the botanicals described herein — Arizer and affiliated companies are not liable for use with other than those botanicals described herein. Company’s liabilities for damages in connection with the product and its parts shall not exceed the purchase price of the product.
IMPORTANT – Obey local laws. Not all botanicals and herbs are legal for use in every Country or State. Check your Local, State, Federal and Importation laws before purchasing botanicals. This device is meant for legal use only.
Safety Certifications
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
The Balloon consists of the Bag, Balloon Connector, Balloon Cap and Frosted Glass Balloon Mouthpiece.
1. Slip the silicone balloon cap over the glass mouthpiece so it rests between the glass bulbs.
2. Insert the bottom (unfrosted end) of the glass mouthpiece through the top of the hole of the silicone balloon connector. Push until the bulbs of the mouthpiece is fully on each side of the cap.
3. Gather the open end of the balloon and insert it through the large opening in the threaded base until there is enough material to fold evenly back past the base threads.
Note: The size of the bag can be adjusted by changing how much material is pulled through the opening. Ensure excess material is trimmed.
4. Push the two pieces of the balloon connector together until they lock. Slide the connector up the glass until it rests against the bulb closest to the frosted mouthpiece.
North America – 628078801451
Europe – 628078801468
UK – 628078801475
Australia – 628078801482
Israel – 628078801499
Air MAX Support
All the topics and information you need for the Air MAX.
- 1 x Air MAX Portable Micro-Heater
- 1 x Air MAX Battery
- 1 x Air MAX USB-C Charger / Power Adapter
- 1 x Air MAX Glass Aroma Tube (70mm)
- 1 x Air MAX Frosted Glass Aroma Tube (14mm)
- 1 x Air MAX Glass Aroma Dish
- 2 x Air MAX Silicone Stem Caps
- 2 x Air MAX PVC Travel Tube w./ Cap (70mm Size)
- 1 x Air MAX PVC Travel Tube w./ Cap (Aroma Dish Size)
- 1 x Air MAX Stainless Steel Stirring Tool
- 4 x Air MAX Stainless Steel Filter Screens
- 1 x Air MAX Owner’s Manual
Arizer Batteries meet rigorous quality standards. With normal use they will last for hundreds of charge cycles before losing any capacity. Dropping the battery or the unit can result in battery damage that may limit or reduce the battery capacity quickly, so it is important to handle the batteries and your unit carefully.
Battery Charge
Depending on the temperature setting and general usage patterns the Air MAX battery will typically last for 2 hours and 15 minutes of use per charge. The battery will take approximately 3 hours to fully charge, or longer if you use it while charging.
Use While Charging
If your battery is running low, with the Air MAX you don’t have to wait for the battery to fully charge before you can use it. Just partially charge the battery (15-20 minutes) and then you can set the temperature and use the Air MAX while the battery continues charging. Note: The Air MAX will not operate if the battery is completely drained.
Battery Conservation
The Air MAX and Air MAX Chargers have built-in protections to prevent the battery from being overcharged or drained too low. To conserve battery life, use the Air MAX in a temperature-controlled environment and use lower temperature settings. When outdoors, stay sheltered from the elements and avoid using in extremely cold temperatures. Charge the battery as necessary. Do not store the battery fully charged or fully drained for longer than one month (store with partial charge).
Battery Replacement
The Air MAX Battery is a high-capacity, long life battery, and will last for a long time, even with prolonged / regular use. Spare/replacement Air MAX batteries are available for purchase at www.arizer.com
Safety Disclaimer
Arizer Batteries should not be substituted for third-party batteries — Only use official Air MAX Batteries with your Air MAX. We cannot verify the quality or safety of other batteries, and using third-party batteries can result in personal injury, electric shock, and damage to the device which is not covered under warranty.
The Control Panel consists of the OLED Display Screen and three buttons: the single Menu (M) button on the left side and the plus (+) and minus (-) buttons on the right side.
The Air MAX has two display modes:
Normal Mode – Use Normal Mode for full display and complete Custom Session Settings.
Dark Mode – Use Dark Mode for discrete, low-light display and customizable dark settings.
Normal Mode Settings
Use the Menu button to navigate through the different settings, then use the plus (+) and minus (-) buttons to adjust them.
Temperature Alert
The Air MAX’s optimized heating system warms up in under a minute and has a wide temperature range of 50° C – 220° C (122° F – 428° F). The temperature is adjustable in 1-degree increments and 10-degree increments.
Audio / Beep
This function has three volume settings and can also be turned off. If the Audio / Beep is activated, a beep will be heard when the Air MAX is powered on or off.
Temperature Alert
This function has three volume settings and can also be turned off. If the Temperature Alert is activated, two beeps will be heard when the set temperature is reached.
Automatic Shut-Off Timer
The automatic shut-off timer safety feature ensures you don’t forget to turn off the unit and helps conserve battery life. The shut-off timer can be adjusted between 5 – 15 minutes in one-minute increments. The default setting is 10-minutes.
Celsius or Fahrenheit
The Air MAX display can be set to Celsius or Fahrenheit. The default setting is Celsius.
Display Brightness
The unit’s display has three brightness settings: low, medium, and high. The default setting is high.
Power-On Delay
The power-on delay safety feature ensures you don’t accidentally turn on the unit and has four settings for your convenience: 2 Seconds, 4 Seconds, 6 Seconds, and 8 Seconds. The default setting is 6 seconds.
Automatic Display Inversion
Turn the unit upside down and the display automatically inverts.
Dark Mode Settings
Use the Menu (M) button to navigate through the different settings, then use the plus (+) and minus (-) buttons to adjust them.
Temperature Settings – Adjust in 1-degree increments and 10-degree increments. Default setting is 200° C.
Audio / Beep – This function has two options (Low and Off). Default setting is Off.
Temperature Alert – This function has two options (Low and Off). Default setting is Off.
Automatic Shut-Off Timer – This function can be adjusted between 5 – 15 minutes in one-minute increments. The default setting is 10-minutes.
Celsius or Fahrenheit – This feature cannot be changed in Dark Mode.
Display Brightness – In Dark Mode, screen brightness is always low. This setting is not displayed in the menu and cannot be adjusted.
Power-On Delay – This safety feature has four settings: 2, Seconds, 4 Seconds, 6 Seconds, and 8 Seconds. The default setting is 4 seconds.
Automatic Display Inversion – Turn the unit upside down and the display automatically inverts.
Important:
Dark Mode settings are independent and stored separately from Normal Mode settings.
Dark Mode
In Dark Mode, small icons represent the functions:
(circle) Top Right Corner: Power On Delay.
(square) Top Left Corner: Idle.
(plus) Bottom Left Corner: Heating.
(triangle) Bottom Right Corner: Ready for Use.
A full range of parts and accessories to equip and protect your Air II are available for purchase here.
If you can’t find the part you need send us an email to: [email protected] with a description of the part you need.
The Air MAX is ulta-compact, lightweight, and completely portable, conveniently fitting in the palm of your hand, pocket, or purse.
- Weight: 160 grams
- Height: 128 mm
- Diameter: 30 mm
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
The Air MAX carries a lifetime warranty on the heating element, and a limited 2-Year warranty covering defects in materials or workmanship, excluding battery. Glass is not covered under warranty. Retain proof of purchase for warranty service. Warranty is non-transferrable, valid from the original date of purchase and does not extend or renew with service. Returning the product and costs incurred are the responsibility of the user. Arizer will repair or replace warrantied items at our discretion. The warranty does not cover units damaged by dropping, tampering, unauthorized service performed or attempted, modifying the unit, misuse or abuse.
First Time Use – Examine box contents to ensure all included parts are in good condition, not damaged from shipping. Check glass parts for cracks or breakage. Packaging materials, bags, and small parts may pose a choking hazard. Keep out of reach and use from children, minors and pets. Glass Aroma Tubes may fit tightly in the unit at first. If you are finding it difficult to insert a Glass Aroma Tube, turn on the Air MAX, set the temperature to 200° C, and let the unit heat for 1-2 minutes then try again. To burn off any residues from manufacturing and packaging, turn on the unit, set the temperature to 220° C, and let the unit heat for 5 – 10 minutes. If new items are received damaged, do not use, and email [email protected] for assistance.
Warning – Hot Parts – Handle hot parts and glass parts with care. Do not place hot parts on non-heat safe surfaces. Carefully attach protective heat-rated silicone caps to safely cover the hot end of glass parts. Allow the heating unit and hot parts to cool before placing them in a purse, pocket, or any container where damage from hot parts can occur. Not for use with e-liquids, tobacco, or tobacco products. Misuse can result in damage and voids all warranties. Unauthorized service performed voids all warranties. For assistance email [email protected].
Parts are made from strong scientific quality borosilicate glass, but all borosilicate glass is breakable so handle with care and caution. Avoid tapping on hard surfaces to prevent cracking and breaking. If glass is dropped or sustains an impact, examine for cracking, chipping and weakness before use. Do not expose hot glass parts to cold water or extreme temperature change as this may result in cracking and breaking. Safely dispose of damaged glass according to local regulations. Examine parts periodically for cracks, chipping and weakness from handling and drops.
Product contains electrical and delicate parts — do not drop. If dropped or otherwise damaged do not operate. To protect and prevent electric shock and/or fire never immerse or operate the product in or around any water and/or liquids. Do not stick or pour anything in the unit or place near flammable material. Do not store, operate or expose the unit and contents to extreme temperatures. Do not open the unit – doing so may cause electric shock and voids warranty.
Do not leave the unit turned on and left unattended.
The information contained in this manual is an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficacy or use of its preparation. This information is not intended in any way to replace or supersede professional consultations.
The information contained herein is for instructional and cautionary purposes only. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device, use unit only for its intended use.
Safety Certifications
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
First Time Use – Examine box contents to ensure all included parts are in good condition, not damaged from shipping. Check glass parts for cracks or breakage. Packaging materials, bags, and small parts may pose a choking hazard. Keep out of reach and use from children, minors and pets. Glass Aroma Tubes may fit tightly in the unit at first. If you are finding it difficult to insert a Glass Aroma Tube, turn on the Air MAX, set the temperature to 200° C, and let the unit heat for 1-2 minutes then try again. To burn off any residues from manufacturing and packaging, turn on the unit, set the temperature to 220° C, and let the unit heat for 5 – 10 minutes. If new items are received damaged, do not use, and email [email protected] for assistance.
Warning – Hot Parts – Handle hot parts and glass parts with care. Do not place hot parts on non-heat safe surfaces. Carefully attach protective heat-rated silicone caps to safely cover the hot end of glass parts. Allow the heating unit and hot parts to cool before placing them in a purse, pocket, or any container where damage from hot parts can occur. Not for use with e-liquids, tobacco, or tobacco products. Misuse can result in damage and voids all warranties. Unauthorized service performed voids all warranties. For assistance email [email protected].
Parts are made from strong scientific quality borosilicate glass, but all borosilicate glass is breakable so handle with care and caution. Avoid tapping on hard surfaces to prevent cracking and breaking. If glass is dropped or sustains an impact, examine for cracking, chipping and weakness before use. Do not expose hot glass parts to cold water or extreme temperature change as this may result in cracking and breaking. Safely dispose of damaged glass according to local regulations. Examine parts periodically for cracks, chipping and weakness from handling and drops.
Product contains electrical and delicate parts — do not drop. If dropped or otherwise damaged do not operate. To protect and prevent electric shock and/or fire never immerse or operate the product in or around any water and/or liquids. Do not stick or pour anything in the unit or place near flammable material. Do not store, operate or expose the unit and contents to extreme temperatures. Do not open the unit – doing so may cause electric shock and voids warranty.
Do not leave the unit turned on and left unattended.
The information contained in this manual is an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficacy or use of its preparation. This information is not intended in any way to replace or supersede professional consultations.
The information contained herein is for instructional and cautionary purposes only. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device, use unit only for its intended use.
Safety Certifications
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
Limitation of Liability (Read before use)
Failure to read or follow instructions, improper or careless use may lead to personal injury. Arizer and affiliated companies will not assume any liability for injury or damage resulting from the use or misuse of this device. Due to the fragility and nature of glass Arizer and affiliated companies are not responsible for cuts or injuries sustained from breakage. Arizer and affiliated companies are not liable for injuries or burns associated from touching hot parts. Arizer and affiliated companies are not liable for failures to comply with these warnings and safety guidelines. By purchasing this product the buyer assumes all risks associated with lithium batteries. If you do not agree with these conditions, return the product immediately before use.
This product is intended for use with the botanicals described herein — Arizer and affiliated companies are not liable for use with other than those botanicals described herein. Company’s liabilities for damages in connection with the product and its parts shall not exceed the purchase price of the product.
IMPORTANT – Obey local laws. Not all essential oils, botanicals and herbs are legal for use in every Country or State. Check your Local, State, Federal and Importation laws before ordering botanicals. This device is meant for legal use only.
Battery Safety and Warnings (Read before use)
Lithium batteries are volatile. Failure to read and follow these instructions may result in fire, personal injury and damage to property if charged or used improperly.
- Always handle your batteries with care – never drop the batteries or device.
- Fully charge your Air MAX Batteries before first use.
- Only use official Air MAX Batteries and Chargers. Do not use any third-party, counterfeit, or unknown brand batteries or chargers.
- Lithium batteries can explode or cause a fire if they are used incorrectly or if they are defective. Do not tamper with or misuse the Air MAX Batteries and do not use damaged and/or defective batteries.
- Air MAX Batteries are manufactured to strict quality standards, specifically for use with the Air MAX .
- Always match positive (+) and negative (-) when inserting batteries into theAir MAX and the Air MAX Battery Chargers.
- Batteries that are not in use should be stored in a safe, cool, dry place, individually in a plastic holder or container away from all metal objects.
- Do not store your batteries fully charged or fully drained for extended periods of time (one month or longer).
Never throw away the Air MAX Batteries and never put them into a battery collection box. If you have dropped the battery or notice physical damage you should take the following steps:
- 1.Store the battery in a safe, dry place and leave it for at least one hour in case there is a short circuit and the battery starts heating up.
- 2.Check to see if the battery has become hot. If so, leave the battery until it has cooled off, and then dispose according to local laws and regulations.
Counterfeit and Inferior – Quality Battery Warning:
- Customers are urged to be careful when purchasing batteries due to the flood of counterfeit and inferior-quality batteries for sale often found on online-auction and various websites.
- The use of counterfeit or inferior-quality lithium batteries can cause internal shorts leading to fires and explosions which can result in property damage and personal injury.
- The use of counterfeit or inferior-quality batteries could greatly reduce runtime and output performance, damage your Air MAX, constitute a safety hazard, and voids all warranties.
If you experience an issue with your Air MAX send an email to [email protected] and an expert Arizer customer service representative will reply as soon as possible to troubleshoot and determine the best way to resolve any issues. To help expedite your service request please include a description of the problem, your full name, your shipping address, the serial number on the bottom of your device, and a copy of your sales receipt.
The Air MAX itself is essentially maintenance free so you can spend your time using it instead of cleaning it! Simply recharge or replace the battery when it is low, swap out pre-loaded Glass Aroma Tubes on the go without fiddling with emptying or cleaning bowls, and keep your herbs and botanicals contained in the removable Glass Aroma Tubes that can be cleaned effortlessly! After numerous uses the glass parts should be cleaned to ensure optimal performance. To clean the glass parts, soak them in isopropyl (rubbing) alcohol for a couple hours then rinse with hot water. In most cases doing this will clean the Glass Aroma Tubes as good as new, but if not simply repeat as necessary. After cleaning, always ensure the Glass Aroma Tubes are fully dry before use.
Air MAX Support
All the topics and information you need for the Air MAX.
- 1 x Air MAX Portable Micro-Heater
- 1 x Air MAX Battery
- 1 x Air MAX USB-C Charger / Power Adapter
- 1 x Air MAX Glass Aroma Tube (70mm)
- 1 x Air MAX Frosted Glass Aroma Tube (14mm)
- 1 x Air MAX Glass Aroma Dish
- 2 x Air MAX Silicone Stem Caps
- 2 x Air MAX PVC Travel Tube w./ Cap (70mm Size)
- 1 x Air MAX PVC Travel Tube w./ Cap (Aroma Dish Size)
- 1 x Air MAX Stainless Steel Stirring Tool
- 4 x Air MAX Stainless Steel Filter Screens
- 1 x Air MAX Owner’s Manual
Arizer Batteries meet rigorous quality standards. With normal use they will last for hundreds of charge cycles before losing any capacity. Dropping the battery or the unit can result in battery damage that may limit or reduce the battery capacity quickly, so it is important to handle the batteries and your unit carefully.
Battery Charge
Depending on the temperature setting and general usage patterns the Air MAX battery will typically last for 2 hours and 15 minutes of use per charge. The battery will take approximately 3 hours to fully charge, or longer if you use it while charging.
Use While Charging
If your battery is running low, with the Air MAX you don’t have to wait for the battery to fully charge before you can use it. Just partially charge the battery (15-20 minutes) and then you can set the temperature and use the Air MAX while the battery continues charging. Note: The Air MAX will not operate if the battery is completely drained.
Battery Conservation
The Air MAX and Air MAX Chargers have built-in protections to prevent the battery from being overcharged or drained too low. To conserve battery life, use the Air MAX in a temperature-controlled environment and use lower temperature settings. When outdoors, stay sheltered from the elements and avoid using in extremely cold temperatures. Charge the battery as necessary. Do not store the battery fully charged or fully drained for longer than one month (store with partial charge).
Battery Replacement
The Air MAX Battery is a high-capacity, long life battery, and will last for a long time, even with prolonged / regular use. Spare/replacement Air MAX batteries are available for purchase at www.arizer.com
Safety Disclaimer
Arizer Batteries should not be substituted for third-party batteries — Only use official Air MAX Batteries with your Air MAX. We cannot verify the quality or safety of other batteries, and using third-party batteries can result in personal injury, electric shock, and damage to the device which is not covered under warranty.
The Control Panel consists of the OLED Display Screen and three buttons: the single Menu (M) button on the left side and the plus (+) and minus (-) buttons on the right side.
The Air MAX has two display modes:
Normal Mode – Use Normal Mode for full display and complete Custom Session Settings.
Dark Mode – Use Dark Mode for discrete, low-light display and customizable dark settings.
Normal Mode Settings
Use the Menu button to navigate through the different settings, then use the plus (+) and minus (-) buttons to adjust them.
Temperature Alert
The Air MAX’s optimized heating system warms up in under a minute and has a wide temperature range of 50° C – 220° C (122° F – 428° F). The temperature is adjustable in 1-degree increments and 10-degree increments.
Audio / Beep
This function has three volume settings and can also be turned off. If the Audio / Beep is activated, a beep will be heard when the Air MAX is powered on or off.
Temperature Alert
This function has three volume settings and can also be turned off. If the Temperature Alert is activated, two beeps will be heard when the set temperature is reached.
Automatic Shut-Off Timer
The automatic shut-off timer safety feature ensures you don’t forget to turn off the unit and helps conserve battery life. The shut-off timer can be adjusted between 5 – 15 minutes in one-minute increments. The default setting is 10-minutes.
Celsius or Fahrenheit
The Air MAX display can be set to Celsius or Fahrenheit. The default setting is Celsius.
Display Brightness
The unit’s display has three brightness settings: low, medium, and high. The default setting is high.
Power-On Delay
The power-on delay safety feature ensures you don’t accidentally turn on the unit and has four settings for your convenience: 2 Seconds, 4 Seconds, 6 Seconds, and 8 Seconds. The default setting is 6 seconds.
Automatic Display Inversion
Turn the unit upside down and the display automatically inverts.
Dark Mode Settings
Use the Menu (M) button to navigate through the different settings, then use the plus (+) and minus (-) buttons to adjust them.
Temperature Settings – Adjust in 1-degree increments and 10-degree increments. Default setting is 200° C.
Audio / Beep – This function has two options (Low and Off). Default setting is Off.
Temperature Alert – This function has two options (Low and Off). Default setting is Off.
Automatic Shut-Off Timer – This function can be adjusted between 5 – 15 minutes in one-minute increments. The default setting is 10-minutes.
Celsius or Fahrenheit – This feature cannot be changed in Dark Mode.
Display Brightness – In Dark Mode, screen brightness is always low. This setting is not displayed in the menu and cannot be adjusted.
Power-On Delay – This safety feature has four settings: 2, Seconds, 4 Seconds, 6 Seconds, and 8 Seconds. The default setting is 4 seconds.
Automatic Display Inversion – Turn the unit upside down and the display automatically inverts.
Important:
Dark Mode settings are independent and stored separately from Normal Mode settings.
Dark Mode
In Dark Mode, small icons represent the functions:
(circle) Top Right Corner: Power On Delay.
(square) Top Left Corner: Idle.
(plus) Bottom Left Corner: Heating.
(triangle) Bottom Right Corner: Ready for Use.
A full range of parts and accessories to equip and protect your Air II are available for purchase here.
If you can’t find the part you need send us an email to: [email protected] with a description of the part you need.
The Air MAX is ulta-compact, lightweight, and completely portable, conveniently fitting in the palm of your hand, pocket, or purse.
- Weight: 160 grams
- Height: 128 mm
- Diameter: 30 mm
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
The Air MAX carries a lifetime warranty on the heating element, and a limited 2-Year warranty covering defects in materials or workmanship, excluding battery. Glass is not covered under warranty. Retain proof of purchase for warranty service. Warranty is non-transferrable, valid from the original date of purchase and does not extend or renew with service. Returning the product and costs incurred are the responsibility of the user. Arizer will repair or replace warrantied items at our discretion. The warranty does not cover units damaged by dropping, tampering, unauthorized service performed or attempted, modifying the unit, misuse or abuse.
First Time Use – Examine box contents to ensure all included parts are in good condition, not damaged from shipping. Check glass parts for cracks or breakage. Packaging materials, bags, and small parts may pose a choking hazard. Keep out of reach and use from children, minors and pets. Glass Aroma Tubes may fit tightly in the unit at first. If you are finding it difficult to insert a Glass Aroma Tube, turn on the Air MAX, set the temperature to 200° C, and let the unit heat for 1-2 minutes then try again. To burn off any residues from manufacturing and packaging, turn on the unit, set the temperature to 220° C, and let the unit heat for 5 – 10 minutes. If new items are received damaged, do not use, and email [email protected] for assistance.
Warning – Hot Parts – Handle hot parts and glass parts with care. Do not place hot parts on non-heat safe surfaces. Carefully attach protective heat-rated silicone caps to safely cover the hot end of glass parts. Allow the heating unit and hot parts to cool before placing them in a purse, pocket, or any container where damage from hot parts can occur. Not for use with e-liquids, tobacco, or tobacco products. Misuse can result in damage and voids all warranties. Unauthorized service performed voids all warranties. For assistance email [email protected].
Parts are made from strong scientific quality borosilicate glass, but all borosilicate glass is breakable so handle with care and caution. Avoid tapping on hard surfaces to prevent cracking and breaking. If glass is dropped or sustains an impact, examine for cracking, chipping and weakness before use. Do not expose hot glass parts to cold water or extreme temperature change as this may result in cracking and breaking. Safely dispose of damaged glass according to local regulations. Examine parts periodically for cracks, chipping and weakness from handling and drops.
Product contains electrical and delicate parts — do not drop. If dropped or otherwise damaged do not operate. To protect and prevent electric shock and/or fire never immerse or operate the product in or around any water and/or liquids. Do not stick or pour anything in the unit or place near flammable material. Do not store, operate or expose the unit and contents to extreme temperatures. Do not open the unit – doing so may cause electric shock and voids warranty.
Do not leave the unit turned on and left unattended.
The information contained in this manual is an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficacy or use of its preparation. This information is not intended in any way to replace or supersede professional consultations.
The information contained herein is for instructional and cautionary purposes only. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device, use unit only for its intended use.
Safety Certifications
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
First Time Use – Examine box contents to ensure all included parts are in good condition, not damaged from shipping. Check glass parts for cracks or breakage. Packaging materials, bags, and small parts may pose a choking hazard. Keep out of reach and use from children, minors and pets. Glass Aroma Tubes may fit tightly in the unit at first. If you are finding it difficult to insert a Glass Aroma Tube, turn on the Air MAX, set the temperature to 200° C, and let the unit heat for 1-2 minutes then try again. To burn off any residues from manufacturing and packaging, turn on the unit, set the temperature to 220° C, and let the unit heat for 5 – 10 minutes. If new items are received damaged, do not use, and email [email protected] for assistance.
Warning – Hot Parts – Handle hot parts and glass parts with care. Do not place hot parts on non-heat safe surfaces. Carefully attach protective heat-rated silicone caps to safely cover the hot end of glass parts. Allow the heating unit and hot parts to cool before placing them in a purse, pocket, or any container where damage from hot parts can occur. Not for use with e-liquids, tobacco, or tobacco products. Misuse can result in damage and voids all warranties. Unauthorized service performed voids all warranties. For assistance email [email protected].
Parts are made from strong scientific quality borosilicate glass, but all borosilicate glass is breakable so handle with care and caution. Avoid tapping on hard surfaces to prevent cracking and breaking. If glass is dropped or sustains an impact, examine for cracking, chipping and weakness before use. Do not expose hot glass parts to cold water or extreme temperature change as this may result in cracking and breaking. Safely dispose of damaged glass according to local regulations. Examine parts periodically for cracks, chipping and weakness from handling and drops.
Product contains electrical and delicate parts — do not drop. If dropped or otherwise damaged do not operate. To protect and prevent electric shock and/or fire never immerse or operate the product in or around any water and/or liquids. Do not stick or pour anything in the unit or place near flammable material. Do not store, operate or expose the unit and contents to extreme temperatures. Do not open the unit – doing so may cause electric shock and voids warranty.
Do not leave the unit turned on and left unattended.
The information contained in this manual is an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficacy or use of its preparation. This information is not intended in any way to replace or supersede professional consultations.
The information contained herein is for instructional and cautionary purposes only. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device, use unit only for its intended use.
Safety Certifications
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
Limitation of Liability (Read before use)
Failure to read or follow instructions, improper or careless use may lead to personal injury. Arizer and affiliated companies will not assume any liability for injury or damage resulting from the use or misuse of this device. Due to the fragility and nature of glass Arizer and affiliated companies are not responsible for cuts or injuries sustained from breakage. Arizer and affiliated companies are not liable for injuries or burns associated from touching hot parts. Arizer and affiliated companies are not liable for failures to comply with these warnings and safety guidelines. By purchasing this product the buyer assumes all risks associated with lithium batteries. If you do not agree with these conditions, return the product immediately before use.
This product is intended for use with the botanicals described herein — Arizer and affiliated companies are not liable for use with other than those botanicals described herein. Company’s liabilities for damages in connection with the product and its parts shall not exceed the purchase price of the product.
IMPORTANT – Obey local laws. Not all essential oils, botanicals and herbs are legal for use in every Country or State. Check your Local, State, Federal and Importation laws before ordering botanicals. This device is meant for legal use only.
Battery Safety and Warnings (Read before use)
Lithium batteries are volatile. Failure to read and follow these instructions may result in fire, personal injury and damage to property if charged or used improperly.
- Always handle your batteries with care – never drop the batteries or device.
- Fully charge your Air MAX Batteries before first use.
- Only use official Air MAX Batteries and Chargers. Do not use any third-party, counterfeit, or unknown brand batteries or chargers.
- Lithium batteries can explode or cause a fire if they are used incorrectly or if they are defective. Do not tamper with or misuse the Air MAX Batteries and do not use damaged and/or defective batteries.
- Air MAX Batteries are manufactured to strict quality standards, specifically for use with the Air MAX .
- Always match positive (+) and negative (-) when inserting batteries into theAir MAX and the Air MAX Battery Chargers.
- Batteries that are not in use should be stored in a safe, cool, dry place, individually in a plastic holder or container away from all metal objects.
- Do not store your batteries fully charged or fully drained for extended periods of time (one month or longer).
Never throw away the Air MAX Batteries and never put them into a battery collection box. If you have dropped the battery or notice physical damage you should take the following steps:
- 1.Store the battery in a safe, dry place and leave it for at least one hour in case there is a short circuit and the battery starts heating up.
- 2.Check to see if the battery has become hot. If so, leave the battery until it has cooled off, and then dispose according to local laws and regulations.
Counterfeit and Inferior – Quality Battery Warning:
- Customers are urged to be careful when purchasing batteries due to the flood of counterfeit and inferior-quality batteries for sale often found on online-auction and various websites.
- The use of counterfeit or inferior-quality lithium batteries can cause internal shorts leading to fires and explosions which can result in property damage and personal injury.
- The use of counterfeit or inferior-quality batteries could greatly reduce runtime and output performance, damage your Air MAX, constitute a safety hazard, and voids all warranties.
If you experience an issue with your Air MAX send an email to [email protected] and an expert Arizer customer service representative will reply as soon as possible to troubleshoot and determine the best way to resolve any issues. To help expedite your service request please include a description of the problem, your full name, your shipping address, the serial number on the bottom of your device, and a copy of your sales receipt.
The Air MAX itself is essentially maintenance free so you can spend your time using it instead of cleaning it! Simply recharge or replace the battery when it is low, swap out pre-loaded Glass Aroma Tubes on the go without fiddling with emptying or cleaning bowls, and keep your herbs and botanicals contained in the removable Glass Aroma Tubes that can be cleaned effortlessly! After numerous uses the glass parts should be cleaned to ensure optimal performance. To clean the glass parts, soak them in isopropyl (rubbing) alcohol for a couple hours then rinse with hot water. In most cases doing this will clean the Glass Aroma Tubes as good as new, but if not simply repeat as necessary. After cleaning, always ensure the Glass Aroma Tubes are fully dry before use.
Air MAX Support
All the topics and information you need for the Air MAX.
- 1 x Air MAX Portable Micro-Heater
- 1 x Air MAX Battery
- 1 x Air MAX USB-C Charger / Power Adapter
- 1 x Air MAX Glass Aroma Tube (70mm)
- 1 x Air MAX Frosted Glass Aroma Tube (14mm)
- 1 x Air MAX Glass Aroma Dish
- 2 x Air MAX Silicone Stem Caps
- 2 x Air MAX PVC Travel Tube w./ Cap (70mm Size)
- 1 x Air MAX PVC Travel Tube w./ Cap (Aroma Dish Size)
- 1 x Air MAX Stainless Steel Stirring Tool
- 4 x Air MAX Stainless Steel Filter Screens
- 1 x Air MAX Owner’s Manual
Arizer Batteries meet rigorous quality standards. With normal use they will last for hundreds of charge cycles before losing any capacity. Dropping the battery or the unit can result in battery damage that may limit or reduce the battery capacity quickly, so it is important to handle the batteries and your unit carefully.
Battery Charge
Depending on the temperature setting and general usage patterns the Air MAX battery will typically last for 2 hours and 15 minutes of use per charge. The battery will take approximately 3 hours to fully charge, or longer if you use it while charging.
Use While Charging
If your battery is running low, with the Air MAX you don’t have to wait for the battery to fully charge before you can use it. Just partially charge the battery (15-20 minutes) and then you can set the temperature and use the Air MAX while the battery continues charging. Note: The Air MAX will not operate if the battery is completely drained.
Battery Conservation
The Air MAX and Air MAX Chargers have built-in protections to prevent the battery from being overcharged or drained too low. To conserve battery life, use the Air MAX in a temperature-controlled environment and use lower temperature settings. When outdoors, stay sheltered from the elements and avoid using in extremely cold temperatures. Charge the battery as necessary. Do not store the battery fully charged or fully drained for longer than one month (store with partial charge).
Battery Replacement
The Air MAX Battery is a high-capacity, long life battery, and will last for a long time, even with prolonged / regular use. Spare/replacement Air MAX batteries are available for purchase at www.arizer.com
Safety Disclaimer
Arizer Batteries should not be substituted for third-party batteries — Only use official Air MAX Batteries with your Air MAX. We cannot verify the quality or safety of other batteries, and using third-party batteries can result in personal injury, electric shock, and damage to the device which is not covered under warranty.
The Control Panel consists of the OLED Display Screen and three buttons: the single Menu (M) button on the left side and the plus (+) and minus (-) buttons on the right side.
The Air MAX has two display modes:
Normal Mode – Use Normal Mode for full display and complete Custom Session Settings.
Dark Mode – Use Dark Mode for discrete, low-light display and customizable dark settings.
Normal Mode Settings
Use the Menu button to navigate through the different settings, then use the plus (+) and minus (-) buttons to adjust them.
Temperature Alert
The Air MAX’s optimized heating system warms up in under a minute and has a wide temperature range of 50° C – 220° C (122° F – 428° F). The temperature is adjustable in 1-degree increments and 10-degree increments.
Audio / Beep
This function has three volume settings and can also be turned off. If the Audio / Beep is activated, a beep will be heard when the Air MAX is powered on or off.
Temperature Alert
This function has three volume settings and can also be turned off. If the Temperature Alert is activated, two beeps will be heard when the set temperature is reached.
Automatic Shut-Off Timer
The automatic shut-off timer safety feature ensures you don’t forget to turn off the unit and helps conserve battery life. The shut-off timer can be adjusted between 5 – 15 minutes in one-minute increments. The default setting is 10-minutes.
Celsius or Fahrenheit
The Air MAX display can be set to Celsius or Fahrenheit. The default setting is Celsius.
Display Brightness
The unit’s display has three brightness settings: low, medium, and high. The default setting is high.
Power-On Delay
The power-on delay safety feature ensures you don’t accidentally turn on the unit and has four settings for your convenience: 2 Seconds, 4 Seconds, 6 Seconds, and 8 Seconds. The default setting is 6 seconds.
Automatic Display Inversion
Turn the unit upside down and the display automatically inverts.
Dark Mode Settings
Use the Menu (M) button to navigate through the different settings, then use the plus (+) and minus (-) buttons to adjust them.
Temperature Settings – Adjust in 1-degree increments and 10-degree increments. Default setting is 200° C.
Audio / Beep – This function has two options (Low and Off). Default setting is Off.
Temperature Alert – This function has two options (Low and Off). Default setting is Off.
Automatic Shut-Off Timer – This function can be adjusted between 5 – 15 minutes in one-minute increments. The default setting is 10-minutes.
Celsius or Fahrenheit – This feature cannot be changed in Dark Mode.
Display Brightness – In Dark Mode, screen brightness is always low. This setting is not displayed in the menu and cannot be adjusted.
Power-On Delay – This safety feature has four settings: 2, Seconds, 4 Seconds, 6 Seconds, and 8 Seconds. The default setting is 4 seconds.
Automatic Display Inversion – Turn the unit upside down and the display automatically inverts.
Important:
Dark Mode settings are independent and stored separately from Normal Mode settings.
Dark Mode
In Dark Mode, small icons represent the functions:
(circle) Top Right Corner: Power On Delay.
(square) Top Left Corner: Idle.
(plus) Bottom Left Corner: Heating.
(triangle) Bottom Right Corner: Ready for Use.
A full range of parts and accessories to equip and protect your Air II are available for purchase here.
If you can’t find the part you need send us an email to: [email protected] with a description of the part you need.
The Air MAX is ulta-compact, lightweight, and completely portable, conveniently fitting in the palm of your hand, pocket, or purse.
- Weight: 160 grams
- Height: 128 mm
- Diameter: 30 mm
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
The Air MAX carries a lifetime warranty on the heating element, and a limited 2-Year warranty covering defects in materials or workmanship, excluding battery. Glass is not covered under warranty. Retain proof of purchase for warranty service. Warranty is non-transferrable, valid from the original date of purchase and does not extend or renew with service. Returning the product and costs incurred are the responsibility of the user. Arizer will repair or replace warrantied items at our discretion. The warranty does not cover units damaged by dropping, tampering, unauthorized service performed or attempted, modifying the unit, misuse or abuse.
First Time Use – Examine box contents to ensure all included parts are in good condition, not damaged from shipping. Check glass parts for cracks or breakage. Packaging materials, bags, and small parts may pose a choking hazard. Keep out of reach and use from children, minors and pets. Glass Aroma Tubes may fit tightly in the unit at first. If you are finding it difficult to insert a Glass Aroma Tube, turn on the Air MAX, set the temperature to 200° C, and let the unit heat for 1-2 minutes then try again. To burn off any residues from manufacturing and packaging, turn on the unit, set the temperature to 220° C, and let the unit heat for 5 – 10 minutes. If new items are received damaged, do not use, and email [email protected] for assistance.
Warning – Hot Parts – Handle hot parts and glass parts with care. Do not place hot parts on non-heat safe surfaces. Carefully attach protective heat-rated silicone caps to safely cover the hot end of glass parts. Allow the heating unit and hot parts to cool before placing them in a purse, pocket, or any container where damage from hot parts can occur. Not for use with e-liquids, tobacco, or tobacco products. Misuse can result in damage and voids all warranties. Unauthorized service performed voids all warranties. For assistance email [email protected].
Parts are made from strong scientific quality borosilicate glass, but all borosilicate glass is breakable so handle with care and caution. Avoid tapping on hard surfaces to prevent cracking and breaking. If glass is dropped or sustains an impact, examine for cracking, chipping and weakness before use. Do not expose hot glass parts to cold water or extreme temperature change as this may result in cracking and breaking. Safely dispose of damaged glass according to local regulations. Examine parts periodically for cracks, chipping and weakness from handling and drops.
Product contains electrical and delicate parts — do not drop. If dropped or otherwise damaged do not operate. To protect and prevent electric shock and/or fire never immerse or operate the product in or around any water and/or liquids. Do not stick or pour anything in the unit or place near flammable material. Do not store, operate or expose the unit and contents to extreme temperatures. Do not open the unit – doing so may cause electric shock and voids warranty.
Do not leave the unit turned on and left unattended.
The information contained in this manual is an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficacy or use of its preparation. This information is not intended in any way to replace or supersede professional consultations.
The information contained herein is for instructional and cautionary purposes only. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device, use unit only for its intended use.
Safety Certifications
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
First Time Use – Examine box contents to ensure all included parts are in good condition, not damaged from shipping. Check glass parts for cracks or breakage. Packaging materials, bags, and small parts may pose a choking hazard. Keep out of reach and use from children, minors and pets. Glass Aroma Tubes may fit tightly in the unit at first. If you are finding it difficult to insert a Glass Aroma Tube, turn on the Air MAX, set the temperature to 200° C, and let the unit heat for 1-2 minutes then try again. To burn off any residues from manufacturing and packaging, turn on the unit, set the temperature to 220° C, and let the unit heat for 5 – 10 minutes. If new items are received damaged, do not use, and email [email protected] for assistance.
Warning – Hot Parts – Handle hot parts and glass parts with care. Do not place hot parts on non-heat safe surfaces. Carefully attach protective heat-rated silicone caps to safely cover the hot end of glass parts. Allow the heating unit and hot parts to cool before placing them in a purse, pocket, or any container where damage from hot parts can occur. Not for use with e-liquids, tobacco, or tobacco products. Misuse can result in damage and voids all warranties. Unauthorized service performed voids all warranties. For assistance email [email protected].
Parts are made from strong scientific quality borosilicate glass, but all borosilicate glass is breakable so handle with care and caution. Avoid tapping on hard surfaces to prevent cracking and breaking. If glass is dropped or sustains an impact, examine for cracking, chipping and weakness before use. Do not expose hot glass parts to cold water or extreme temperature change as this may result in cracking and breaking. Safely dispose of damaged glass according to local regulations. Examine parts periodically for cracks, chipping and weakness from handling and drops.
Product contains electrical and delicate parts — do not drop. If dropped or otherwise damaged do not operate. To protect and prevent electric shock and/or fire never immerse or operate the product in or around any water and/or liquids. Do not stick or pour anything in the unit or place near flammable material. Do not store, operate or expose the unit and contents to extreme temperatures. Do not open the unit – doing so may cause electric shock and voids warranty.
Do not leave the unit turned on and left unattended.
The information contained in this manual is an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficacy or use of its preparation. This information is not intended in any way to replace or supersede professional consultations.
The information contained herein is for instructional and cautionary purposes only. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device, use unit only for its intended use.
Safety Certifications
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
Limitation of Liability (Read before use)
Failure to read or follow instructions, improper or careless use may lead to personal injury. Arizer and affiliated companies will not assume any liability for injury or damage resulting from the use or misuse of this device. Due to the fragility and nature of glass Arizer and affiliated companies are not responsible for cuts or injuries sustained from breakage. Arizer and affiliated companies are not liable for injuries or burns associated from touching hot parts. Arizer and affiliated companies are not liable for failures to comply with these warnings and safety guidelines. By purchasing this product the buyer assumes all risks associated with lithium batteries. If you do not agree with these conditions, return the product immediately before use.
This product is intended for use with the botanicals described herein — Arizer and affiliated companies are not liable for use with other than those botanicals described herein. Company’s liabilities for damages in connection with the product and its parts shall not exceed the purchase price of the product.
IMPORTANT – Obey local laws. Not all essential oils, botanicals and herbs are legal for use in every Country or State. Check your Local, State, Federal and Importation laws before ordering botanicals. This device is meant for legal use only.
Battery Safety and Warnings (Read before use)
Lithium batteries are volatile. Failure to read and follow these instructions may result in fire, personal injury and damage to property if charged or used improperly.
- Always handle your batteries with care – never drop the batteries or device.
- Fully charge your Air MAX Batteries before first use.
- Only use official Air MAX Batteries and Chargers. Do not use any third-party, counterfeit, or unknown brand batteries or chargers.
- Lithium batteries can explode or cause a fire if they are used incorrectly or if they are defective. Do not tamper with or misuse the Air MAX Batteries and do not use damaged and/or defective batteries.
- Air MAX Batteries are manufactured to strict quality standards, specifically for use with the Air MAX .
- Always match positive (+) and negative (-) when inserting batteries into theAir MAX and the Air MAX Battery Chargers.
- Batteries that are not in use should be stored in a safe, cool, dry place, individually in a plastic holder or container away from all metal objects.
- Do not store your batteries fully charged or fully drained for extended periods of time (one month or longer).
Never throw away the Air MAX Batteries and never put them into a battery collection box. If you have dropped the battery or notice physical damage you should take the following steps:
- 1.Store the battery in a safe, dry place and leave it for at least one hour in case there is a short circuit and the battery starts heating up.
- 2.Check to see if the battery has become hot. If so, leave the battery until it has cooled off, and then dispose according to local laws and regulations.
Counterfeit and Inferior – Quality Battery Warning:
- Customers are urged to be careful when purchasing batteries due to the flood of counterfeit and inferior-quality batteries for sale often found on online-auction and various websites.
- The use of counterfeit or inferior-quality lithium batteries can cause internal shorts leading to fires and explosions which can result in property damage and personal injury.
- The use of counterfeit or inferior-quality batteries could greatly reduce runtime and output performance, damage your Air MAX, constitute a safety hazard, and voids all warranties.
If you experience an issue with your Air MAX send an email to [email protected] and an expert Arizer customer service representative will reply as soon as possible to troubleshoot and determine the best way to resolve any issues. To help expedite your service request please include a description of the problem, your full name, your shipping address, the serial number on the bottom of your device, and a copy of your sales receipt.
The Air MAX itself is essentially maintenance free so you can spend your time using it instead of cleaning it! Simply recharge or replace the battery when it is low, swap out pre-loaded Glass Aroma Tubes on the go without fiddling with emptying or cleaning bowls, and keep your herbs and botanicals contained in the removable Glass Aroma Tubes that can be cleaned effortlessly! After numerous uses the glass parts should be cleaned to ensure optimal performance. To clean the glass parts, soak them in isopropyl (rubbing) alcohol for a couple hours then rinse with hot water. In most cases doing this will clean the Glass Aroma Tubes as good as new, but if not simply repeat as necessary. After cleaning, always ensure the Glass Aroma Tubes are fully dry before use.
Air MAX Support
All the topics and information you need for the Air MAX.
- 1 x Air MAX Portable Micro-Heater
- 1 x Air MAX Battery
- 1 x Air MAX USB-C Charger / Power Adapter
- 1 x Air MAX Glass Aroma Tube (70mm)
- 1 x Air MAX Frosted Glass Aroma Tube (14mm)
- 1 x Air MAX Glass Aroma Dish
- 2 x Air MAX Silicone Stem Caps
- 2 x Air MAX PVC Travel Tube w./ Cap (70mm Size)
- 1 x Air MAX PVC Travel Tube w./ Cap (Aroma Dish Size)
- 1 x Air MAX Stainless Steel Stirring Tool
- 4 x Air MAX Stainless Steel Filter Screens
- 1 x Air MAX Owner’s Manual
Arizer Batteries meet rigorous quality standards. With normal use they will last for hundreds of charge cycles before losing any capacity. Dropping the battery or the unit can result in battery damage that may limit or reduce the battery capacity quickly, so it is important to handle the batteries and your unit carefully.
Battery Charge
Depending on the temperature setting and general usage patterns the Air MAX battery will typically last for 2 hours and 15 minutes of use per charge. The battery will take approximately 3 hours to fully charge, or longer if you use it while charging.
Use While Charging
If your battery is running low, with the Air MAX you don’t have to wait for the battery to fully charge before you can use it. Just partially charge the battery (15-20 minutes) and then you can set the temperature and use the Air MAX while the battery continues charging. Note: The Air MAX will not operate if the battery is completely drained.
Battery Conservation
The Air MAX and Air MAX Chargers have built-in protections to prevent the battery from being overcharged or drained too low. To conserve battery life, use the Air MAX in a temperature-controlled environment and use lower temperature settings. When outdoors, stay sheltered from the elements and avoid using in extremely cold temperatures. Charge the battery as necessary. Do not store the battery fully charged or fully drained for longer than one month (store with partial charge).
Battery Replacement
The Air MAX Battery is a high-capacity, long life battery, and will last for a long time, even with prolonged / regular use. Spare/replacement Air MAX batteries are available for purchase at www.arizer.com
Safety Disclaimer
Arizer Batteries should not be substituted for third-party batteries — Only use official Air MAX Batteries with your Air MAX. We cannot verify the quality or safety of other batteries, and using third-party batteries can result in personal injury, electric shock, and damage to the device which is not covered under warranty.
The Control Panel consists of the OLED Display Screen and three buttons: the single Menu (M) button on the left side and the plus (+) and minus (-) buttons on the right side.
The Air MAX has two display modes:
Normal Mode – Use Normal Mode for full display and complete Custom Session Settings.
Dark Mode – Use Dark Mode for discrete, low-light display and customizable dark settings.
Normal Mode Settings
Use the Menu button to navigate through the different settings, then use the plus (+) and minus (-) buttons to adjust them.
Temperature Alert
The Air MAX’s optimized heating system warms up in under a minute and has a wide temperature range of 50° C – 220° C (122° F – 428° F). The temperature is adjustable in 1-degree increments and 10-degree increments.
Audio / Beep
This function has three volume settings and can also be turned off. If the Audio / Beep is activated, a beep will be heard when the Air MAX is powered on or off.
Temperature Alert
This function has three volume settings and can also be turned off. If the Temperature Alert is activated, two beeps will be heard when the set temperature is reached.
Automatic Shut-Off Timer
The automatic shut-off timer safety feature ensures you don’t forget to turn off the unit and helps conserve battery life. The shut-off timer can be adjusted between 5 – 15 minutes in one-minute increments. The default setting is 10-minutes.
Celsius or Fahrenheit
The Air MAX display can be set to Celsius or Fahrenheit. The default setting is Celsius.
Display Brightness
The unit’s display has three brightness settings: low, medium, and high. The default setting is high.
Power-On Delay
The power-on delay safety feature ensures you don’t accidentally turn on the unit and has four settings for your convenience: 2 Seconds, 4 Seconds, 6 Seconds, and 8 Seconds. The default setting is 6 seconds.
Automatic Display Inversion
Turn the unit upside down and the display automatically inverts.
Dark Mode Settings
Use the Menu (M) button to navigate through the different settings, then use the plus (+) and minus (-) buttons to adjust them.
Temperature Settings – Adjust in 1-degree increments and 10-degree increments. Default setting is 200° C.
Audio / Beep – This function has two options (Low and Off). Default setting is Off.
Temperature Alert – This function has two options (Low and Off). Default setting is Off.
Automatic Shut-Off Timer – This function can be adjusted between 5 – 15 minutes in one-minute increments. The default setting is 10-minutes.
Celsius or Fahrenheit – This feature cannot be changed in Dark Mode.
Display Brightness – In Dark Mode, screen brightness is always low. This setting is not displayed in the menu and cannot be adjusted.
Power-On Delay – This safety feature has four settings: 2, Seconds, 4 Seconds, 6 Seconds, and 8 Seconds. The default setting is 4 seconds.
Automatic Display Inversion – Turn the unit upside down and the display automatically inverts.
Important:
Dark Mode settings are independent and stored separately from Normal Mode settings.
Dark Mode
In Dark Mode, small icons represent the functions:
(circle) Top Right Corner: Power On Delay.
(square) Top Left Corner: Idle.
(plus) Bottom Left Corner: Heating.
(triangle) Bottom Right Corner: Ready for Use.
A full range of parts and accessories to equip and protect your Air II are available for purchase here.
If you can’t find the part you need send us an email to: [email protected] with a description of the part you need.
The Air MAX is ulta-compact, lightweight, and completely portable, conveniently fitting in the palm of your hand, pocket, or purse.
- Weight: 160 grams
- Height: 128 mm
- Diameter: 30 mm
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
The Air MAX carries a lifetime warranty on the heating element, and a limited 2-Year warranty covering defects in materials or workmanship, excluding battery. Glass is not covered under warranty. Retain proof of purchase for warranty service. Warranty is non-transferrable, valid from the original date of purchase and does not extend or renew with service. Returning the product and costs incurred are the responsibility of the user. Arizer will repair or replace warrantied items at our discretion. The warranty does not cover units damaged by dropping, tampering, unauthorized service performed or attempted, modifying the unit, misuse or abuse.
First Time Use – Examine box contents to ensure all included parts are in good condition, not damaged from shipping. Check glass parts for cracks or breakage. Packaging materials, bags, and small parts may pose a choking hazard. Keep out of reach and use from children, minors and pets. Glass Aroma Tubes may fit tightly in the unit at first. If you are finding it difficult to insert a Glass Aroma Tube, turn on the Air MAX, set the temperature to 200° C, and let the unit heat for 1-2 minutes then try again. To burn off any residues from manufacturing and packaging, turn on the unit, set the temperature to 220° C, and let the unit heat for 5 – 10 minutes. If new items are received damaged, do not use, and email [email protected] for assistance.
Warning – Hot Parts – Handle hot parts and glass parts with care. Do not place hot parts on non-heat safe surfaces. Carefully attach protective heat-rated silicone caps to safely cover the hot end of glass parts. Allow the heating unit and hot parts to cool before placing them in a purse, pocket, or any container where damage from hot parts can occur. Not for use with e-liquids, tobacco, or tobacco products. Misuse can result in damage and voids all warranties. Unauthorized service performed voids all warranties. For assistance email [email protected].
Parts are made from strong scientific quality borosilicate glass, but all borosilicate glass is breakable so handle with care and caution. Avoid tapping on hard surfaces to prevent cracking and breaking. If glass is dropped or sustains an impact, examine for cracking, chipping and weakness before use. Do not expose hot glass parts to cold water or extreme temperature change as this may result in cracking and breaking. Safely dispose of damaged glass according to local regulations. Examine parts periodically for cracks, chipping and weakness from handling and drops.
Product contains electrical and delicate parts — do not drop. If dropped or otherwise damaged do not operate. To protect and prevent electric shock and/or fire never immerse or operate the product in or around any water and/or liquids. Do not stick or pour anything in the unit or place near flammable material. Do not store, operate or expose the unit and contents to extreme temperatures. Do not open the unit – doing so may cause electric shock and voids warranty.
Do not leave the unit turned on and left unattended.
The information contained in this manual is an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficacy or use of its preparation. This information is not intended in any way to replace or supersede professional consultations.
The information contained herein is for instructional and cautionary purposes only. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device, use unit only for its intended use.
Safety Certifications
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
First Time Use – Examine box contents to ensure all included parts are in good condition, not damaged from shipping. Check glass parts for cracks or breakage. Packaging materials, bags, and small parts may pose a choking hazard. Keep out of reach and use from children, minors and pets. Glass Aroma Tubes may fit tightly in the unit at first. If you are finding it difficult to insert a Glass Aroma Tube, turn on the Air MAX, set the temperature to 200° C, and let the unit heat for 1-2 minutes then try again. To burn off any residues from manufacturing and packaging, turn on the unit, set the temperature to 220° C, and let the unit heat for 5 – 10 minutes. If new items are received damaged, do not use, and email [email protected] for assistance.
Warning – Hot Parts – Handle hot parts and glass parts with care. Do not place hot parts on non-heat safe surfaces. Carefully attach protective heat-rated silicone caps to safely cover the hot end of glass parts. Allow the heating unit and hot parts to cool before placing them in a purse, pocket, or any container where damage from hot parts can occur. Not for use with e-liquids, tobacco, or tobacco products. Misuse can result in damage and voids all warranties. Unauthorized service performed voids all warranties. For assistance email [email protected].
Parts are made from strong scientific quality borosilicate glass, but all borosilicate glass is breakable so handle with care and caution. Avoid tapping on hard surfaces to prevent cracking and breaking. If glass is dropped or sustains an impact, examine for cracking, chipping and weakness before use. Do not expose hot glass parts to cold water or extreme temperature change as this may result in cracking and breaking. Safely dispose of damaged glass according to local regulations. Examine parts periodically for cracks, chipping and weakness from handling and drops.
Product contains electrical and delicate parts — do not drop. If dropped or otherwise damaged do not operate. To protect and prevent electric shock and/or fire never immerse or operate the product in or around any water and/or liquids. Do not stick or pour anything in the unit or place near flammable material. Do not store, operate or expose the unit and contents to extreme temperatures. Do not open the unit – doing so may cause electric shock and voids warranty.
Do not leave the unit turned on and left unattended.
The information contained in this manual is an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficacy or use of its preparation. This information is not intended in any way to replace or supersede professional consultations.
The information contained herein is for instructional and cautionary purposes only. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device, use unit only for its intended use.
Safety Certifications
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
Limitation of Liability (Read before use)
Failure to read or follow instructions, improper or careless use may lead to personal injury. Arizer and affiliated companies will not assume any liability for injury or damage resulting from the use or misuse of this device. Due to the fragility and nature of glass Arizer and affiliated companies are not responsible for cuts or injuries sustained from breakage. Arizer and affiliated companies are not liable for injuries or burns associated from touching hot parts. Arizer and affiliated companies are not liable for failures to comply with these warnings and safety guidelines. By purchasing this product the buyer assumes all risks associated with lithium batteries. If you do not agree with these conditions, return the product immediately before use.
This product is intended for use with the botanicals described herein — Arizer and affiliated companies are not liable for use with other than those botanicals described herein. Company’s liabilities for damages in connection with the product and its parts shall not exceed the purchase price of the product.
IMPORTANT – Obey local laws. Not all essential oils, botanicals and herbs are legal for use in every Country or State. Check your Local, State, Federal and Importation laws before ordering botanicals. This device is meant for legal use only.
Battery Safety and Warnings (Read before use)
Lithium batteries are volatile. Failure to read and follow these instructions may result in fire, personal injury and damage to property if charged or used improperly.
- Always handle your batteries with care – never drop the batteries or device.
- Fully charge your Air MAX Batteries before first use.
- Only use official Air MAX Batteries and Chargers. Do not use any third-party, counterfeit, or unknown brand batteries or chargers.
- Lithium batteries can explode or cause a fire if they are used incorrectly or if they are defective. Do not tamper with or misuse the Air MAX Batteries and do not use damaged and/or defective batteries.
- Air MAX Batteries are manufactured to strict quality standards, specifically for use with the Air MAX .
- Always match positive (+) and negative (-) when inserting batteries into theAir MAX and the Air MAX Battery Chargers.
- Batteries that are not in use should be stored in a safe, cool, dry place, individually in a plastic holder or container away from all metal objects.
- Do not store your batteries fully charged or fully drained for extended periods of time (one month or longer).
Never throw away the Air MAX Batteries and never put them into a battery collection box. If you have dropped the battery or notice physical damage you should take the following steps:
- 1.Store the battery in a safe, dry place and leave it for at least one hour in case there is a short circuit and the battery starts heating up.
- 2.Check to see if the battery has become hot. If so, leave the battery until it has cooled off, and then dispose according to local laws and regulations.
Counterfeit and Inferior – Quality Battery Warning:
- Customers are urged to be careful when purchasing batteries due to the flood of counterfeit and inferior-quality batteries for sale often found on online-auction and various websites.
- The use of counterfeit or inferior-quality lithium batteries can cause internal shorts leading to fires and explosions which can result in property damage and personal injury.
- The use of counterfeit or inferior-quality batteries could greatly reduce runtime and output performance, damage your Air MAX, constitute a safety hazard, and voids all warranties.
If you experience an issue with your Air MAX send an email to [email protected] and an expert Arizer customer service representative will reply as soon as possible to troubleshoot and determine the best way to resolve any issues. To help expedite your service request please include a description of the problem, your full name, your shipping address, the serial number on the bottom of your device, and a copy of your sales receipt.
The Air MAX itself is essentially maintenance free so you can spend your time using it instead of cleaning it! Simply recharge or replace the battery when it is low, swap out pre-loaded Glass Aroma Tubes on the go without fiddling with emptying or cleaning bowls, and keep your herbs and botanicals contained in the removable Glass Aroma Tubes that can be cleaned effortlessly! After numerous uses the glass parts should be cleaned to ensure optimal performance. To clean the glass parts, soak them in isopropyl (rubbing) alcohol for a couple hours then rinse with hot water. In most cases doing this will clean the Glass Aroma Tubes as good as new, but if not simply repeat as necessary. After cleaning, always ensure the Glass Aroma Tubes are fully dry before use.
Air MAX Support
All the topics and information you need for the Air MAX.
- 1 x Air MAX Portable Micro-Heater
- 1 x Air MAX Battery
- 1 x Air MAX USB-C Charger / Power Adapter
- 1 x Air MAX Glass Aroma Tube (70mm)
- 1 x Air MAX Frosted Glass Aroma Tube (14mm)
- 1 x Air MAX Glass Aroma Dish
- 2 x Air MAX Silicone Stem Caps
- 2 x Air MAX PVC Travel Tube w./ Cap (70mm Size)
- 1 x Air MAX PVC Travel Tube w./ Cap (Aroma Dish Size)
- 1 x Air MAX Stainless Steel Stirring Tool
- 4 x Air MAX Stainless Steel Filter Screens
- 1 x Air MAX Owner’s Manual
Arizer Batteries meet rigorous quality standards. With normal use they will last for hundreds of charge cycles before losing any capacity. Dropping the battery or the unit can result in battery damage that may limit or reduce the battery capacity quickly, so it is important to handle the batteries and your unit carefully.
Battery Charge
Depending on the temperature setting and general usage patterns the Air MAX battery will typically last for 2 hours and 15 minutes of use per charge. The battery will take approximately 3 hours to fully charge, or longer if you use it while charging.
Use While Charging
If your battery is running low, with the Air MAX you don’t have to wait for the battery to fully charge before you can use it. Just partially charge the battery (15-20 minutes) and then you can set the temperature and use the Air MAX while the battery continues charging. Note: The Air MAX will not operate if the battery is completely drained.
Battery Conservation
The Air MAX and Air MAX Chargers have built-in protections to prevent the battery from being overcharged or drained too low. To conserve battery life, use the Air MAX in a temperature-controlled environment and use lower temperature settings. When outdoors, stay sheltered from the elements and avoid using in extremely cold temperatures. Charge the battery as necessary. Do not store the battery fully charged or fully drained for longer than one month (store with partial charge).
Battery Replacement
The Air MAX Battery is a high-capacity, long life battery, and will last for a long time, even with prolonged / regular use. Spare/replacement Air MAX batteries are available for purchase at www.arizer.com
Safety Disclaimer
Arizer Batteries should not be substituted for third-party batteries — Only use official Air MAX Batteries with your Air MAX. We cannot verify the quality or safety of other batteries, and using third-party batteries can result in personal injury, electric shock, and damage to the device which is not covered under warranty.
The Control Panel consists of the OLED Display Screen and three buttons: the single Menu (M) button on the left side and the plus (+) and minus (-) buttons on the right side.
The Air MAX has two display modes:
Normal Mode – Use Normal Mode for full display and complete Custom Session Settings.
Dark Mode – Use Dark Mode for discrete, low-light display and customizable dark settings.
Normal Mode Settings
Use the Menu button to navigate through the different settings, then use the plus (+) and minus (-) buttons to adjust them.
Temperature Alert
The Air MAX’s optimized heating system warms up in under a minute and has a wide temperature range of 50° C – 220° C (122° F – 428° F). The temperature is adjustable in 1-degree increments and 10-degree increments.
Audio / Beep
This function has three volume settings and can also be turned off. If the Audio / Beep is activated, a beep will be heard when the Air MAX is powered on or off.
Temperature Alert
This function has three volume settings and can also be turned off. If the Temperature Alert is activated, two beeps will be heard when the set temperature is reached.
Automatic Shut-Off Timer
The automatic shut-off timer safety feature ensures you don’t forget to turn off the unit and helps conserve battery life. The shut-off timer can be adjusted between 5 – 15 minutes in one-minute increments. The default setting is 10-minutes.
Celsius or Fahrenheit
The Air MAX display can be set to Celsius or Fahrenheit. The default setting is Celsius.
Display Brightness
The unit’s display has three brightness settings: low, medium, and high. The default setting is high.
Power-On Delay
The power-on delay safety feature ensures you don’t accidentally turn on the unit and has four settings for your convenience: 2 Seconds, 4 Seconds, 6 Seconds, and 8 Seconds. The default setting is 6 seconds.
Automatic Display Inversion
Turn the unit upside down and the display automatically inverts.
Dark Mode Settings
Use the Menu (M) button to navigate through the different settings, then use the plus (+) and minus (-) buttons to adjust them.
Temperature Settings – Adjust in 1-degree increments and 10-degree increments. Default setting is 200° C.
Audio / Beep – This function has two options (Low and Off). Default setting is Off.
Temperature Alert – This function has two options (Low and Off). Default setting is Off.
Automatic Shut-Off Timer – This function can be adjusted between 5 – 15 minutes in one-minute increments. The default setting is 10-minutes.
Celsius or Fahrenheit – This feature cannot be changed in Dark Mode.
Display Brightness – In Dark Mode, screen brightness is always low. This setting is not displayed in the menu and cannot be adjusted.
Power-On Delay – This safety feature has four settings: 2, Seconds, 4 Seconds, 6 Seconds, and 8 Seconds. The default setting is 4 seconds.
Automatic Display Inversion – Turn the unit upside down and the display automatically inverts.
Important:
Dark Mode settings are independent and stored separately from Normal Mode settings.
Dark Mode
In Dark Mode, small icons represent the functions:
(circle) Top Right Corner: Power On Delay.
(square) Top Left Corner: Idle.
(plus) Bottom Left Corner: Heating.
(triangle) Bottom Right Corner: Ready for Use.
A full range of parts and accessories to equip and protect your Air II are available for purchase here.
If you can’t find the part you need send us an email to: [email protected] with a description of the part you need.
The Air MAX is ulta-compact, lightweight, and completely portable, conveniently fitting in the palm of your hand, pocket, or purse.
- Weight: 160 grams
- Height: 128 mm
- Diameter: 30 mm
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
The Air MAX carries a lifetime warranty on the heating element, and a limited 2-Year warranty covering defects in materials or workmanship, excluding battery. Glass is not covered under warranty. Retain proof of purchase for warranty service. Warranty is non-transferrable, valid from the original date of purchase and does not extend or renew with service. Returning the product and costs incurred are the responsibility of the user. Arizer will repair or replace warrantied items at our discretion. The warranty does not cover units damaged by dropping, tampering, unauthorized service performed or attempted, modifying the unit, misuse or abuse.
First Time Use – Examine box contents to ensure all included parts are in good condition, not damaged from shipping. Check glass parts for cracks or breakage. Packaging materials, bags, and small parts may pose a choking hazard. Keep out of reach and use from children, minors and pets. Glass Aroma Tubes may fit tightly in the unit at first. If you are finding it difficult to insert a Glass Aroma Tube, turn on the Air MAX, set the temperature to 200° C, and let the unit heat for 1-2 minutes then try again. To burn off any residues from manufacturing and packaging, turn on the unit, set the temperature to 220° C, and let the unit heat for 5 – 10 minutes. If new items are received damaged, do not use, and email [email protected] for assistance.
Warning – Hot Parts – Handle hot parts and glass parts with care. Do not place hot parts on non-heat safe surfaces. Carefully attach protective heat-rated silicone caps to safely cover the hot end of glass parts. Allow the heating unit and hot parts to cool before placing them in a purse, pocket, or any container where damage from hot parts can occur. Not for use with e-liquids, tobacco, or tobacco products. Misuse can result in damage and voids all warranties. Unauthorized service performed voids all warranties. For assistance email [email protected].
Parts are made from strong scientific quality borosilicate glass, but all borosilicate glass is breakable so handle with care and caution. Avoid tapping on hard surfaces to prevent cracking and breaking. If glass is dropped or sustains an impact, examine for cracking, chipping and weakness before use. Do not expose hot glass parts to cold water or extreme temperature change as this may result in cracking and breaking. Safely dispose of damaged glass according to local regulations. Examine parts periodically for cracks, chipping and weakness from handling and drops.
Product contains electrical and delicate parts — do not drop. If dropped or otherwise damaged do not operate. To protect and prevent electric shock and/or fire never immerse or operate the product in or around any water and/or liquids. Do not stick or pour anything in the unit or place near flammable material. Do not store, operate or expose the unit and contents to extreme temperatures. Do not open the unit – doing so may cause electric shock and voids warranty.
Do not leave the unit turned on and left unattended.
The information contained in this manual is an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficacy or use of its preparation. This information is not intended in any way to replace or supersede professional consultations.
The information contained herein is for instructional and cautionary purposes only. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device, use unit only for its intended use.
Safety Certifications
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
First Time Use – Examine box contents to ensure all included parts are in good condition, not damaged from shipping. Check glass parts for cracks or breakage. Packaging materials, bags, and small parts may pose a choking hazard. Keep out of reach and use from children, minors and pets. Glass Aroma Tubes may fit tightly in the unit at first. If you are finding it difficult to insert a Glass Aroma Tube, turn on the Air MAX, set the temperature to 200° C, and let the unit heat for 1-2 minutes then try again. To burn off any residues from manufacturing and packaging, turn on the unit, set the temperature to 220° C, and let the unit heat for 5 – 10 minutes. If new items are received damaged, do not use, and email [email protected] for assistance.
Warning – Hot Parts – Handle hot parts and glass parts with care. Do not place hot parts on non-heat safe surfaces. Carefully attach protective heat-rated silicone caps to safely cover the hot end of glass parts. Allow the heating unit and hot parts to cool before placing them in a purse, pocket, or any container where damage from hot parts can occur. Not for use with e-liquids, tobacco, or tobacco products. Misuse can result in damage and voids all warranties. Unauthorized service performed voids all warranties. For assistance email [email protected].
Parts are made from strong scientific quality borosilicate glass, but all borosilicate glass is breakable so handle with care and caution. Avoid tapping on hard surfaces to prevent cracking and breaking. If glass is dropped or sustains an impact, examine for cracking, chipping and weakness before use. Do not expose hot glass parts to cold water or extreme temperature change as this may result in cracking and breaking. Safely dispose of damaged glass according to local regulations. Examine parts periodically for cracks, chipping and weakness from handling and drops.
Product contains electrical and delicate parts — do not drop. If dropped or otherwise damaged do not operate. To protect and prevent electric shock and/or fire never immerse or operate the product in or around any water and/or liquids. Do not stick or pour anything in the unit or place near flammable material. Do not store, operate or expose the unit and contents to extreme temperatures. Do not open the unit – doing so may cause electric shock and voids warranty.
Do not leave the unit turned on and left unattended.
The information contained in this manual is an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficacy or use of its preparation. This information is not intended in any way to replace or supersede professional consultations.
The information contained herein is for instructional and cautionary purposes only. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device, use unit only for its intended use.
Safety Certifications
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
Limitation of Liability (Read before use)
Failure to read or follow instructions, improper or careless use may lead to personal injury. Arizer and affiliated companies will not assume any liability for injury or damage resulting from the use or misuse of this device. Due to the fragility and nature of glass Arizer and affiliated companies are not responsible for cuts or injuries sustained from breakage. Arizer and affiliated companies are not liable for injuries or burns associated from touching hot parts. Arizer and affiliated companies are not liable for failures to comply with these warnings and safety guidelines. By purchasing this product the buyer assumes all risks associated with lithium batteries. If you do not agree with these conditions, return the product immediately before use.
This product is intended for use with the botanicals described herein — Arizer and affiliated companies are not liable for use with other than those botanicals described herein. Company’s liabilities for damages in connection with the product and its parts shall not exceed the purchase price of the product.
IMPORTANT – Obey local laws. Not all essential oils, botanicals and herbs are legal for use in every Country or State. Check your Local, State, Federal and Importation laws before ordering botanicals. This device is meant for legal use only.
Battery Safety and Warnings (Read before use)
Lithium batteries are volatile. Failure to read and follow these instructions may result in fire, personal injury and damage to property if charged or used improperly.
- Always handle your batteries with care – never drop the batteries or device.
- Fully charge your Air MAX Batteries before first use.
- Only use official Air MAX Batteries and Chargers. Do not use any third-party, counterfeit, or unknown brand batteries or chargers.
- Lithium batteries can explode or cause a fire if they are used incorrectly or if they are defective. Do not tamper with or misuse the Air MAX Batteries and do not use damaged and/or defective batteries.
- Air MAX Batteries are manufactured to strict quality standards, specifically for use with the Air MAX .
- Always match positive (+) and negative (-) when inserting batteries into theAir MAX and the Air MAX Battery Chargers.
- Batteries that are not in use should be stored in a safe, cool, dry place, individually in a plastic holder or container away from all metal objects.
- Do not store your batteries fully charged or fully drained for extended periods of time (one month or longer).
Never throw away the Air MAX Batteries and never put them into a battery collection box. If you have dropped the battery or notice physical damage you should take the following steps:
- 1.Store the battery in a safe, dry place and leave it for at least one hour in case there is a short circuit and the battery starts heating up.
- 2.Check to see if the battery has become hot. If so, leave the battery until it has cooled off, and then dispose according to local laws and regulations.
Counterfeit and Inferior – Quality Battery Warning:
- Customers are urged to be careful when purchasing batteries due to the flood of counterfeit and inferior-quality batteries for sale often found on online-auction and various websites.
- The use of counterfeit or inferior-quality lithium batteries can cause internal shorts leading to fires and explosions which can result in property damage and personal injury.
- The use of counterfeit or inferior-quality batteries could greatly reduce runtime and output performance, damage your Air MAX, constitute a safety hazard, and voids all warranties.
If you experience an issue with your Air MAX send an email to [email protected] and an expert Arizer customer service representative will reply as soon as possible to troubleshoot and determine the best way to resolve any issues. To help expedite your service request please include a description of the problem, your full name, your shipping address, the serial number on the bottom of your device, and a copy of your sales receipt.
The Air MAX itself is essentially maintenance free so you can spend your time using it instead of cleaning it! Simply recharge or replace the battery when it is low, swap out pre-loaded Glass Aroma Tubes on the go without fiddling with emptying or cleaning bowls, and keep your herbs and botanicals contained in the removable Glass Aroma Tubes that can be cleaned effortlessly! After numerous uses the glass parts should be cleaned to ensure optimal performance. To clean the glass parts, soak them in isopropyl (rubbing) alcohol for a couple hours then rinse with hot water. In most cases doing this will clean the Glass Aroma Tubes as good as new, but if not simply repeat as necessary. After cleaning, always ensure the Glass Aroma Tubes are fully dry before use.
Air SE Support
- 1 x Air SE Micro Heater
- 1 x Glass Aroma Tube (70mm)
- 1 x PVC Travel Tube (70mm)
- 1 x Silicone Cap
- 1 x USB Power Cord
- 1 x Stainless Steel Stir Stick
- 1 x Air SE Owner’s Manual
Arizer Batteries meet rigorous quality standards. With normal use they will last for hundreds of charge cycles before losing any capacity. Dropping the battery or the unit can result in battery damage that may limit or reduce the battery capacity quickly, so it is important to handle the batteries and your unit carefully.
Battery Charge
Depending on the temperature setting and general usage patterns the Air SE battery will typically last for 80 minutes of use per charge. The battery will take approximately 3.5 hours to fully charge, or longer if you use it while charging.
Use While Charging
If your battery is running low, with the Air SE you don’t have to wait for the battery to fully charge before you can use it. Just partially charge the battery (15-20 minutes) and then you can set the temperature and use the Air SE while the battery continues charging. Note: The Air SE will not operate if the battery is completely drained.
Battery Conservation
The Air SE and Air SE Chargers have built-in protections to prevent the battery from being overcharged or drained too low. To conserve battery life, use the Air SE in a temperature-controlled environment and use lower temperature settings. When outdoors, stay sheltered from the elements and avoid using in extremely cold temperatures. Charge the battery as necessary. Do not store the battery fully charged or fully drained for longer than one month (store with partial charge).
Battery Replacement
The Air SE Battery is a high-capacity, long life battery, and will last for a long time, even with prolonged / regular use. Spare/replacement Air SE batteries are available for purchase at www.arizer.com
Safety Disclaimer
Arizer Batteries should not be substituted for third-party batteries — Only use official Air SE Batteries with your Air SE. We cannot verify the quality or safety of other batteries, and using third-party batteries can result in personal injury, electric shock, and damage to the device which is not covered under warranty.
The Control Panel consists of the LED Display Icons and a heat and adjustments button with up and down arrows. Push and hold the Centre of the button to turn on the device. Press any button and the unit will begin heating to the previously used temperature. Press the up or down arrow to adjust.
Battery/Heat Icon LED – At startup, the upper LED will blink once for 2 seconds to indicate the Battery Level. The icon will then blink blue when idle, and turn a solid color once a heat setting is chosen.
Power Icon LED – At start up the lower LED remains off until a heat setting is chosen, then blink blue as the unit is heating up, turning a solid blue when the set temperature is reached.
Temperature Settings – The Arizer Air SE’s optimized heating system warms up fast and has five preset temperatures:
Level 1 (Blue) – 180°C / 356°F
Level 2 (White) – 190°C / 374°F
Level 3 (Green) – 200°C / 392°F
Level 4 (Orange) – 205°C / 401°F
Level 5 (Red) – 210°C / 410°F
Audio / Beep – The Audio / Beep function can be turned on and off. To turn the Audio / Beep on or off, first power on the device, then press and hold the Up Arrow button for approximately three seconds.
If the Audio / Beep is activated, a beep will be heard when the Arizer Air is powered on or off. If the Audio / Beep is deactivated, the Arizer Air remains silent when powered on or off.
Automatic Shut-Off Timer – The automatic shut-off timer safety feature ensures you don’t forget to turn off the unit and helps conserve battery life. The default setting is 10-minutes and cannot be adjusted.
Power-On Delay – The power-on delay safety feature ensures you don’t accidentally turn on the unit. Press and hold the center of the button for 2 seconds to turn on or off the device.
A full range of parts and accessories to equip and protect your Air SE are available for purchase here. If you can’t find the part you need send an email to: [email protected] with a description of the part you need.
Note: Metal screens are included and available for your convenience but they make vapor harsh and diminish the flavors. The Air SE Glass Aroma Tubes have a built-in screen to keep vapor pure and flavorful so we recommend using whole or coarsely ground botanicals with no metal screen for smooth and tasty vapor.
The Air SE is ultra-compact, lightweight, and completely portable, conveniently fitting in the palm of your hand, pocket, or purse.
- Weight: 103 grams
- Height: 122mm
- Diameter: 28mm
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
The Air SE carries a lifetime warranty on the heating element, and a limited 1-Year warranty covering defects in materials or workmanship, excluding battery. Glass is not covered under warranty. Retain proof of purchase for warranty service. Warranty is non-transferrable, valid from the original date of purchase and does not extend or renew with service. Returning the product and costs incurred are the responsibility of the user. Arizer will repair or replace warrantied items at our discretion. The warranty does not cover units damaged by dropping, tampering, unauthorized service performed or attempted, modifying the unit, misuse or abuse.
First Time Use
Examine box contents to ensure all included parts are in good condition, not damaged from shipping. Check glass parts for cracks or breakage. Packaging materials, bags, and small parts may pose a choking hazard. Keep out of reach and use from children, minors and pets. Glass Aroma Tubes may fit tightly in the unit at first. If you are finding it difficult to insert a Glass Aroma Tube, turn on the Air SE, set the temperature to 200° C, and let the unit heat for 1-2 minutes then try again. To burn off any residues from manufacturing and packaging, turn on the unit, set the temperature to 220° C, and let the unit heat for 5 – 10 minutes. If new items are received damaged, do not use, and email [email protected] for assistance.
Warning – Hot Parts – Handle hot parts and glass parts with care.
Do not place hot parts on non-heat safe surfaces. Carefully attach protective heat-rated silicone caps to safely cover the hot end of glass parts. Allow the heating unit and hot parts to cool before placing them in a purse, pocket, or any container where damage from hot parts can occur. Not for use with e-liquids, tobacco, or tobacco products. Misuse can result in damage and voids all warranties. Unauthorized service performed voids all warranties. For assistance email [email protected].
Parts are made from strong scientific quality borosilicate glass, but all borosilicate glass is breakable so handle with care and caution. Avoid tapping on hard surfaces to prevent cracking and breaking. If glass is dropped or sustains an impact, examine for cracking, chipping and weakness before use. Do not expose hot glass parts to cold water or extreme temperature change as this may result in cracking and breaking. Safely dispose of damaged glass according to local regulations. Examine parts periodically for cracks, chipping and weakness from handling and drops.
Product contains electrical and delicate parts — do not drop. If dropped or otherwise damaged do not operate. To protect and prevent electric shock and/or fire never immerse or operate the product in or around any water and/or liquids. Do not stick or pour anything in the unit or place near flammable material. Do not store, operate or expose the unit and contents to extreme temperatures. Do not open the unit – doing so may cause electric shock and voids warranty.
Do not leave the unit turned on and left unattended.
The information contained in this manual is an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficacy or use of its preparation. This information is not intended in any way to replace or supersede professional consultations.
The information contained herein is for instructional and cautionary purposes only. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device, use unit only for its intended use.
Safety Certifications
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
Limitation of Liability (Read before use)
Failure to read or follow instructions, improper or careless use may lead to personal injury. Arizer and affiliated companies will not assume any liability for injury or damage resulting from the use or misuse of this device. Due to the fragility and nature of glass Arizer and affiliated companies are not responsible for cuts or injuries sustained from breakage. Arizer and affiliated companies are not liable for injuries or burns associated from touching hot parts. Arizer and affiliated companies are not liable for failures to comply with these warnings and safety guidelines. By purchasing this product the buyer assumes all risks associated with lithium batteries. If you do not agree with these conditions, return the product immediately before use.
This product is intended for use with the botanicals described herein — Arizer and affiliated companies are not liable for use with other than those botanicals described herein. Company’s liabilities for damages in connection with the product and its parts shall not exceed the purchase price of the product.
IMPORTANT
Obey local laws. Not all essential oils, botanicals and herbs are legal for use in every Country or State. Check your Local, State, Federal and Importation laws before ordering botanicals. This device is meant for legal use only.
Battery Safety and Warnings (Read before use)
Lithium batteries are volatile. Failure to read and follow these instructions may result in fire, personal injury and damage to property if charged or used improperly.
- Always handle your batteries with care – never drop the batteries or device.
- Fully charge your Air SE Batteries before first use.
- Only use official Air SE Batteries and Chargers. Do not use any third-party, counterfeit, or unknown brand batteries or chargers.
- Lithium batteries can explode or cause a fire if they are used incorrectly or if they are defective. Do not tamper with or misuse the Air SE Batteries and do not use damaged and/or defective batteries.
- Air SE Batteries are manufactured to strict quality standards, specifically for use with the Air SE .
- Always match positive (+) and negative (-) when inserting batteries into theAir SE and the Air SE Battery Chargers.
- Batteries that are not in use should be stored in a safe, cool, dry place, individually in a plastic holder or container away from all metal objects.
- Do not store your batteries fully charged or fully drained for extended periods of time (one month or longer).
Never throw away the Air SE Batteries and never put them into a battery collection box. If you have dropped the battery or notice physical damage you should take the following steps:
- Store the battery in a safe, dry place and leave it for at least one hour in case there is a short circuit and the battery starts heating up.
- Check to see if the battery has become hot. If so, leave the battery until it has cooled off, and then dispose according to local laws and regulations.
Counterfeit and Inferior – Quality Battery Warning:
- Customers are urged to be careful when purchasing batteries due to the flood of counterfeit and inferior-quality batteries for sale often found on online-auction and various websites.
- The use of counterfeit or inferior-quality lithium batteries can cause internal shorts leading to fires and explosions which can result in property damage and personal injury.
- The use of counterfeit or inferior-quality batteries could greatly reduce runtime and output performance, damage your Air SE, constitute a safety hazard, and voids all warranties.
If you experience an issue with your Air SE, send an email to [email protected] and an expert Arizer customer service representative will reply as soon as possible to troubleshoot and determine the best way to resolve any issues. To help expedite your service request please include a description of the problem, your full name, your shipping address, the serial number on the bottom of your device, and a copy of your sales receipt.
The Air SE itself is essentially maintenance free so you can spend your time using it instead of cleaning it! Simply recharge or replace the battery when it is low, swap out pre-loaded Glass Aroma Tubes on the go without fiddling with emptying or cleaning bowls, and keep your herbs and botanicals contained in the removable Glass Aroma Tubes that can be cleaned effortlessly! After numerous uses the glass parts should be cleaned to ensure optimal performance. To clean the glass parts, soak them in isopropyl (rubbing) alcohol for a couple hours then rinse with hot water. In most cases doing this will clean the Glass Aroma Tubes as good as new, but if not simply repeat as necessary. After cleaning, always ensure the Glass Aroma Tubes are fully dry before use.
Air SE Support
- 1 x Air SE Micro Heater
- 1 x Glass Aroma Tube (70mm)
- 1 x PVC Travel Tube (70mm)
- 1 x Silicone Cap
- 1 x USB Power Cord
- 1 x Stainless Steel Stir Stick
- 1 x Air SE Owner’s Manual
Arizer Batteries meet rigorous quality standards. With normal use they will last for hundreds of charge cycles before losing any capacity. Dropping the battery or the unit can result in battery damage that may limit or reduce the battery capacity quickly, so it is important to handle the batteries and your unit carefully.
Battery Charge
Depending on the temperature setting and general usage patterns the Air SE battery will typically last for 80 minutes of use per charge. The battery will take approximately 3.5 hours to fully charge, or longer if you use it while charging.
Use While Charging
If your battery is running low, with the Air SE you don’t have to wait for the battery to fully charge before you can use it. Just partially charge the battery (15-20 minutes) and then you can set the temperature and use the Air SE while the battery continues charging. Note: The Air SE will not operate if the battery is completely drained.
Battery Conservation
The Air SE and Air SE Chargers have built-in protections to prevent the battery from being overcharged or drained too low. To conserve battery life, use the Air SE in a temperature-controlled environment and use lower temperature settings. When outdoors, stay sheltered from the elements and avoid using in extremely cold temperatures. Charge the battery as necessary. Do not store the battery fully charged or fully drained for longer than one month (store with partial charge).
Battery Replacement
The Air SE Battery is a high-capacity, long life battery, and will last for a long time, even with prolonged / regular use. Spare/replacement Air SE batteries are available for purchase at www.arizer.com
Safety Disclaimer
Arizer Batteries should not be substituted for third-party batteries — Only use official Air SE Batteries with your Air SE. We cannot verify the quality or safety of other batteries, and using third-party batteries can result in personal injury, electric shock, and damage to the device which is not covered under warranty.
The Control Panel consists of the LED Display Icons and a heat and adjustments button with up and down arrows. Push and hold the Centre of the button to turn on the device. Press any button and the unit will begin heating to the previously used temperature. Press the up or down arrow to adjust.
Battery/Heat Icon LED – At startup, the upper LED will blink once for 2 seconds to indicate the Battery Level. The icon will then blink blue when idle, and turn a solid color once a heat setting is chosen.
Power Icon LED – At start up the lower LED remains off until a heat setting is chosen, then blink blue as the unit is heating up, turning a solid blue when the set temperature is reached.
Temperature Settings – The Arizer Air SE’s optimized heating system warms up fast and has five preset temperatures:
Level 1 (Blue) – 180°C / 356°F
Level 2 (White) – 190°C / 374°F
Level 3 (Green) – 200°C / 392°F
Level 4 (Orange) – 205°C / 401°F
Level 5 (Red) – 210°C / 410°F
Audio / Beep – The Audio / Beep function can be turned on and off. To turn the Audio / Beep on or off, first power on the device, then press and hold the Up Arrow button for approximately three seconds.
If the Audio / Beep is activated, a beep will be heard when the Arizer Air is powered on or off. If the Audio / Beep is deactivated, the Arizer Air remains silent when powered on or off.
Automatic Shut-Off Timer – The automatic shut-off timer safety feature ensures you don’t forget to turn off the unit and helps conserve battery life. The default setting is 10-minutes and cannot be adjusted.
Power-On Delay – The power-on delay safety feature ensures you don’t accidentally turn on the unit. Press and hold the center of the button for 2 seconds to turn on or off the device.
A full range of parts and accessories to equip and protect your Air SE are available for purchase here. If you can’t find the part you need send an email to: [email protected] with a description of the part you need.
Note: Metal screens are included and available for your convenience but they make vapor harsh and diminish the flavors. The Air SE Glass Aroma Tubes have a built-in screen to keep vapor pure and flavorful so we recommend using whole or coarsely ground botanicals with no metal screen for smooth and tasty vapor.
- Weight: 103 grams
- Height: 122mm
- Diameter: 28mm
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
First Time Use
Examine box contents to ensure all included parts are in good condition, not damaged from shipping. Check glass parts for cracks or breakage. Packaging materials, bags, and small parts may pose a choking hazard. Keep out of reach and use from children, minors and pets. Glass Aroma Tubes may fit tightly in the unit at first. If you are finding it difficult to insert a Glass Aroma Tube, turn on the Air SE, set the temperature to 200° C, and let the unit heat for 1-2 minutes then try again. To burn off any residues from manufacturing and packaging, turn on the unit, set the temperature to 220° C, and let the unit heat for 5 – 10 minutes. If new items are received damaged, do not use, and email [email protected] for assistance.
Warning – Hot Parts – Handle hot parts and glass parts with care.
Do not place hot parts on non-heat safe surfaces. Carefully attach protective heat-rated silicone caps to safely cover the hot end of glass parts. Allow the heating unit and hot parts to cool before placing them in a purse, pocket, or any container where damage from hot parts can occur. Not for use with e-liquids, tobacco, or tobacco products. Misuse can result in damage and voids all warranties. Unauthorized service performed voids all warranties. For assistance email [email protected].
Parts are made from strong scientific quality borosilicate glass, but all borosilicate glass is breakable so handle with care and caution. Avoid tapping on hard surfaces to prevent cracking and breaking. If glass is dropped or sustains an impact, examine for cracking, chipping and weakness before use. Do not expose hot glass parts to cold water or extreme temperature change as this may result in cracking and breaking. Safely dispose of damaged glass according to local regulations. Examine parts periodically for cracks, chipping and weakness from handling and drops.
Product contains electrical and delicate parts — do not drop. If dropped or otherwise damaged do not operate. To protect and prevent electric shock and/or fire never immerse or operate the product in or around any water and/or liquids. Do not stick or pour anything in the unit or place near flammable material. Do not store, operate or expose the unit and contents to extreme temperatures. Do not open the unit – doing so may cause electric shock and voids warranty.
Do not leave the unit turned on and left unattended.
The information contained in this manual is an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficacy or use of its preparation. This information is not intended in any way to replace or supersede professional consultations.
The information contained herein is for instructional and cautionary purposes only. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device, use unit only for its intended use.
Safety Certifications
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
Limitation of Liability (Read before use)
Failure to read or follow instructions, improper or careless use may lead to personal injury. Arizer and affiliated companies will not assume any liability for injury or damage resulting from the use or misuse of this device. Due to the fragility and nature of glass Arizer and affiliated companies are not responsible for cuts or injuries sustained from breakage. Arizer and affiliated companies are not liable for injuries or burns associated from touching hot parts. Arizer and affiliated companies are not liable for failures to comply with these warnings and safety guidelines. By purchasing this product the buyer assumes all risks associated with lithium batteries. If you do not agree with these conditions, return the product immediately before use.
This product is intended for use with the botanicals described herein — Arizer and affiliated companies are not liable for use with other than those botanicals described herein. Company’s liabilities for damages in connection with the product and its parts shall not exceed the purchase price of the product.
IMPORTANT
Obey local laws. Not all essential oils, botanicals and herbs are legal for use in every Country or State. Check your Local, State, Federal and Importation laws before ordering botanicals. This device is meant for legal use only.
Battery Safety and Warnings (Read before use)
Lithium batteries are volatile. Failure to read and follow these instructions may result in fire, personal injury and damage to property if charged or used improperly.
- Always handle your batteries with care – never drop the batteries or device.
- Fully charge your Air SE Batteries before first use.
- Only use official Air SE Batteries and Chargers. Do not use any third-party, counterfeit, or unknown brand batteries or chargers.
- Lithium batteries can explode or cause a fire if they are used incorrectly or if they are defective. Do not tamper with or misuse the Air SE Batteries and do not use damaged and/or defective batteries.
- Air SE Batteries are manufactured to strict quality standards, specifically for use with the Air SE .
- Always match positive (+) and negative (-) when inserting batteries into theAir SE and the Air SE Battery Chargers.
- Batteries that are not in use should be stored in a safe, cool, dry place, individually in a plastic holder or container away from all metal objects.
- Do not store your batteries fully charged or fully drained for extended periods of time (one month or longer).
Never throw away the Air SE Batteries and never put them into a battery collection box. If you have dropped the battery or notice physical damage you should take the following steps:
- Store the battery in a safe, dry place and leave it for at least one hour in case there is a short circuit and the battery starts heating up.
- Check to see if the battery has become hot. If so, leave the battery until it has cooled off, and then dispose according to local laws and regulations.
Counterfeit and Inferior – Quality Battery Warning:
- Customers are urged to be careful when purchasing batteries due to the flood of counterfeit and inferior-quality batteries for sale often found on online-auction and various websites.
- The use of counterfeit or inferior-quality lithium batteries can cause internal shorts leading to fires and explosions which can result in property damage and personal injury.
- The use of counterfeit or inferior-quality batteries could greatly reduce runtime and output performance, damage your Air SE, constitute a safety hazard, and voids all warranties.
If you experience an issue with your Air SE, send an email to [email protected] and an expert Arizer customer service representative will reply as soon as possible to troubleshoot and determine the best way to resolve any issues. To help expedite your service request please include a description of the problem, your full name, your shipping address, the serial number on the bottom of your device, and a copy of your sales receipt.
Shipping Disclaimer:
Please note that our processing and shipping times are not guaranteed at this time. Rest assured we’re working hard to meet and exceed your expectations. Thank you in advance for your patience and support!
Contact Arizer Support
Contact Us
Service
Toll Free
Leave us a voice message and we'll get back to you ASAP
888-291-0521
Wholesale
Interested in becoming a Retailer or Distributor?
Click Here
Air SE Support
- 1 x Air SE Micro Heater
- 1 x Glass Aroma Tube (70mm)
- 1 x PVC Travel Tube (70mm)
- 1 x Silicone Cap
- 1 x USB Power Cord
- 1 x Stainless Steel Stir Stick
- 1 x Air SE Owner’s Manual
Arizer Batteries meet rigorous quality standards. With normal use they will last for hundreds of charge cycles before losing any capacity. Dropping the battery or the unit can result in battery damage that may limit or reduce the battery capacity quickly, so it is important to handle the batteries and your unit carefully.
Battery Charge
Depending on the temperature setting and general usage patterns the Air SE battery will typically last for 80 minutes of use per charge. The battery will take approximately 3.5 hours to fully charge, or longer if you use it while charging.
Use While Charging
If your battery is running low, with the Air SE you don’t have to wait for the battery to fully charge before you can use it. Just partially charge the battery (15-20 minutes) and then you can set the temperature and use the Air SE while the battery continues charging. Note: The Air SE will not operate if the battery is completely drained.
Battery Conservation
The Air SE and Air SE Chargers have built-in protections to prevent the battery from being overcharged or drained too low. To conserve battery life, use the Air SE in a temperature-controlled environment and use lower temperature settings. When outdoors, stay sheltered from the elements and avoid using in extremely cold temperatures. Charge the battery as necessary. Do not store the battery fully charged or fully drained for longer than one month (store with partial charge).
Battery Replacement
The Air SE Battery is a high-capacity, long life battery, and will last for a long time, even with prolonged / regular use. Spare/replacement Air SE batteries are available for purchase at www.arizer.com
Safety Disclaimer
Arizer Batteries should not be substituted for third-party batteries — Only use official Air SE Batteries with your Air SE. We cannot verify the quality or safety of other batteries, and using third-party batteries can result in personal injury, electric shock, and damage to the device which is not covered under warranty.
The Control Panel consists of the LED Display Icons and a heat and adjustments button with up and down arrows. Push and hold the Centre of the button to turn on the device. Press any button and the unit will begin heating to the previously used temperature. Press the up or down arrow to adjust.
Battery/Heat Icon LED – At startup, the upper LED will blink once for 2 seconds to indicate the Battery Level. The icon will then blink blue when idle, and turn a solid color once a heat setting is chosen.
Power Icon LED – At start up the lower LED remains off until a heat setting is chosen, then blink blue as the unit is heating up, turning a solid blue when the set temperature is reached.
Temperature Settings – The Arizer Air SE’s optimized heating system warms up fast and has five preset temperatures:
Level 1 (Blue) – 180°C / 356°F
Level 2 (White) – 190°C / 374°F
Level 3 (Green) – 200°C / 392°F
Level 4 (Orange) – 205°C / 401°F
Level 5 (Red) – 210°C / 410°F
Audio / Beep – The Audio / Beep function can be turned on and off. To turn the Audio / Beep on or off, first power on the device, then press and hold the Up Arrow button for approximately three seconds.
If the Audio / Beep is activated, a beep will be heard when the Arizer Air is powered on or off. If the Audio / Beep is deactivated, the Arizer Air remains silent when powered on or off.
Automatic Shut-Off Timer – The automatic shut-off timer safety feature ensures you don’t forget to turn off the unit and helps conserve battery life. The default setting is 10-minutes and cannot be adjusted.
Power-On Delay – The power-on delay safety feature ensures you don’t accidentally turn on the unit. Press and hold the center of the button for 2 seconds to turn on or off the device.
A full range of parts and accessories to equip and protect your Air SE are available for purchase here. If you can’t find the part you need send an email to: [email protected] with a description of the part you need.
Note: Metal screens are included and available for your convenience but they make vapor harsh and diminish the flavors. The Air SE Glass Aroma Tubes have a built-in screen to keep vapor pure and flavorful so we recommend using whole or coarsely ground botanicals with no metal screen for smooth and tasty vapor.
The Air SE is ultra-compact, lightweight, and completely portable, conveniently fitting in the palm of your hand, pocket, or purse.
- Weight: 103 grams
- Height: 122mm
- Diameter: 28mm
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
The Air SE carries a lifetime warranty on the heating element, and a limited 1-Year warranty covering defects in materials or workmanship, excluding battery. Glass is not covered under warranty. Retain proof of purchase for warranty service. Warranty is non-transferrable, valid from the original date of purchase and does not extend or renew with service. Returning the product and costs incurred are the responsibility of the user. Arizer will repair or replace warrantied items at our discretion. The warranty does not cover units damaged by dropping, tampering, unauthorized service performed or attempted, modifying the unit, misuse or abuse.
First Time Use
Examine box contents to ensure all included parts are in good condition, not damaged from shipping. Check glass parts for cracks or breakage. Packaging materials, bags, and small parts may pose a choking hazard. Keep out of reach and use from children, minors and pets. Glass Aroma Tubes may fit tightly in the unit at first. If you are finding it difficult to insert a Glass Aroma Tube, turn on the Air SE, set the temperature to 200° C, and let the unit heat for 1-2 minutes then try again. To burn off any residues from manufacturing and packaging, turn on the unit, set the temperature to 220° C, and let the unit heat for 5 – 10 minutes. If new items are received damaged, do not use, and email [email protected] for assistance.
Warning – Hot Parts – Handle hot parts and glass parts with care.
Do not place hot parts on non-heat safe surfaces. Carefully attach protective heat-rated silicone caps to safely cover the hot end of glass parts. Allow the heating unit and hot parts to cool before placing them in a purse, pocket, or any container where damage from hot parts can occur. Not for use with e-liquids, tobacco, or tobacco products. Misuse can result in damage and voids all warranties. Unauthorized service performed voids all warranties. For assistance email [email protected].
Parts are made from strong scientific quality borosilicate glass, but all borosilicate glass is breakable so handle with care and caution. Avoid tapping on hard surfaces to prevent cracking and breaking. If glass is dropped or sustains an impact, examine for cracking, chipping and weakness before use. Do not expose hot glass parts to cold water or extreme temperature change as this may result in cracking and breaking. Safely dispose of damaged glass according to local regulations. Examine parts periodically for cracks, chipping and weakness from handling and drops.
Product contains electrical and delicate parts — do not drop. If dropped or otherwise damaged do not operate. To protect and prevent electric shock and/or fire never immerse or operate the product in or around any water and/or liquids. Do not stick or pour anything in the unit or place near flammable material. Do not store, operate or expose the unit and contents to extreme temperatures. Do not open the unit – doing so may cause electric shock and voids warranty.
Do not leave the unit turned on and left unattended.
The information contained in this manual is an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficacy or use of its preparation. This information is not intended in any way to replace or supersede professional consultations.
The information contained herein is for instructional and cautionary purposes only. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device, use unit only for its intended use.
Safety Certifications
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
Limitation of Liability (Read before use)
Failure to read or follow instructions, improper or careless use may lead to personal injury. Arizer and affiliated companies will not assume any liability for injury or damage resulting from the use or misuse of this device. Due to the fragility and nature of glass Arizer and affiliated companies are not responsible for cuts or injuries sustained from breakage. Arizer and affiliated companies are not liable for injuries or burns associated from touching hot parts. Arizer and affiliated companies are not liable for failures to comply with these warnings and safety guidelines. By purchasing this product the buyer assumes all risks associated with lithium batteries. If you do not agree with these conditions, return the product immediately before use.
This product is intended for use with the botanicals described herein — Arizer and affiliated companies are not liable for use with other than those botanicals described herein. Company’s liabilities for damages in connection with the product and its parts shall not exceed the purchase price of the product.
IMPORTANT
Obey local laws. Not all essential oils, botanicals and herbs are legal for use in every Country or State. Check your Local, State, Federal and Importation laws before ordering botanicals. This device is meant for legal use only.
Battery Safety and Warnings (Read before use)
Lithium batteries are volatile. Failure to read and follow these instructions may result in fire, personal injury and damage to property if charged or used improperly.
- Always handle your batteries with care – never drop the batteries or device.
- Fully charge your Air SE Batteries before first use.
- Only use official Air SE Batteries and Chargers. Do not use any third-party, counterfeit, or unknown brand batteries or chargers.
- Lithium batteries can explode or cause a fire if they are used incorrectly or if they are defective. Do not tamper with or misuse the Air SE Batteries and do not use damaged and/or defective batteries.
- Air SE Batteries are manufactured to strict quality standards, specifically for use with the Air SE .
- Always match positive (+) and negative (-) when inserting batteries into theAir SE and the Air SE Battery Chargers.
- Batteries that are not in use should be stored in a safe, cool, dry place, individually in a plastic holder or container away from all metal objects.
- Do not store your batteries fully charged or fully drained for extended periods of time (one month or longer).
Never throw away the Air SE Batteries and never put them into a battery collection box. If you have dropped the battery or notice physical damage you should take the following steps:
- Store the battery in a safe, dry place and leave it for at least one hour in case there is a short circuit and the battery starts heating up.
- Check to see if the battery has become hot. If so, leave the battery until it has cooled off, and then dispose according to local laws and regulations.
Counterfeit and Inferior – Quality Battery Warning:
- Customers are urged to be careful when purchasing batteries due to the flood of counterfeit and inferior-quality batteries for sale often found on online-auction and various websites.
- The use of counterfeit or inferior-quality lithium batteries can cause internal shorts leading to fires and explosions which can result in property damage and personal injury.
- The use of counterfeit or inferior-quality batteries could greatly reduce runtime and output performance, damage your Air SE, constitute a safety hazard, and voids all warranties.
If you experience an issue with your Air SE, send an email to [email protected] and an expert Arizer customer service representative will reply as soon as possible to troubleshoot and determine the best way to resolve any issues. To help expedite your service request please include a description of the problem, your full name, your shipping address, the serial number on the bottom of your device, and a copy of your sales receipt.
The Air SE itself is essentially maintenance free so you can spend your time using it instead of cleaning it! Simply recharge or replace the battery when it is low, swap out pre-loaded Glass Aroma Tubes on the go without fiddling with emptying or cleaning bowls, and keep your herbs and botanicals contained in the removable Glass Aroma Tubes that can be cleaned effortlessly! After numerous uses the glass parts should be cleaned to ensure optimal performance. To clean the glass parts, soak them in isopropyl (rubbing) alcohol for a couple hours then rinse with hot water. In most cases doing this will clean the Glass Aroma Tubes as good as new, but if not simply repeat as necessary. After cleaning, always ensure the Glass Aroma Tubes are fully dry before use.
Air SE Support
- 1 x Air SE Micro Heater
- 1 x Glass Aroma Tube (70mm)
- 1 x PVC Travel Tube (70mm)
- 1 x Silicone Cap
- 1 x USB Power Cord
- 1 x Stainless Steel Stir Stick
- 1 x Air SE Owner’s Manual
Arizer Batteries meet rigorous quality standards. With normal use they will last for hundreds of charge cycles before losing any capacity. Dropping the battery or the unit can result in battery damage that may limit or reduce the battery capacity quickly, so it is important to handle the batteries and your unit carefully.
Battery Charge
Depending on the temperature setting and general usage patterns the Air SE battery will typically last for 80 minutes of use per charge. The battery will take approximately 3.5 hours to fully charge, or longer if you use it while charging.
Use While Charging
If your battery is running low, with the Air SE you don’t have to wait for the battery to fully charge before you can use it. Just partially charge the battery (15-20 minutes) and then you can set the temperature and use the Air SE while the battery continues charging. Note: The Air SE will not operate if the battery is completely drained.
Battery Conservation
The Air SE and Air SE Chargers have built-in protections to prevent the battery from being overcharged or drained too low. To conserve battery life, use the Air SE in a temperature-controlled environment and use lower temperature settings. When outdoors, stay sheltered from the elements and avoid using in extremely cold temperatures. Charge the battery as necessary. Do not store the battery fully charged or fully drained for longer than one month (store with partial charge).
Battery Replacement
The Air SE Battery is a high-capacity, long life battery, and will last for a long time, even with prolonged / regular use. Spare/replacement Air SE batteries are available for purchase at www.arizer.com
Safety Disclaimer
Arizer Batteries should not be substituted for third-party batteries — Only use official Air SE Batteries with your Air SE. We cannot verify the quality or safety of other batteries, and using third-party batteries can result in personal injury, electric shock, and damage to the device which is not covered under warranty.
The Control Panel consists of the LED Display Icons and a heat and adjustments button with up and down arrows. Push and hold the Centre of the button to turn on the device. Press any button and the unit will begin heating to the previously used temperature. Press the up or down arrow to adjust.
Battery/Heat Icon LED – At startup, the upper LED will blink once for 2 seconds to indicate the Battery Level. The icon will then blink blue when idle, and turn a solid color once a heat setting is chosen.
Power Icon LED – At start up the lower LED remains off until a heat setting is chosen, then blink blue as the unit is heating up, turning a solid blue when the set temperature is reached.
Temperature Settings – The Arizer Air SE’s optimized heating system warms up fast and has five preset temperatures:
Level 1 (Blue) – 180°C / 356°F
Level 2 (White) – 190°C / 374°F
Level 3 (Green) – 200°C / 392°F
Level 4 (Orange) – 205°C / 401°F
Level 5 (Red) – 210°C / 410°F
Audio / Beep – The Audio / Beep function can be turned on and off. To turn the Audio / Beep on or off, first power on the device, then press and hold the Up Arrow button for approximately three seconds.
If the Audio / Beep is activated, a beep will be heard when the Arizer Air is powered on or off. If the Audio / Beep is deactivated, the Arizer Air remains silent when powered on or off.
Automatic Shut-Off Timer – The automatic shut-off timer safety feature ensures you don’t forget to turn off the unit and helps conserve battery life. The default setting is 10-minutes and cannot be adjusted.
Power-On Delay – The power-on delay safety feature ensures you don’t accidentally turn on the unit. Press and hold the center of the button for 2 seconds to turn on or off the device.
A full range of parts and accessories to equip and protect your Air SE are available for purchase here. If you can’t find the part you need send an email to: [email protected] with a description of the part you need.
Note: Metal screens are included and available for your convenience but they make vapor harsh and diminish the flavors. The Air SE Glass Aroma Tubes have a built-in screen to keep vapor pure and flavorful so we recommend using whole or coarsely ground botanicals with no metal screen for smooth and tasty vapor.
The Air SE is ultra-compact, lightweight, and completely portable, conveniently fitting in the palm of your hand, pocket, or purse.
- Weight: 103 grams
- Height: 122mm
- Diameter: 28mm
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
The Air SE carries a lifetime warranty on the heating element, and a limited 1-Year warranty covering defects in materials or workmanship, excluding battery. Glass is not covered under warranty. Retain proof of purchase for warranty service. Warranty is non-transferrable, valid from the original date of purchase and does not extend or renew with service. Returning the product and costs incurred are the responsibility of the user. Arizer will repair or replace warrantied items at our discretion. The warranty does not cover units damaged by dropping, tampering, unauthorized service performed or attempted, modifying the unit, misuse or abuse.
First Time Use
Examine box contents to ensure all included parts are in good condition, not damaged from shipping. Check glass parts for cracks or breakage. Packaging materials, bags, and small parts may pose a choking hazard. Keep out of reach and use from children, minors and pets. Glass Aroma Tubes may fit tightly in the unit at first. If you are finding it difficult to insert a Glass Aroma Tube, turn on the Air SE, set the temperature to 200° C, and let the unit heat for 1-2 minutes then try again. To burn off any residues from manufacturing and packaging, turn on the unit, set the temperature to 220° C, and let the unit heat for 5 – 10 minutes. If new items are received damaged, do not use, and email [email protected] for assistance.
Warning – Hot Parts – Handle hot parts and glass parts with care.
Do not place hot parts on non-heat safe surfaces. Carefully attach protective heat-rated silicone caps to safely cover the hot end of glass parts. Allow the heating unit and hot parts to cool before placing them in a purse, pocket, or any container where damage from hot parts can occur. Not for use with e-liquids, tobacco, or tobacco products. Misuse can result in damage and voids all warranties. Unauthorized service performed voids all warranties. For assistance email [email protected].
Parts are made from strong scientific quality borosilicate glass, but all borosilicate glass is breakable so handle with care and caution. Avoid tapping on hard surfaces to prevent cracking and breaking. If glass is dropped or sustains an impact, examine for cracking, chipping and weakness before use. Do not expose hot glass parts to cold water or extreme temperature change as this may result in cracking and breaking. Safely dispose of damaged glass according to local regulations. Examine parts periodically for cracks, chipping and weakness from handling and drops.
Product contains electrical and delicate parts — do not drop. If dropped or otherwise damaged do not operate. To protect and prevent electric shock and/or fire never immerse or operate the product in or around any water and/or liquids. Do not stick or pour anything in the unit or place near flammable material. Do not store, operate or expose the unit and contents to extreme temperatures. Do not open the unit – doing so may cause electric shock and voids warranty.
Do not leave the unit turned on and left unattended.
The information contained in this manual is an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficacy or use of its preparation. This information is not intended in any way to replace or supersede professional consultations.
The information contained herein is for instructional and cautionary purposes only. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device, use unit only for its intended use.
Safety Certifications
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
Limitation of Liability (Read before use)
Failure to read or follow instructions, improper or careless use may lead to personal injury. Arizer and affiliated companies will not assume any liability for injury or damage resulting from the use or misuse of this device. Due to the fragility and nature of glass Arizer and affiliated companies are not responsible for cuts or injuries sustained from breakage. Arizer and affiliated companies are not liable for injuries or burns associated from touching hot parts. Arizer and affiliated companies are not liable for failures to comply with these warnings and safety guidelines. By purchasing this product the buyer assumes all risks associated with lithium batteries. If you do not agree with these conditions, return the product immediately before use.
This product is intended for use with the botanicals described herein — Arizer and affiliated companies are not liable for use with other than those botanicals described herein. Company’s liabilities for damages in connection with the product and its parts shall not exceed the purchase price of the product.
IMPORTANT
Obey local laws. Not all essential oils, botanicals and herbs are legal for use in every Country or State. Check your Local, State, Federal and Importation laws before ordering botanicals. This device is meant for legal use only.
Battery Safety and Warnings (Read before use)
Lithium batteries are volatile. Failure to read and follow these instructions may result in fire, personal injury and damage to property if charged or used improperly.
- Always handle your batteries with care – never drop the batteries or device.
- Fully charge your Air SE Batteries before first use.
- Only use official Air SE Batteries and Chargers. Do not use any third-party, counterfeit, or unknown brand batteries or chargers.
- Lithium batteries can explode or cause a fire if they are used incorrectly or if they are defective. Do not tamper with or misuse the Air SE Batteries and do not use damaged and/or defective batteries.
- Air SE Batteries are manufactured to strict quality standards, specifically for use with the Air SE .
- Always match positive (+) and negative (-) when inserting batteries into theAir SE and the Air SE Battery Chargers.
- Batteries that are not in use should be stored in a safe, cool, dry place, individually in a plastic holder or container away from all metal objects.
- Do not store your batteries fully charged or fully drained for extended periods of time (one month or longer).
Never throw away the Air SE Batteries and never put them into a battery collection box. If you have dropped the battery or notice physical damage you should take the following steps:
- Store the battery in a safe, dry place and leave it for at least one hour in case there is a short circuit and the battery starts heating up.
- Check to see if the battery has become hot. If so, leave the battery until it has cooled off, and then dispose according to local laws and regulations.
Counterfeit and Inferior – Quality Battery Warning:
- Customers are urged to be careful when purchasing batteries due to the flood of counterfeit and inferior-quality batteries for sale often found on online-auction and various websites.
- The use of counterfeit or inferior-quality lithium batteries can cause internal shorts leading to fires and explosions which can result in property damage and personal injury.
- The use of counterfeit or inferior-quality batteries could greatly reduce runtime and output performance, damage your Air SE, constitute a safety hazard, and voids all warranties.
If you experience an issue with your Air SE, send an email to [email protected] and an expert Arizer customer service representative will reply as soon as possible to troubleshoot and determine the best way to resolve any issues. To help expedite your service request please include a description of the problem, your full name, your shipping address, the serial number on the bottom of your device, and a copy of your sales receipt.
The Air SE itself is essentially maintenance free so you can spend your time using it instead of cleaning it! Simply recharge or replace the battery when it is low, swap out pre-loaded Glass Aroma Tubes on the go without fiddling with emptying or cleaning bowls, and keep your herbs and botanicals contained in the removable Glass Aroma Tubes that can be cleaned effortlessly! After numerous uses the glass parts should be cleaned to ensure optimal performance. To clean the glass parts, soak them in isopropyl (rubbing) alcohol for a couple hours then rinse with hot water. In most cases doing this will clean the Glass Aroma Tubes as good as new, but if not simply repeat as necessary. After cleaning, always ensure the Glass Aroma Tubes are fully dry before use.
Air SE Support
- 1 x Air SE Micro Heater
- 1 x Glass Aroma Tube (70mm)
- 1 x PVC Travel Tube (70mm)
- 1 x Silicone Cap
- 1 x USB Power Cord
- 1 x Stainless Steel Stir Stick
- 1 x Air SE Owner’s Manual
Arizer Batteries meet rigorous quality standards. With normal use they will last for hundreds of charge cycles before losing any capacity. Dropping the battery or the unit can result in battery damage that may limit or reduce the battery capacity quickly, so it is important to handle the batteries and your unit carefully.
Battery Charge
Depending on the temperature setting and general usage patterns the Air SE battery will typically last for 80 minutes of use per charge. The battery will take approximately 3.5 hours to fully charge, or longer if you use it while charging.
Use While Charging
If your battery is running low, with the Air SE you don’t have to wait for the battery to fully charge before you can use it. Just partially charge the battery (15-20 minutes) and then you can set the temperature and use the Air SE while the battery continues charging. Note: The Air SE will not operate if the battery is completely drained.
Battery Conservation
The Air SE and Air SE Chargers have built-in protections to prevent the battery from being overcharged or drained too low. To conserve battery life, use the Air SE in a temperature-controlled environment and use lower temperature settings. When outdoors, stay sheltered from the elements and avoid using in extremely cold temperatures. Charge the battery as necessary. Do not store the battery fully charged or fully drained for longer than one month (store with partial charge).
Battery Replacement
The Air SE Battery is a high-capacity, long life battery, and will last for a long time, even with prolonged / regular use. Spare/replacement Air SE batteries are available for purchase at www.arizer.com
Safety Disclaimer
Arizer Batteries should not be substituted for third-party batteries — Only use official Air SE Batteries with your Air SE. We cannot verify the quality or safety of other batteries, and using third-party batteries can result in personal injury, electric shock, and damage to the device which is not covered under warranty.
The Control Panel consists of the LED Display Icons and a heat and adjustments button with up and down arrows. Push and hold the Centre of the button to turn on the device. Press any button and the unit will begin heating to the previously used temperature. Press the up or down arrow to adjust.
Battery/Heat Icon LED – At startup, the upper LED will blink once for 2 seconds to indicate the Battery Level. The icon will then blink blue when idle, and turn a solid color once a heat setting is chosen.
Power Icon LED – At start up the lower LED remains off until a heat setting is chosen, then blink blue as the unit is heating up, turning a solid blue when the set temperature is reached.
Temperature Settings – The Arizer Air SE’s optimized heating system warms up fast and has five preset temperatures:
Level 1 (Blue) – 180°C / 356°F
Level 2 (White) – 190°C / 374°F
Level 3 (Green) – 200°C / 392°F
Level 4 (Orange) – 205°C / 401°F
Level 5 (Red) – 210°C / 410°F
Audio / Beep – The Audio / Beep function can be turned on and off. To turn the Audio / Beep on or off, first power on the device, then press and hold the Up Arrow button for approximately three seconds.
If the Audio / Beep is activated, a beep will be heard when the Arizer Air is powered on or off. If the Audio / Beep is deactivated, the Arizer Air remains silent when powered on or off.
Automatic Shut-Off Timer – The automatic shut-off timer safety feature ensures you don’t forget to turn off the unit and helps conserve battery life. The default setting is 10-minutes and cannot be adjusted.
Power-On Delay – The power-on delay safety feature ensures you don’t accidentally turn on the unit. Press and hold the center of the button for 2 seconds to turn on or off the device.
A full range of parts and accessories to equip and protect your Air SE are available for purchase here. If you can’t find the part you need send an email to: [email protected] with a description of the part you need.
Note: Metal screens are included and available for your convenience but they make vapor harsh and diminish the flavors. The Air SE Glass Aroma Tubes have a built-in screen to keep vapor pure and flavorful so we recommend using whole or coarsely ground botanicals with no metal screen for smooth and tasty vapor.
The Air SE is ultra-compact, lightweight, and completely portable, conveniently fitting in the palm of your hand, pocket, or purse.
- Weight: 103 grams
- Height: 122mm
- Diameter: 28mm
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
The Air SE carries a lifetime warranty on the heating element, and a limited 1-Year warranty covering defects in materials or workmanship, excluding battery. Glass is not covered under warranty. Retain proof of purchase for warranty service. Warranty is non-transferrable, valid from the original date of purchase and does not extend or renew with service. Returning the product and costs incurred are the responsibility of the user. Arizer will repair or replace warrantied items at our discretion. The warranty does not cover units damaged by dropping, tampering, unauthorized service performed or attempted, modifying the unit, misuse or abuse.
First Time Use
Examine box contents to ensure all included parts are in good condition, not damaged from shipping. Check glass parts for cracks or breakage. Packaging materials, bags, and small parts may pose a choking hazard. Keep out of reach and use from children, minors and pets. Glass Aroma Tubes may fit tightly in the unit at first. If you are finding it difficult to insert a Glass Aroma Tube, turn on the Air SE, set the temperature to 200° C, and let the unit heat for 1-2 minutes then try again. To burn off any residues from manufacturing and packaging, turn on the unit, set the temperature to 220° C, and let the unit heat for 5 – 10 minutes. If new items are received damaged, do not use, and email [email protected] for assistance.
Warning – Hot Parts – Handle hot parts and glass parts with care.
Do not place hot parts on non-heat safe surfaces. Carefully attach protective heat-rated silicone caps to safely cover the hot end of glass parts. Allow the heating unit and hot parts to cool before placing them in a purse, pocket, or any container where damage from hot parts can occur. Not for use with e-liquids, tobacco, or tobacco products. Misuse can result in damage and voids all warranties. Unauthorized service performed voids all warranties. For assistance email [email protected].
Parts are made from strong scientific quality borosilicate glass, but all borosilicate glass is breakable so handle with care and caution. Avoid tapping on hard surfaces to prevent cracking and breaking. If glass is dropped or sustains an impact, examine for cracking, chipping and weakness before use. Do not expose hot glass parts to cold water or extreme temperature change as this may result in cracking and breaking. Safely dispose of damaged glass according to local regulations. Examine parts periodically for cracks, chipping and weakness from handling and drops.
Product contains electrical and delicate parts — do not drop. If dropped or otherwise damaged do not operate. To protect and prevent electric shock and/or fire never immerse or operate the product in or around any water and/or liquids. Do not stick or pour anything in the unit or place near flammable material. Do not store, operate or expose the unit and contents to extreme temperatures. Do not open the unit – doing so may cause electric shock and voids warranty.
Do not leave the unit turned on and left unattended.
The information contained in this manual is an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficacy or use of its preparation. This information is not intended in any way to replace or supersede professional consultations.
The information contained herein is for instructional and cautionary purposes only. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device, use unit only for its intended use.
Safety Certifications
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
Limitation of Liability (Read before use)
Failure to read or follow instructions, improper or careless use may lead to personal injury. Arizer and affiliated companies will not assume any liability for injury or damage resulting from the use or misuse of this device. Due to the fragility and nature of glass Arizer and affiliated companies are not responsible for cuts or injuries sustained from breakage. Arizer and affiliated companies are not liable for injuries or burns associated from touching hot parts. Arizer and affiliated companies are not liable for failures to comply with these warnings and safety guidelines. By purchasing this product the buyer assumes all risks associated with lithium batteries. If you do not agree with these conditions, return the product immediately before use.
This product is intended for use with the botanicals described herein — Arizer and affiliated companies are not liable for use with other than those botanicals described herein. Company’s liabilities for damages in connection with the product and its parts shall not exceed the purchase price of the product.
IMPORTANT
Obey local laws. Not all essential oils, botanicals and herbs are legal for use in every Country or State. Check your Local, State, Federal and Importation laws before ordering botanicals. This device is meant for legal use only.
Battery Safety and Warnings (Read before use)
Lithium batteries are volatile. Failure to read and follow these instructions may result in fire, personal injury and damage to property if charged or used improperly.
- Always handle your batteries with care – never drop the batteries or device.
- Fully charge your Air SE Batteries before first use.
- Only use official Air SE Batteries and Chargers. Do not use any third-party, counterfeit, or unknown brand batteries or chargers.
- Lithium batteries can explode or cause a fire if they are used incorrectly or if they are defective. Do not tamper with or misuse the Air SE Batteries and do not use damaged and/or defective batteries.
- Air SE Batteries are manufactured to strict quality standards, specifically for use with the Air SE .
- Always match positive (+) and negative (-) when inserting batteries into theAir SE and the Air SE Battery Chargers.
- Batteries that are not in use should be stored in a safe, cool, dry place, individually in a plastic holder or container away from all metal objects.
- Do not store your batteries fully charged or fully drained for extended periods of time (one month or longer).
Never throw away the Air SE Batteries and never put them into a battery collection box. If you have dropped the battery or notice physical damage you should take the following steps:
- Store the battery in a safe, dry place and leave it for at least one hour in case there is a short circuit and the battery starts heating up.
- Check to see if the battery has become hot. If so, leave the battery until it has cooled off, and then dispose according to local laws and regulations.
Counterfeit and Inferior – Quality Battery Warning:
- Customers are urged to be careful when purchasing batteries due to the flood of counterfeit and inferior-quality batteries for sale often found on online-auction and various websites.
- The use of counterfeit or inferior-quality lithium batteries can cause internal shorts leading to fires and explosions which can result in property damage and personal injury.
- The use of counterfeit or inferior-quality batteries could greatly reduce runtime and output performance, damage your Air SE, constitute a safety hazard, and voids all warranties.
If you experience an issue with your Air SE, send an email to [email protected] and an expert Arizer customer service representative will reply as soon as possible to troubleshoot and determine the best way to resolve any issues. To help expedite your service request please include a description of the problem, your full name, your shipping address, the serial number on the bottom of your device, and a copy of your sales receipt.
The Air SE itself is essentially maintenance free so you can spend your time using it instead of cleaning it! Simply recharge or replace the battery when it is low, swap out pre-loaded Glass Aroma Tubes on the go without fiddling with emptying or cleaning bowls, and keep your herbs and botanicals contained in the removable Glass Aroma Tubes that can be cleaned effortlessly! After numerous uses the glass parts should be cleaned to ensure optimal performance. To clean the glass parts, soak them in isopropyl (rubbing) alcohol for a couple hours then rinse with hot water. In most cases doing this will clean the Glass Aroma Tubes as good as new, but if not simply repeat as necessary. After cleaning, always ensure the Glass Aroma Tubes are fully dry before use.
Solo II MAX Support
All the topics and information you need for the Solo II MAX.
- 1 x Solo II MAX Portable Micro-Heater
- 1 x Solo II MAX USB-C Charger (5v, 3A)
- 1 x Air / Solo Glass Aroma Tube (110mm)
- 1 x Air / Solo Frosted Glass Aroma Tube (14mm)
- 2 x Air / Solo Silicone Stem Caps
- 1 x Air / Solo PVC Travel Tube w./ Cap (110mm Size)
- 1 x Air / Solo PVC Travel Tube w./ Cap (70mm Size)
- 1 x Air / Solo Stainless Steel Stirring Tool
- 4 x Air / Solo Stainless Steel Filter Screens
- 1 x Solo II MAX Owner’s Manual
The Control Panel consists of the OLED and three buttons: the Menu (M) button, and the Up & Down Arrow buttons.
Powering ON/OFF
To power on your Solo II MAX simply press and hold the Menu (M) button along with the UP button until you see the greetings screen.
The Solo II MAX has two display modes:
Normal Mode – Use Normal Mode for full display and complete Custom Session Settings.
Dark Mode – Use Dark Mode for discrete, low-light display and customizable dark settings.
Normal Mode Settings
Press the Menu (M) button to access settings and navigate the list. Use UP and Down buttons to change the selected setting.
Temperature Settings – The Solo II MAX’s optimized heating system warms up in under 30 seconds and has a wide temperature range of 50°C–220°C (122°F–428°F). The temperature is adjustable in 1° (Press Up or Down) increments and 10° increments (Hold Up or Down).
Audio / Beep – This function has three volume settings and can also be turned off. If the Audio / Beep is activated, a beep will be heard when the Solo II MAX is powered on or off.
Temperature Alert – This function has three volume settings and can also be turned off. If the Temperature Alert is activated, two beeps will be heard when the set temperature is reached.
Automatic Shut-Off Timer – The automatic shut-off timer safety feature ensures you don’t forget to turn off the unit and helps conserve battery life. The shut-off timer can be adjusted between 5–15 minutes in 1 minute increments.
Celsius or Fahrenheit – The Solo II MAX display can be set to Celsius or Fahrenheit.
Display Brightness – The unit’s display has three brightness settings: low, medium, and high.
Power-On Delay – The power-on delay safety feature ensures you don’t accidentally turn on the unit and has four settings for your convenience: 2 Seconds, 4 Seconds, 6 Seconds, and 8 Seconds.
Dark Mode Settings
Press the Menu (M) button to access settings and navigate the list. Use UP and Down buttons to change the selected setting.
Temperature Settings – The temperature is adjustable in 1° (Press Up or Down) increments and 10° increments (Hold Up or Down).
Audio / Beep – This function has two options (Low and Off). Default setting is Off. Temperature Alert – This function has two options (Low and Off). Default setting is Off.
Automatic Shut-Off Timer – This function can be adjusted between 5 – 15 minutes in one-minute increments. The default setting is 10-minutes.
Celsius or Fahrenheit – This feature cannot be changed in Dark Mode.
Display Brightness – In Dark Mode, screen brightness is always low. This setting is not displayed in the menu and cannot be adjusted.
Power-On Delay – This safety feature has four settings: 2, Seconds, 4 Seconds, 6 Seconds, and 8 Seconds. The default setting is 4 seconds.
ENHANCE YOUR EXPERIENCE
Connect to your water pipe or bubbler using the included Frosted Glass Aroma Tube.
DISPLAY AND CONTROL INVERSION
When the Solo II MAX is rotated 180° the display and controls will invert. This allows for intuitive interaction with your vaporizer while accompanied with a bubbler or other peripheral accessory.
Press and hold the Menu (M) and Down Arrow buttons to start up the Solo II MAX in Dark Mode. The top right corner symbol (circle) flashes once for each countdown second. The text “Dark Mode” is displayed for 1 second, followed by the top left corner symbol (square) flashing once per second indicating the heater is idle. Press either the Up or Down buttons to start heating your Solo II MAX to previously used Dark Mode temperature. Press the Menu (M) button to adjust temperature, press or hold either Up or Down to change temperature. The bottom left corner symbol (plus sign) flashes once per second while heating and the bottom right corner symbol (triangle) flashes once every 5 seconds when the set temperature is reached.To switch between Dark Mode and Normal Mode simply press and hold the Menu (M) button and Down Arrow for 2 seconds.
Important: Dark Mode settings are independent and stored separately from Normal Mode settings.
A full range of parts and accessories to equip and protect your Solo II MAX are available for purchase here. If you can’t find the part you need send an email to: [email protected] with a description of the part you need.
The Solo II MAX is ulta-compact, lightweight, and completely portable, conveniently fitting in the palm of your hand, pocket, or purse.
Weight: 210 grams
Length: 46 mm
Width: 35 mm
Height: 113 mm
Cautions, Disclaimers & Warnings(Read before use)
First Time Use – Examine box contents to ensure all included parts are in good condition, not damaged from shipping. Check glass parts for cracks or breakage. Packaging materials, bags, & small parts may pose a choking hazard. Keep out of reach/use from children, minors and
pets. Glass Aroma Tubes may fit tightly in the unit at first. If you are finding it difficult to insert a Glass Aroma Tube, turn on the Solo II MAX, set the temperature to 200° C, and let the unit heat for 1-2 minutes then try again. To burn off any residues from packaging, turn on the unit, set the temperature to 220° C, and let the unit heat for 5 – 10 minutes.
Warning – Hot Parts – Handle hot parts and glass parts with care. Do not place hot parts on non-heat safe surfaces. Carefully attach protective heat-rated silicone caps to safely cover the hot end of glass parts. Allow the heating unit and hot parts to cool before placing them in purse, pocket, or any container where damage from hot parts can occur. Parts are made from strong scientific quality borosilicate glass, but all borosilicate glass is breakable so handle with care and caution. Avoid tapping on hard surfaces to prevent cracking and breaking. If glass is dropped or sustains an impact, examine for cracking, chipping and weakness before use. Do not expose hot glass parts to cold water or extreme temperature change as this may result in cracking/breaking. Product contains electrical and delicate parts — do not drop. If damaged do not operate. To protect/prevent against electric shock/fire, never immerse or operate the product in or around any water/liquids. Do not stick or pour anything in the unit or place near flammable material. Do notstore/operate/expose the unit and contents to extreme temperatures. Do not open the unit – doing so may cause electric shock and voids warranty. Do not leave the unit turned on and left unattended. The information contained in this manual is an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficacy or use of its preparation. This information is not intended in any way to replace or supersede professional consultations. The information contained herein is for instructional and cautionary purposes only. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device, use unit only for its intended use.
Safety Certifications
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
Limitation of Liability (Read before use)
Failure to read or follow instructions, improper or careless use may lead to personal injury. Arizer and affiliated companies will not assume any liability for injury or damage resulting from the use or misuse of this device. Due to the fragility and nature of glass Arizer and affiliated companies are not responsible for cuts or injuries sustained from breakage. Arizer and affiliated companies are not liable for injuries or burns associated from touching hot parts. Arizer and affiliated companies are not liable for failures to comply with these warnings and safety guidelines. By purchasing this product the buyer assumes all risks associated with lithium batteries. If you do not agree with these conditions, return the product immediately before use. This product is intended for use with the botanicals described herein — Arizer and affiliated companies are not liable for use with other than those botanicals described herein. Company’s liabilities for damages in connection with the product and its parts shall not exceed the purchase price of the product. IMPORTANT Obey local laws. Not all essential oils, botanicals and herbs
are legal for use in every Country or State. Check your Local, State, Federal and Importation laws before ordering botanicals.This device is meant for legal use only.
If you experience an issue with your Solo II MAX send an email to [email protected] and an expert Arizer customer service representative will reply as soon as possible to troubleshoot and determine the best way to resolve any issues. To help expedite your service request please include a description of the problem, your full name, your shipping address, the serial number on the bottom of your device, and a copy of your sales receipt.
The Solo II MAX itself is essentially maintenance free so you can spend your time using it instead of cleaning it! Simply recharge or replace the battery when it is low, swap out pre-loaded Glass Aroma Tubes on the go without fiddling with emptying or cleaning bowls, and keep your herbs and botanicals contained in the removable Glass Aroma Tubes that can be cleaned effortlessly! After numerous uses the glass parts should be cleaned to ensure optimal performance. To clean the glass parts, soak them in isopropyl (rubbing) alcohol for a couple hours then rinse with hot water. In most cases doing this will clean the Glass Aroma Tubes as good as new, but if not simply repeat as necessary. After cleaning, always ensure the Glass Aroma Tubes are fully dry before use.
Policies
The Arizer Privacy Policy
Updated May 16, 2016
Your privacy is important to Arizer. This Privacy Policy covers how we collect, use, disclose and store your information.
Collection and Use of Personal Information
Anytime you are in contact with us you may be asked to provide your personal information for use consistent with this Privacy Policy. When you create an account, purchase a product, or contact us, we may collect a variety of information, including your name, mailing address, phone number, email address, contact preferences, and credit card information.
You are not required to provide the personal information that we have requested, but if you do not, in some cases we will be unable to provide you with our products or service, or respond to your inquiries.
We use personal information to help us create, develop, operate, deliver, and improve our products, customer service, website, content and advertising. We may also use your personal information to verify identity, to determine appropriate services, and for loss prevention and anti-fraud purposes.
With your consent, the personal information we collect allows us to share information with you about Arizer’s latest product announcements, sales, and promotions. If you don’t want to be on our mailing list, you can opt out anytime by updating your account information.
Cookies and Other Technologies
To make your experience more convenient and to serve you better, Arizer uses cookies and other technologies to remember personal information when you use our website. Cookies can be disabled on any browser or device, but please note that certain features of the Arizer website will not be available once cookies are disabled.
Arizer’s email messages and advertisements may use “cookies” and other technologies such as pixel tags and web beacons. Information collected by cookies and other technologies is considered non‑personal information. To the extent that Internet Protocol (IP) addresses or similar identifiers are considered personal information by local law, we treat these identifiers as personal information. To the extent that non-personal information is combined with personal information, we treat the combined information as personal information.
We also gather some information automatically and store it in log files. This information includes Internet Protocol (IP) addresses, browser type and language, Internet service provider (ISP), referring and exit websites and applications, operating system, date/time stamp, and clickstream data.
We use this information to understand and analyze trends and demographic information, for website administration, to improve our products and customer service, and in our marketing and advertising.
In some of our email messages, we use a “click-through URL” linked to content on the Arizerwebsite. When customers click one of these URLs, they pass through a separate web server before arriving at the destination page on our website. We track this click-through data to help us determine interest in particular topics and measure the effectiveness of our customer communications. If you prefer not to be tracked in this way, you should not click any links in the email messages.
Pixel tags enable us to send email messages in a format customers can read, and they tell us whether mail has been opened. We may use this information to reduce or eliminate messages sent to customers.
Third-Party Sites and Services
Arizer shares personal information with companies who provide services such as fulfilling customer orders, delivering products to you, providing customer service, or marketing to customers. In general, the third-party providers used by us will only collect, use and disclose your information to the extent necessary to allow them to perform the services they provide to us.
Certain third-party service providers, such as payment gateways and other payment transaction processors, have their own privacy policies in respect to the information we are required to provide to them for your purchase-related transactions. The Arizer website may contain links to third-party websites, products, and services. Information collected by third parties is governed by their privacy practices.
In particular, remember that certain providers may be located in or have facilities that are located a different jurisdiction than either you or us. If you elect to proceed with a transaction that involves the services of a third-party service provider, then your information may become subject to the laws of the jurisdiction(s) in which that service provider or its facilities are located.
Other
By law, legal process, litigation, or requests from authorities within or outside your country of residence it may be necessary for Arizer to disclose your personal information. We may also disclose information about you if we determine that for purposes of national security, law enforcement, or other issues of public importance, disclosure is necessary or appropriate.
We may also disclose information about you if we determine that disclosure is reasonably necessary to enforce our terms and conditions or protect our operations. In the event of an organization, merger, or sale we may transfer any and all personal information we collect to the relevant third party.
Protection, Integrity and Retention of Personal Information
Arizer takes the security of your personal information seriously. To protect your personal information, we take reasonable precautions and follow industry best practices to make sure it is not inappropriately lost, misused, accessed, disclosed, altered or destroyed.
If you provide us with your credit card information, the information is encrypted using secure socket layer technology (SSL) and stored with a AES-256 encryption. We follow all PCI-DSS requirements and implement additional generally accepted industry standards.
Arizer makes it easy for you to keep your personal information accurate, complete, and up to date. We will retain your personal information for the period necessary to fulfill the purposes outlined in this Privacy Policy unless a longer retention period is required or permitted by law.
Access to Personal Information
You can help ensure that your contact information and preferences are accurate, complete, and up to date by signing in to your account and updating your information. For other personal information we hold, we will provide you with access for any purpose including to request that we correct the data if it is inaccurate or delete the data if Arizer is not required to retain it by law or for legitimate business purposes. We may decline to process requests that are frivolous, vexatious, jeopardize the privacy of others, are extremely impractical, or for which access is not otherwise required by local law.
Privacy Questions
If you have any questions or concerns about Arizer’s Privacy Policy or if you would like to make a complaint about a possible breach of local privacy laws, please contact us. Access, correction, or deletion requests can be made by contacting us at [email protected]
Updates
Arizer may update its Privacy Policy from time to time. When we change the policy in amaterial way, a notice will be posted on our website along with the updated Privacy Policy.
Arizer Website Terms of Use
Legal Information & Notices
OVERVIEW
This website is operated by Arizer. Throughout the site, the terms “we”, “us” and “our” refer to Arizer. Arizer offers this website, including all information, tools and services available from this site to you, the user, conditioned upon your acceptance of all terms, conditions, policies and notices stated here.
By visiting our site and/ or purchasing something from us, you engage in our “Service” and agree to be bound by the following terms and conditions (“Terms of Service”, “Terms”), including those additional terms and conditions and policies referenced herein and/or available by hyperlink. These Terms of Service apply to all users of the site, including without limitation users who are browsers, vendors, customers, merchants, and/ or contributors of content.
Please read these Terms of Service carefully before accessing or using our website. By accessing or using any part of the site, you agree to be bound by these Terms of Service. If you do not agree to all the terms and conditions of this agreement, then you may not access the website or use any services. If these Terms of Service are considered an offer, acceptance is expressly limited to these Terms of Service.
Any new features or tools which are added to the current store shall also be subject to the Terms of Service. You can review the most current version of the Terms of Service at any time on this page. We reserve the right to update, change or replace any part of these Terms of Service by posting updates and/or changes to our website. It is your responsibility to check this page periodically for changes. Your continued use of or access to the website following the posting of any changes constitutes acceptance of those changes.
ONLINE STORE TERMS
By agreeing to these Terms of Service, you represent that you are at least the age of majority in your state or province of residence, or that you are the age of majority in your state or province of residence and you have given us your consent to allow any of your minor dependents to use this site.
You may not use our products for any illegal or unauthorized purpose nor may you, in the use of the Service, violate any laws in your jurisdiction. You must not transmit any worms or viruses or any code of a destructive nature.
A breach or violation of any of the Terms will result in an immediate termination of your Service.
GENERAL CONDITIONS
We reserve the right to refuse service to anyone for any reason at any time.
You understand that your content (not including credit card information), may be transferred unencrypted and involve (a) transmissions over various networks; and (b) changes to conform and adapt to technical requirements of connecting networks or devices. Credit card information is always encrypted during transfer over networks.
You agree not to reproduce, duplicate, copy, sell, resell or exploit any portion of the Service, use of the Service, or access to the Service or any contact on the website through which the service is provided, without express written permission by us.
The headings used in this agreement are included for convenience only and will not limit or otherwise affect these Terms.
ACCURACY, COMPLETENESS AND TIMELINESS OF INFORMATION
We are not responsible if information made available on this site is not accurate, complete or current. The material on this site is provided for general information only and should not be relied upon or used as the sole basis for making decisions. Any reliance on the material on this site is at your own risk.
This site may contain certain historical information. Historical information, necessarily, is not current and is provided for your reference only. We reserve the right to modify the contents of this site at any time, but we have no obligation to update any information on our site. You agree that it is your responsibility to monitor changes to our site.
MODIFICATIONS TO THE SERVICE AND PRICES
Prices for our products are subject to change without notice.
We reserve the right at any time to modify or discontinue the Service (or any part or content thereof) without notice at any time.
We shall not be liable to you or to any third-party for any modification, price change, suspension or discontinuance of the Service.
PRODUCTS OR SERVICES
Certain products or services may be available exclusively online through the website. These products or services may have limited quantities and are subject to return or exchange only according to our Return Policy.
We have made every effort to display as accurately as possible the colors and images of our products that appear at the store. We cannot guarantee that your computer monitor’s display of any color will be accurate.
We reserve the right, but are not obligated, to limit the sales of our products or Services to any person, geographic region or jurisdiction. We may exercise this right on a case-by-case basis. We reserve the right to limit the quantities of any products or services that we offer. All descriptions of products or product pricing are subject to change at anytime without notice, at the sole discretion of us. We reserve the right to discontinue any product at any time. Any offer for any product or service made on this site is void where prohibited.
ACCURACY OF BILLING AND ACCOUNT INFORMATION
We reserve the right to refuse any order you place with us. We may, in our sole discretion, limit or cancel quantities purchased per person, per household or per order. These restrictions may include orders placed by or under the same customer account, the same credit card, and/or orders that use the same billing and/or shipping address. In the event that we make a change to or cancel an order, we may attempt to notify you by contacting the e-mail and/or billing address/phone number provided at the time the order was made.
You agree to provide current, complete and accurate purchase and account information for all purchases made at our store. You agree to promptly update your account and other information, including your email address and credit card numbers and expiration dates, so that we can complete your transactions and contact you as needed.
For more detail, please review our Returns Policy.
OPTIONAL TOOLS
We may provide you with access to third-party tools over which we neither monitor nor have any control nor input.
You acknowledge and agree that we provide access to such tools ”as is” and “as available” without any warranties, representations or conditions of any kind and without any endorsement. We shall have no liability whatsoever arising from or relating to your use of optional third-party tools.
Any use by you of optional tools offered through the site is entirely at your own risk and discretion and you should ensure that you are familiar with and approve of the terms on which tools are provided by the relevant third-party provider(s).
We may also, in the future, offer new services and/or features through the website (including, the release of new tools and resources). Such new features and/or services shall also be subject to these Terms of Service.
THIRD-PARTY LINKS
Certain content, products and services available via our Service may include materials from third-parties.
Third-party links on this site may direct you to third-party websites that are not affiliated with us. We are not responsible for examining or evaluating the content or accuracy and we do not warrant and will not have any liability or responsibility for any third-party materials or websites, or for any other materials, products, or services of third-parties.
We are not liable for any harm or damages related to the purchase or use of goods, services, resources, content, or any other transactions made in connection with any third-party websites. Please review carefully the third-party’s policies and practices and make sure you understand them before you engage in any transaction. Complaints, claims, concerns, or questions regarding third-party products should be directed to the third-party.
FEEDBACK AND OTHER SUBMISSIONS
If, at our request, you send certain specific submissions or without a request from us you send creative ideas, suggestions, proposals, plans, or other materials, whether online, by email, by postal mail, or otherwise (collectively, ‘comments’), you agree that we may, at any time, without restriction, edit, copy, publish, distribute, translate and otherwise use in any medium any comments that you forward to us. We are and shall be under no obligation (1) to maintain any comments in confidence; (2) to pay compensation for any comments; or (3) to respond to any comments.
PRIVACY
Arizer’s Privacy Policy applies to use of this Site, and its terms are made a part of these Terms of Use by this reference. To view Arizer’s Privacy Policy, click here. Additionally, by using the Site, you acknowledge and agree that Internet transmissions are never completely private or secure. You understand that any message or information you send to the Site may be read or intercepted by others, even if there is a special notice that a particular transmission (for example, credit card information) is encrypted.
ERRORS, INACCURACIES AND OMISSIONS
Occasionally there may be information on our site or in the Service that contains typographical errors, inaccuracies or omissions that may relate to product descriptions, pricing, promotions, offers, product shipping charges, transit times and availability. We reserve the right to correct any errors, inaccuracies or omissions, and to change or update information or cancel orders if any information in the Service or on any related website is inaccurate at any time without prior notice (including after you have submitted your order).
We undertake no obligation to update, amend or clarify information in the Service or on any related website, including without limitation, pricing information, except as required by law. No specified update or refresh date applied in the Service or on any related website, should be taken to indicate that all information in the Service or on any related website has been modified or updated.
PROHIBITED USES
In addition to other prohibitions as set forth in the Terms of Service, you are prohibited from using the site or its content: (a) for any unlawful purpose; (b) to solicit others to perform or participate in any unlawful acts; (c) to violate any international, federal, provincial or state regulations, rules, laws, or local ordinances; (d) to infringe upon or violate our intellectual property rights or the intellectual property rights of others; (e) to harass, abuse, insult, harm, defame, slander, disparage, intimidate, or discriminate based on gender, sexual orientation, religion, ethnicity, race, age, national origin, or disability; (f) to submit false or misleading information; (g) to upload or transmit viruses or any other type of malicious code that will or may be used in any way that will affect the functionality or operation of the Service or of any related website, other websites, or the Internet; (h) to collect or track the personal information of others; (i) to spam, phish, pharm, pretext, spider, crawl, or scrape; (j) for any obscene or immoral purpose; or (k) to interfere with or circumvent the security features of the Service or any related website, other websites, or the Internet. We reserve the right to terminate your use of the Service or any related website for violating any of the prohibited uses.
DISCLAIMER OF WARRANTIES; LIMITATION OF LIABILITY
We do not guarantee, represent or warrant that your use of our service will be uninterrupted, timely, secure or error-free.
We do not warrant that the results that may be obtained from the use of the service will be accurate or reliable.
You agree that from time to time we may remove the service for indefinite periods of time or cancel the service at any time, without notice to you.
You expressly agree that your use of, or inability to use, the service is at your sole risk. The service and all products and services delivered to you through the service are (except as expressly stated by us) provided ‘as is’ and ‘as available’ for your use, without any representation, warranties or conditions of any kind, either express or implied, including all implied warranties or conditions of merchantability, merchantable quality, fitness for a particular purpose, durability, title, and non-infringement.
In no case shall Arizer, our directors, officers, employees, affiliates, agents, contractors, interns, suppliers, service providers or licensors be liable for any injury, loss, claim, or any direct, indirect, incidental, punitive, special, or consequential damages of any kind, including, without limitation lost profits, lost revenue, lost savings, loss of data, replacement costs, or any similar damages, whether based in contract, tort (including negligence), strict liability or otherwise, arising from your use of any of the service or any products procured using the service, or for any other claim related in any way to your use of the service or any product, including, but not limited to, any errors or omissions in any content, or any loss or damage of any kind incurred as a result of the use of the service or any content (or product) posted, transmitted, or otherwise made available via the service, even if advised of their possibility. Because some states or jurisdictions do not allow the exclusion or the limitation of liability for consequential or incidental damages, in such states or jurisdictions, our liability shall be limited to the maximum extent permitted by law.
INDEMNIFICATION
You agree to indemnify, defend and hold harmless Arizer and our parent, subsidiaries, affiliates, partners, officers, directors, agents, contractors, licensors, service providers, subcontractors, suppliers, interns and employees, harmless from any claim or demand, including reasonable attorneys’ fees, made by any third-party due to or arising out of your breach of these Terms of Service or the documents they incorporate by reference, or your violation of any law or the rights of a third-party.
SEVERABILITY
In the event that any provision of these Terms of Service is determined to be unlawful, void or unenforceable, such provision shall nonetheless be enforceable to the fullest extent permitted by applicable law, and the unenforceable portion shall be deemed to be severed from these Terms of Service, such determination shall not affect the validity and enforceability of any other remaining provisions.
TERMINATION
The obligations and liabilities of the parties incurred prior to the termination date shall survive the termination of this agreement for all purposes.
These Terms of Service are effective unless and until terminated by either you or us. You may terminate these Terms of Service at any time by notifying us that you no longer wish to use our Services, or when you cease using our site.
If in our sole judgment you fail, or we suspect that you have failed, to comply with any term or provision of these Terms of Service, we also may terminate this agreement at any time without notice and you will remain liable for all amounts due up to and including the date of termination; and/or accordingly may deny you access to our Services (or any part thereof).
ENTIRE AGREEMENT
The failure of us to exercise or enforce any right or provision of these Terms of Service shall not constitute a waiver of such right or provision.
These Terms of Service and any policies or operating rules posted by us on this site or in respect to The Service constitutes the entire agreement and understanding between you and us and govern your use of the Service, superseding any prior or contemporaneous agreements, communications and proposals, whether oral or written, between you and us (including, but not limited to, any prior versions of the Terms of Service).
Any ambiguities in the interpretation of these Terms of Service shall not be construed against the drafting party.
PRODUCT REVIEWS
We value your contributions to our site and encourage you to leave reviews about our products! Product reviews should be about Arizer products only. Please ensure your reviews are relevant, honest and appropriate.
Feedback about Arizer the company, your shipment, customer service experience, or packaging can be emailed to: [email protected]
If you submit a review on our site you agree that we may publish your review, together with your name, on this website on such page and in such position as we may determine at our sole discretion.
You further agree that we may edit the review and publish edited or partial versions of the review. We will never edit a review in such a way as to create a misleading impression of your views. Arizer reserves the right to remove any content we deem inappropriate.
GOVERNING LAW
These Terms of Service and any separate agreements whereby we provide you Services shall be governed by and construed in accordance with the laws of Waterloo, Ontario, Canada.
CHANGES TO TERMS OF SERVICE
You can review the most current version of the Terms of Service at any time at this page.
We reserve the right, at our sole discretion, to update, change or replace any part of these Terms of Service by posting updates and changes to our website. It is your responsibility to check our website periodically for changes. Your continued use of or access to our website or the Service following the posting of any changes to these Terms of Service constitutes acceptance of those changes.
CONTACT INFORMATION
Questions about the Terms of Service should be sent to us at [email protected].
SALES & REFUND TERMS AND CONDITIONS
Arizer Sales and Refund Policy
Thank you for shopping at Arizer.net. By placing an order on our website you agree to the terms set forth below along with Arizer’s Privacy Policy and Terms of Use.
Standard Return Policy
We believe you’ll be very happy with your new purchase! Arizer products are designed to be highly efficient and incredibly easy to use, manufactured to the highest standards with the highest quality components, and backed by a solid manufacturer’s warranty & industry-leading customer service.
However, we understand that you may change your mind or that circumstances can change unexpectedly, so we are happy to accept returns of new / unused parts and products that were ordered directly from Arizer.net, for up to one (1) month from the date of purchase.
When we receive an authorized return we will confirm the order contents are new / unused and then we will issue a refund (less shipping & handling costs) based upon the original payment method.
Prior to returning any orders you must Contact Us for instructions. Please provide your order number along with the details of your request.
In addition, please note that we do not accept returns or issue refunds for the following:
-Used parts and products
-Batteries (new or used)
-Damaged / defective products
-Parts and products that were not ordered directly from Arizer.com
If you experience an issue with one of our products we will gladly assist you with troubleshooting and arrange warranty service as necessary. For troubleshooting assistance send us an email to [email protected] and provide us with a description of the problem, your full name, your shipping address, the serial number on the bottom of your device, and a copy of your sales receipt.
Pricing and Price Reductions/Corrections
Arizer reserves the right to change prices for products displayed the Arizer website at any time, and to correct pricing errors that may inadvertently occur. For Canadian customers, prices shown are in Canadian dollars. For international and U.S. customers, prices shown are in U.S. dollars. If you are paying for your order with an international Visa, MasterCard, or American Express, or JCB credit card, please note that the purchase price may fluctuate with exchange rates. In addition, your bank or credit card issuer may also charge you foreign conversion charges and fees, which may also increase the overall cost of your purchase. Please contact your bank or credit card issuer regarding these fees.
Order Acceptance/Confirmation
Arizer may, in its sole discretion, refuse or cancel any order and limit order quantity. Arizer may also require additional qualifying information prior to accepting or processing any order. Once we receive your online order we’ll send you an email order confirmation. Your receipt of an order confirmation does not signify Arizer’s acceptance of your order, nor does it constitute confirmation of our offer to sell; we are simply confirming that we received your order. Arizer reserves the right at any time after receiving your order to accept or decline your order for any reason. If Arizer cancels an order after you have already been billed, Arizer will refund the billed amount.
The Arizer website sells and ships products to end-user customers only, and we reserve the right to refuse or cancel your order if we suspect you are purchasing products for resale.
Shipping & Delivery
You can review the Shipping Policy page to learn about how and when you will receive the products you purchased from the Arizer website. Since the actual delivery of your order can be impacted by events beyond Arizer’s control once it leaves our warehouse, Arizer cannot be held liable for late deliveries but we will work with you to ensure a smooth delivery.
Please note that glass parts are not covered under warranty, but if you place an order on the Arizer website and receive it containing broken glass parts, please send us an email to: [email protected], provide us with your order number and a digital photograph of the broken part(s) you received, and we will work with you to resolve any issues.
Exchanges / Upgrades
We do not offer product exchanges or upgrades, but if you have ordered something from Arizer.net in error that is new / unused, you can return it for a refund and then you can place a new order for what you need.
Product Availability and Limitations
At times we may have to limit the number of products available for purchase. Arizer reserves the right to change or limit quantities available for purchase at any time.
Authorized Retailers
Our products are sold by hundreds of retailers worldwide and the list of retailers is constantly changing, so we do not publish an active list of Authorized Retailers. If you have any questions about a specific retailer please send us an email to: [email protected], and provide us with a link to the retailer(s) you are considering.
Wholesale Purchases / Quantity Discounts
We offer wholesale pricing to established and newly registered businesses alike. Please contact us with details by sending us an email to: [email protected].
Shipping Policy
Processing, Packaging, & Carrier Information
We process, pack, and ship all orders promptly within 1-2 business days. For your convenience and privacy, orders are packed discreetly in a plain brown box or padded envelope. All orders are shipped from Ontario Canada by UPS.
Rates & Delivery
On our Secure Checkout page you’ll see your shopping cart summary, shipping options, and payment options. The shipping cost is calculated and displayed on the Checkout page before you complete your order. Delivery standards listed are estimates (not guaranteed) and are based on when an order is shipped, not when an order is placed. Please note that weekends and Holidays are not considered business days
- UPS Priority – $60.00
- Processing: 2-4 business days
- Shipping: 2-5 business days
- Tracking Included
- Signature Required
Note: Import duties / Customs fees are not included in the product price or shipping & handling cost. Import duties / Customs fees may be collected upon delivery from the carriers for certain packages. These charges are recipient’s responsibility as we are only charging the transportation fee for the packages. You may check with your country’s customs office to determine what these additional costs will be.
Order Tracking
You will receive a shipping notification email from Arizer when your order has been shipped. UPS Tracking numbers may take up to 24 hours to display tracking details. Once you receive the shipping notification email you can review your order, download your invoice, and find the tracking (if applicable) in the “My Account” section of your customer account by clicking “My Account” on our shop.
Missed or Late Delivery
If your selected shipping option states “Signature Required” and you are not home when delivery is attempted a notice will be left in your mailbox or on your door. All contact information and/or instructions for retrieving the shipment can be found on the notice card. If your selected shipping option does not state “Signature Required” and you are not home when delivery is attempted the package will be left in your mailbox or at your door.
Since the actual delivery of your order can be impacted by events beyond Arizer’s control once it leaves our warehouse, Arizer cannot be held liable for late deliveries but we will work with you to ensure a smooth delivery. The delivery of orders is the responsibility of the shipping company not Arizer, but if the estimated delivery time has passed, send us an email to: [email protected] and provide your order number along with the details of your request so we may assist you.
Shipping Disclaimer:
Please note: Due to the COVID-19 pandemic we are taking extra precautions for the safety of our staff, our customers, and our communities. Our processing and shipping times are not guaranteed during this time but rest assured we’re still working hard to meet and exceed your expectations. Thank you in advance for your patience and support!Contact Arizer Support
Contact Us
Service
Toll Free
Leave us a voice message and we'll get back to you ASAP
888-291-0521
Wholesale
Interested in becoming a Retailer or Distributor?
Click Here
Arizer V-Tower Support
- 1 x V-Tower Multi-Purpose Heater
- 1 x V-Tower Power Adapter
- 1 x V-Tower Glass Cyclone Bowl
- 1 x V-Tower Glass Aromatherapy Dish
- 1 x Glass Stirring Tool
- 1 x V-Tower 3′ Whip (Silicone)
- 1 x Spare V-Tower Flat Screen
- 1 x Spare V-Tower Dome Screen
- 1 x V-Tower Owner’s Manual
The Control Panel consists of the LCD and four buttons – the Power button, the Menu button, and the Up & Down Arrow button. Use the Menu button to select the different settings and the Arrow buttons to adjust them.
The V-Tower display can be set to Celsius or Fahrenheit, and has a wide temperature range of 50° C – 260° C (122° F – 500° F). The temperature is adjustable in 1-degree Celsius increments with the Control Panel buttons on the unit.
Press the Up or Down Arrow buttons on the control panel to increase or decrease the temperature.
Note: The outside of the device does not get hot — it is high grade, dual-wall, stainless steel that stays cool to the touch. The glass parts will get hot, so they should be left to cool before handling and must be handled carefully.
A full range of parts and accessories to equip your V-Tower are available for purchase here.
If you can’t find the part you need send us an email to: [email protected] with a description of the part you need.
Note: In case of accidental damage the internal glass part (the Glass Heater Cover) comes with step-by-step repair instructions and is available for purchase on the V-Tower Accessories page.
Small, sturdy, and lightweight. Sized to fit conveniently on any counter, desk, or table.
- Weight (no parts):428 grams
- Height (no parts):170 mm
- Base Diameter:165 mm
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
The V-Tower carries a lifetime warranty on the heating element and a limited 3-Year warranty covering defects in materials or workmanship. Glass is not covered under warranty. Retain proof of purchase for warranty service. Returning the product and costs incurred are the responsibility of the user. Arizer will repair or replace warrantied items at our discretion. The warranty does not cover units damaged by dropping, tampering, unauthorized service performed or attempted, modifying the unit, misuse or abuse.
Cautions, Disclaimers and Warnings (Read Before Use)
Cautions, Disclaimers & Warnings (Read before use)
First Time Use – Examine box contents to ensure all included parts are in good condition, not damaged from shipping. Check glass parts for cracks or breakage. Packaging materials, bags, & small parts may pose a choking hazard. Keep out of reach/use from children, minors, and pets. To burn off any residues from packaging, turn on the unit, set the temperature to 220° C, and let the unit heat for 5 – 10 minutes.
Warning – Hot Parts – Handle hot parts and glass parts with care. Allow heating unit and hot parts to cool before handling, storing, or placing on any surface where damage from hot parts can occur.
Parts are made from strong scientific quality borosilicate glass, but all borosilicate glass is breakable so handle with care and caution. Avoid tapping on hard surfaces to prevent cracking and breaking. If glass is dropped or sustains an impact, examine for cracking, chipping and weakness before use. Do not expose hot glass parts to cold water or extreme temperature change as this may result in cracking/breaking.
Product contains electrical and delicate parts — do not drop. If damaged do not operate. To protect/prevent against electric shock/fire never immerse or operate the product in or around any water/liquids. Do not stick or pour anything in the unit or place near flammable material. Do not store/operate/expose the unit and contents to extreme temperatures. Do not open the unit – doing so may cause electric shock and unauthorized service may void the warranty.
Do not yank or twist the cord to unplug. To disconnect, turn the unit off and remove/unplug the cord by gripping the plug body and pulling it from the outlet.
Do not let the cord hang over the edge of tables/counters or touch hot surfaces. The unit should be situated safely so the cord cannot be pulled on or tripped over. If an extension cord is needed make sure to use a grounded three prong power cord (grounding-type 3-wire cord).
Do not leave the unit turned on and left unattended.
Cautions, Disclaimers & Warnings (Continued)
The information contained in this manual is an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficacy or use of its preparation. This information is not intended in any way to replace or supersede professional consultations.
The information contained herein is for instructional and cautionary purposes only. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition, or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device, use unit only for its intended use.
Safety Certifications
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
Limitation of Liability (Read before use)
Failure to read or follow instructions, improper or careless use may lead to personal injury. Arizer and affiliated companies will not assume any liability for injury or damage resulting from the use or misuse of this device. Due to the fragility and nature of glass Arizer and affiliated companies are not responsible for cuts or injuries sustained from breakage. Arizer and affiliated companies are not liable for injuries or burns associated from touching hot parts. Arizer and affiliated companies are not liable for failures to comply with these warnings and safety guidelines. If you do not agree with these conditions return the product immediately before use.
This product is intended for use with the botanicals described herein — Arizer and affiliated companies are not liable for use with other than those botanicals described herein. Company’s liabilities for damages in connection with the product and its parts shall not exceed the purchase price of the product.
IMPORTANT – Obey local laws. Not all essential oils, botanicals and herbs are legal for use in every Country or State. Check your Local, State, Federal and Importation laws before ordering botanicals. This device is meant for legal use only.
If you experience an issue with your V-Tower send an email to [email protected] and an expert Arizer customer service representative will reply as soon as possible to troubleshoot and determine the best way to resolve any issues. To help expedite your service request please include a description of the problem, your full name, your shipping address, the serial number on the bottom of your device, and a copy of your sales receipt.
Arizer Go Support
All the topics and information you need for the Arizer Go.
- 1 x Arizer Go Portable Micro-Heater
- 1 x Go Battery
- 1 x Go USB Charger / Power Adapter
- 2 x Go Glass Aroma Tube
- 2 x Go PVC Travel Tube w./ Cap
- 1 x Go Belt-Clip Carry Case
- 2 x Go Silicone Stem Caps
- 1 x Stainless Steel Stirring Tool
- 4 x Go Stainless Steel Filter Screens
- 1 x Arizer Go Owners Manual
Arizer Batteries meet rigorous quality standards. With normal use they will last for hundreds of charge cycles before losing any capacity. Dropping the battery or the unit can result in battery damage that may limit / reduce the battery capacity quickly, so it is important to handle the batteries and your unit carefully.
Battery Charge
Depending on the temperature setting and general usage patterns the Arizer Go battery will typically last for 1.5 hours of use per charge. The battery will take 3.5 hours to fully charge, or longer if you use it while charging.
Use While Charging
If your battery is running low, with the Arizer Go you don’t have to wait for the battery to fully charge before you can use it. Just partially charge the battery (15-20 minutes) and then you can set the temperature and use the Arizer Go while the battery continues charging. Note: The Arizer Go will not operate if the battery is completely drained.
Interchangeable / Swappable Battery
An easily interchangeable battery allows you to have some spare batteries fully charged as a back-up for when your battery is running low and for extended use on the go.
Battery Conservation
The Arizer Go and Arizer Go Chargers have built-in protections to prevent the battery from being overcharged or drained too low. To conserve battery life, use the Arizer Go in a temperature controlled environment and use the lower temperature settings. When outdoors, stay sheltered from the elements and avoid using in extremely cold temperatures. Charge the battery as necessary. Do not store the battery fully charged or fully drained for longer than one month (store with partial charge).
Safety Disclaimer
Arizer Batteries should not be substituted for third-party batteries — Only use official Arizer Go Batteries with your Arizer Go. We cannot verify the quality or safety of other batteries, and using third-party batteries can result in personal injury, electric shock, and damage to the device which is not covered under warranty.
The Control Panel consists of the OLED and three buttons: the Menu button and the plus (+) & minus (-) buttons. Use the Menu button to navigate through the different settings and the plus & minus buttons to adjust them.
Temperature Settings
The Arizer Go’s optimized heating system warms up fast and has a wide temperature range of 50°C-220° C (122°F- 428° F). The temperature is adjustable in 1-degree increments and 10-degree increments.
Audio / Beep
The Audio / Beep function has three volume settings and can be turned on and off. If the Audio / Beep is activated, a beep will be heard when the Arizer Go is powered on or off. If the Audio / Beep is deactivated, the Arizer Go remains silent when powered on or off.
Temperature Alert
This function has three volume settings and can also be turned off. If the Temperature Alert is activated two beeps will be heard when the set temperature is reached.
Power-On Delay
The power-on delay safety feature ensures you don’t accidentally turn on the unit and has four settings for your convenience: 2 seconds, 4 Seconds, 6 Seconds, and 8 Seconds. The default setting is 6 seconds.
Automatic Shut-Off Timer
The automatic shut-off timer safety feature ensures you don’t forget to turn off the unit and helps conserve battery life. The shut-off timer can be adjusted between 5–15 minutes in one-minute increments. The default setting is 10-minutes.
Celsius or Fahrenheit
The Arizer Go display can be set to Celsius or Fahrenheit. The default setting is Celsius.
Display Brightness
The Arizer Go’s display has three brightness settings: low, medium, and high. The default setting is medium.
A full range of parts and accessories to equip and protect your Air II are available for purchase here.
If you can’t find the part you need send us an email to: [email protected] with a description of the part you need.
The Arizer Go is ultra-compact, lightweight, and completely portable, conveniently fitting in the palm of your hand, pocket, or purse.
- Weight: 97 grams
- Length: 52 mm
- Width: 24 mm
- Height: 83 mm/ 93 mm
Equipped for worldwide use with an input capacityof 110-240V and international safety certifications.
The Arizer Go carries a lifetime warranty on the heating element, and a limited 2-Year warranty covering defects in materials or workmanship, excluding battery. Glass is not covered under warranty. Retain proof of purchase for warranty service. Returning the product and costs incurred are the responsibility of the user. Arizer will repair or replace warrantied items at our discretion. The warranty does not cover units damaged by dropping, tampering, unauthorized service performed or attempted, modifying the unit,misuse or abuse.
Cautions, Disclaimers and Warnings (Read Before Use)
First Time Use – Examine box contents to ensure all included parts are in good condition, not damaged from shipping. Check glass parts for cracks or breakage. Packaging materials, bags, & small parts may pose a choking hazard. Keep out of reach/use from children, minors, and pets. Glass Aroma Tubes may fit tightly in the unit at first. If you are finding it difficult to insert a Glass Aroma Tube, turn on the Arizer Go, set the temperature to 200° C, and let the unit heat for 1-2 minutes then try again. To burn off any residues from packaging, turn on the unit, set the temperature to 220° C, and let the unit heat for 5 – 10 minutes.
Warning – Hot Parts – Handle hot parts and glass parts with care. Do not place hot parts on non-heat safe surfaces. Carefully attach protective heat-rated silicone caps to safely cover hot end of glass parts. Allow heating unit and hot parts to cool before placing in purse, pocket, or any container where damage from hot parts can occur.
Parts are made from strong scientific quality borosilicate glass, but all borosilicate glass is breakable so handle with care and caution. Avoid tapping on hard surfaces to prevent cracking and breaking. If glass is dropped or sustains an impact, examine for cracking, chipping and weakness before use. Do not expose hot glass parts to cold water or extreme temperature change as this may result in cracking/breaking.
Product contains electrical and delicate parts — do not drop. If damaged do not operate. To protect/prevent against electric shock/fire never immerse or operate the product in or around any water/liquids. Do not stick or pour anything in the unit or place near flammable material. Do not store/operate/expose the unit and contents to extreme temperatures. Do not open the unit – doing so may cause electric shock and voids warranty.
Do not leave the unit turned on and left unattended.
The information contained in this manual is an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficacy or use of its preparation. This information is not intended in any way to replace or supersede professional consultations.
The information contained herein is for instructional and cautionary purposes only. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition, or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device, use unit only for its intended use.
Safety Certifications
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
Limitation of Liability (Read before use)
Failure to read or follow instructions, improper or careless use may lead to personal injury. Arizer and affiliated companies will not assume any liability for injury or damage resulting from the use or misuse of this device. Due to the fragility and nature of glass Arizer and affiliated companies are not responsible for cuts or injuries sustained from breakage. Arizer and affiliated companies are not liable for injuries or burns associated from touching hot parts. Arizer and affiliated companies are not liable for failures to comply with these warnings and safety guidelines. By purchasing this product, the buyer assumes all risks associated with lithium batteries. If you do not agree with these conditions return the product immediately before use.
This product is intended for use with the botanicals described herein — Arizer and affiliated companies are not liable for use with other than those botanicals described herein. Company’s liabilities for damages in connection with the product and its parts shall not exceed the purchase price of the product.
IMPORTANT – Obey local laws. Not all essential oils, botanicals and herbs are legal for use in every Country or State. Check your Local, State, Federal and Importation laws before ordering botanicals. This device is meant for legal use only.
Battery Safety & Warnings (Read before use)
Lithium batteries are volatile. Failure to read and follow these instructions may result in fire, personal injury and damage to property if charged or used improperly.
– Always handle your batteries with care – never drop them.
– Fully charge your Arizer Go Batteries before first use.
– Only use official Arizer Go Batteries & Chargers. Do not use any third-party, counterfeit, or unknown brand batteries or chargers.
– Lithium batteries can explode or cause a fire if they are used incorrectly or if they are defective. Do not tamper with or misuse the Arizer Go Batteries and do not use damaged/defective batteries.
– Arizer Go Batteries are manufactured to strict quality standards, specifically for use with the Arizer Go.
– Always match positive (+) and negative (-) when inserting batteries into the Arizer Go and the Arizer Go Battery Chargers.
– Batteries that are not in use should be stored in a safe, cool, dry place, individually in a plastic holder or container / away from all metal objects.
– Do not store your batteries fully charged or fully drained for extended periods of time (one month or longer).
Never throw the Arizer Go Batteries away and never put them into a battery collection box. If you have dropped the battery or notice physical damage you should take the following steps:
- Store the battery in a safe, dry place and leave it for at least one hour in case there is a short circuit and the battery starts heating up.
- Check to see if the battery has become hot. If so, leave the battery until it has cooled off.
- For further protection, wrap the battery in a piece of kitchen paper and seal it with tape.
- Put the battery into a box and label it: “Lithium – Ion battery” and hand it in to a chemical waste disposal facility.
Counterfeit & Inferior – Quality Battery Warning:
-Customers are urged to be careful when purchasing batteries due to the flood of counterfeit and inferior-quality batteries for sale often found on online-auction and various websites.
-The use of counterfeit and/or inferior-quality lithium batteries can cause internal shorts leading to fires and/or explosions which can result in property damage and/or personal injury.
– The use of counterfeit and/or inferior-quality batteries could greatly reduce runtime and output performance, damage your Arizer Go, constitute a safety hazard, and voids all warranties.
If you experience an issue with your Arizer Go send an email to [email protected] and an expert Arizer customer service representative will reply as soon as possible to troubleshoot and determine the best way to resolve any issues. To help expedite your service request please include a description of the problem, your full name, your shipping address, the serial number on the bottom of your device, and a copy of your sales receipt.
Arizer Go Support
All the topics and information you need for the Arizer Go.
- 1 x Arizer Go Portable Micro-Heater
- 1 x Go Battery
- 1 x Go USB Charger / Power Adapter
- 2 x Go Glass Aroma Tube
- 2 x Go PVC Travel Tube w./ Cap
- 1 x Go Belt-Clip Carry Case
- 2 x Go Silicone Stem Caps
- 1 x Stainless Steel Stirring Tool
- 4 x Go Stainless Steel Filter Screens
- 1 x Arizer Go Owners Manual
Arizer Batteries meet rigorous quality standards. With normal use they will last for hundreds of charge cycles before losing any capacity. Dropping the battery or the unit can result in battery damage that may limit / reduce the battery capacity quickly, so it is important to handle the batteries and your unit carefully.
Battery Charge
Depending on the temperature setting and general usage patterns the Arizer Go battery will typically last for 1.5 hours of use per charge. The battery will take 3.5 hours to fully charge, or longer if you use it while charging.
Use While Charging
If your battery is running low, with the Arizer Go you don’t have to wait for the battery to fully charge before you can use it. Just partially charge the battery (15-20 minutes) and then you can set the temperature and use the Arizer Go while the battery continues charging. Note: The Arizer Go will not operate if the battery is completely drained.
Interchangeable / Swappable Battery
An easily interchangeable battery allows you to have some spare batteries fully charged as a back-up for when your battery is running low and for extended use on the go.
Battery Conservation
The Arizer Go and Arizer Go Chargers have built-in protections to prevent the battery from being overcharged or drained too low. To conserve battery life, use the Arizer Go in a temperature controlled environment and use the lower temperature settings. When outdoors, stay sheltered from the elements and avoid using in extremely cold temperatures. Charge the battery as necessary. Do not store the battery fully charged or fully drained for longer than one month (store with partial charge).
Safety Disclaimer
Arizer Batteries should not be substituted for third-party batteries — Only use official Arizer Go Batteries with your Arizer Go. We cannot verify the quality or safety of other batteries, and using third-party batteries can result in personal injury, electric shock, and damage to the device which is not covered under warranty.
The Control Panel consists of the OLED and three buttons: the Menu button and the plus (+) & minus (-) buttons. Use the Menu button to navigate through the different settings and the plus & minus buttons to adjust them.
Temperature Settings
The Arizer Go’s optimized heating system warms up fast and has a wide temperature range of 50°C-220° C (122°F- 428° F). The temperature is adjustable in 1-degree increments and 10-degree increments.
Audio / Beep
The Audio / Beep function has three volume settings and can be turned on and off. If the Audio / Beep is activated, a beep will be heard when the Arizer Go is powered on or off. If the Audio / Beep is deactivated, the Arizer Go remains silent when powered on or off.
Temperature Alert
This function has three volume settings and can also be turned off. If the Temperature Alert is activated two beeps will be heard when the set temperature is reached.
Power-On Delay
The power-on delay safety feature ensures you don’t accidentally turn on the unit and has four settings for your convenience: 2 seconds, 4 Seconds, 6 Seconds, and 8 Seconds. The default setting is 6 seconds.
Automatic Shut-Off Timer
The automatic shut-off timer safety feature ensures you don’t forget to turn off the unit and helps conserve battery life. The shut-off timer can be adjusted between 5–15 minutes in one-minute increments. The default setting is 10-minutes.
Celsius or Fahrenheit
The Arizer Go display can be set to Celsius or Fahrenheit. The default setting is Celsius.
Display Brightness
The Arizer Go’s display has three brightness settings: low, medium, and high. The default setting is medium.
A full range of parts and accessories to equip and protect your Air II are available for purchase here.
If you can’t find the part you need send us an email to: [email protected] with a description of the part you need.
The Arizer Go is ultra-compact, lightweight, and completely portable, conveniently fitting in the palm of your hand, pocket, or purse.
- Weight: 97 grams
- Length: 52 mm
- Width: 24 mm
- Height: 83 mm/ 93 mm
Equipped for worldwide use with an input capacityof 110-240V and international safety certifications.
The Arizer Go carries a lifetime warranty on the heating element, and a limited 2-Year warranty covering defects in materials or workmanship, excluding battery. Glass is not covered under warranty. Retain proof of purchase for warranty service. Returning the product and costs incurred are the responsibility of the user. Arizer will repair or replace warrantied items at our discretion. The warranty does not cover units damaged by dropping, tampering, unauthorized service performed or attempted, modifying the unit,misuse or abuse.
Cautions, Disclaimers and Warnings (Read Before Use)
First Time Use – Examine box contents to ensure all included parts are in good condition, not damaged from shipping. Check glass parts for cracks or breakage. Packaging materials, bags, & small parts may pose a choking hazard. Keep out of reach/use from children, minors, and pets. Glass Aroma Tubes may fit tightly in the unit at first. If you are finding it difficult to insert a Glass Aroma Tube, turn on the Arizer Go, set the temperature to 200° C, and let the unit heat for 1-2 minutes then try again. To burn off any residues from packaging, turn on the unit, set the temperature to 220° C, and let the unit heat for 5 – 10 minutes.
Warning – Hot Parts – Handle hot parts and glass parts with care. Do not place hot parts on non-heat safe surfaces. Carefully attach protective heat-rated silicone caps to safely cover hot end of glass parts. Allow heating unit and hot parts to cool before placing in purse, pocket, or any container where damage from hot parts can occur.
Parts are made from strong scientific quality borosilicate glass, but all borosilicate glass is breakable so handle with care and caution. Avoid tapping on hard surfaces to prevent cracking and breaking. If glass is dropped or sustains an impact, examine for cracking, chipping and weakness before use. Do not expose hot glass parts to cold water or extreme temperature change as this may result in cracking/breaking.
Product contains electrical and delicate parts — do not drop. If damaged do not operate. To protect/prevent against electric shock/fire never immerse or operate the product in or around any water/liquids. Do not stick or pour anything in the unit or place near flammable material. Do not store/operate/expose the unit and contents to extreme temperatures. Do not open the unit – doing so may cause electric shock and voids warranty.
Do not leave the unit turned on and left unattended.
The information contained in this manual is an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficacy or use of its preparation. This information is not intended in any way to replace or supersede professional consultations.
The information contained herein is for instructional and cautionary purposes only. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition, or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device, use unit only for its intended use.
Safety Certifications
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
Limitation of Liability (Read before use)
Failure to read or follow instructions, improper or careless use may lead to personal injury. Arizer and affiliated companies will not assume any liability for injury or damage resulting from the use or misuse of this device. Due to the fragility and nature of glass Arizer and affiliated companies are not responsible for cuts or injuries sustained from breakage. Arizer and affiliated companies are not liable for injuries or burns associated from touching hot parts. Arizer and affiliated companies are not liable for failures to comply with these warnings and safety guidelines. By purchasing this product, the buyer assumes all risks associated with lithium batteries. If you do not agree with these conditions return the product immediately before use.
This product is intended for use with the botanicals described herein — Arizer and affiliated companies are not liable for use with other than those botanicals described herein. Company’s liabilities for damages in connection with the product and its parts shall not exceed the purchase price of the product.
IMPORTANT – Obey local laws. Not all essential oils, botanicals and herbs are legal for use in every Country or State. Check your Local, State, Federal and Importation laws before ordering botanicals. This device is meant for legal use only.
Battery Safety & Warnings (Read before use)
Lithium batteries are volatile. Failure to read and follow these instructions may result in fire, personal injury and damage to property if charged or used improperly.
– Always handle your batteries with care – never drop them.
– Fully charge your Arizer Go Batteries before first use.
– Only use official Arizer Go Batteries & Chargers. Do not use any third-party, counterfeit, or unknown brand batteries or chargers.
– Lithium batteries can explode or cause a fire if they are used incorrectly or if they are defective. Do not tamper with or misuse the Arizer Go Batteries and do not use damaged/defective batteries.
– Arizer Go Batteries are manufactured to strict quality standards, specifically for use with the Arizer Go.
– Always match positive (+) and negative (-) when inserting batteries into the Arizer Go and the Arizer Go Battery Chargers.
– Batteries that are not in use should be stored in a safe, cool, dry place, individually in a plastic holder or container / away from all metal objects.
– Do not store your batteries fully charged or fully drained for extended periods of time (one month or longer).
Never throw the Arizer Go Batteries away and never put them into a battery collection box. If you have dropped the battery or notice physical damage you should take the following steps:
- Store the battery in a safe, dry place and leave it for at least one hour in case there is a short circuit and the battery starts heating up.
- Check to see if the battery has become hot. If so, leave the battery until it has cooled off.
- For further protection, wrap the battery in a piece of kitchen paper and seal it with tape.
- Put the battery into a box and label it: “Lithium – Ion battery” and hand it in to a chemical waste disposal facility.
Counterfeit & Inferior – Quality Battery Warning:
-Customers are urged to be careful when purchasing batteries due to the flood of counterfeit and inferior-quality batteries for sale often found on online-auction and various websites.
-The use of counterfeit and/or inferior-quality lithium batteries can cause internal shorts leading to fires and/or explosions which can result in property damage and/or personal injury.
– The use of counterfeit and/or inferior-quality batteries could greatly reduce runtime and output performance, damage your Arizer Go, constitute a safety hazard, and voids all warranties.
If you experience an issue with your Arizer Go send an email to [email protected] and an expert Arizer customer service representative will reply as soon as possible to troubleshoot and determine the best way to resolve any issues. To help expedite your service request please include a description of the problem, your full name, your shipping address, the serial number on the bottom of your device, and a copy of your sales receipt.
Arizer Go Support
All the topics and information you need for the Arizer Go.
- 1 x Arizer Go Portable Micro-Heater
- 1 x Go Battery
- 1 x Go USB Charger / Power Adapter
- 2 x Go Glass Aroma Tube
- 2 x Go PVC Travel Tube w./ Cap
- 1 x Go Belt-Clip Carry Case
- 2 x Go Silicone Stem Caps
- 1 x Stainless Steel Stirring Tool
- 4 x Go Stainless Steel Filter Screens
- 1 x Arizer Go Owners Manual
Arizer Batteries meet rigorous quality standards. With normal use they will last for hundreds of charge cycles before losing any capacity. Dropping the battery or the unit can result in battery damage that may limit / reduce the battery capacity quickly, so it is important to handle the batteries and your unit carefully.
Battery Charge
Depending on the temperature setting and general usage patterns the Arizer Go battery will typically last for 1.5 hours of use per charge. The battery will take 3.5 hours to fully charge, or longer if you use it while charging.
Use While Charging
If your battery is running low, with the Arizer Go you don’t have to wait for the battery to fully charge before you can use it. Just partially charge the battery (15-20 minutes) and then you can set the temperature and use the Arizer Go while the battery continues charging. Note: The Arizer Go will not operate if the battery is completely drained.
Interchangeable / Swappable Battery
An easily interchangeable battery allows you to have some spare batteries fully charged as a back-up for when your battery is running low and for extended use on the go.
Battery Conservation
The Arizer Go and Arizer Go Chargers have built-in protections to prevent the battery from being overcharged or drained too low. To conserve battery life, use the Arizer Go in a temperature controlled environment and use the lower temperature settings. When outdoors, stay sheltered from the elements and avoid using in extremely cold temperatures. Charge the battery as necessary. Do not store the battery fully charged or fully drained for longer than one month (store with partial charge).
Safety Disclaimer
Arizer Batteries should not be substituted for third-party batteries — Only use official Arizer Go Batteries with your Arizer Go. We cannot verify the quality or safety of other batteries, and using third-party batteries can result in personal injury, electric shock, and damage to the device which is not covered under warranty.
The Control Panel consists of the OLED and three buttons: the Menu button and the plus (+) & minus (-) buttons. Use the Menu button to navigate through the different settings and the plus & minus buttons to adjust them.
Temperature Settings
The Arizer Go’s optimized heating system warms up fast and has a wide temperature range of 50°C-220° C (122°F- 428° F). The temperature is adjustable in 1-degree increments and 10-degree increments.
Audio / Beep
The Audio / Beep function has three volume settings and can be turned on and off. If the Audio / Beep is activated, a beep will be heard when the Arizer Go is powered on or off. If the Audio / Beep is deactivated, the Arizer Go remains silent when powered on or off.
Temperature Alert
This function has three volume settings and can also be turned off. If the Temperature Alert is activated two beeps will be heard when the set temperature is reached.
Power-On Delay
The power-on delay safety feature ensures you don’t accidentally turn on the unit and has four settings for your convenience: 2 seconds, 4 Seconds, 6 Seconds, and 8 Seconds. The default setting is 6 seconds.
Automatic Shut-Off Timer
The automatic shut-off timer safety feature ensures you don’t forget to turn off the unit and helps conserve battery life. The shut-off timer can be adjusted between 5–15 minutes in one-minute increments. The default setting is 10-minutes.
Celsius or Fahrenheit
The Arizer Go display can be set to Celsius or Fahrenheit. The default setting is Celsius.
Display Brightness
The Arizer Go’s display has three brightness settings: low, medium, and high. The default setting is medium.
A full range of parts and accessories to equip and protect your Air II are available for purchase here.
If you can’t find the part you need send us an email to: [email protected] with a description of the part you need.
The Arizer Go is ultra-compact, lightweight, and completely portable, conveniently fitting in the palm of your hand, pocket, or purse.
- Weight: 97 grams
- Length: 52 mm
- Width: 24 mm
- Height: 83 mm/ 93 mm
Equipped for worldwide use with an input capacityof 110-240V and international safety certifications.
The Arizer Go carries a lifetime warranty on the heating element, and a limited 2-Year warranty covering defects in materials or workmanship, excluding battery. Glass is not covered under warranty. Retain proof of purchase for warranty service. Returning the product and costs incurred are the responsibility of the user. Arizer will repair or replace warrantied items at our discretion. The warranty does not cover units damaged by dropping, tampering, unauthorized service performed or attempted, modifying the unit,misuse or abuse.
Cautions, Disclaimers and Warnings (Read Before Use)
First Time Use – Examine box contents to ensure all included parts are in good condition, not damaged from shipping. Check glass parts for cracks or breakage. Packaging materials, bags, & small parts may pose a choking hazard. Keep out of reach/use from children, minors, and pets. Glass Aroma Tubes may fit tightly in the unit at first. If you are finding it difficult to insert a Glass Aroma Tube, turn on the Arizer Go, set the temperature to 200° C, and let the unit heat for 1-2 minutes then try again. To burn off any residues from packaging, turn on the unit, set the temperature to 220° C, and let the unit heat for 5 – 10 minutes.
Warning – Hot Parts – Handle hot parts and glass parts with care. Do not place hot parts on non-heat safe surfaces. Carefully attach protective heat-rated silicone caps to safely cover hot end of glass parts. Allow heating unit and hot parts to cool before placing in purse, pocket, or any container where damage from hot parts can occur.
Parts are made from strong scientific quality borosilicate glass, but all borosilicate glass is breakable so handle with care and caution. Avoid tapping on hard surfaces to prevent cracking and breaking. If glass is dropped or sustains an impact, examine for cracking, chipping and weakness before use. Do not expose hot glass parts to cold water or extreme temperature change as this may result in cracking/breaking.
Product contains electrical and delicate parts — do not drop. If damaged do not operate. To protect/prevent against electric shock/fire never immerse or operate the product in or around any water/liquids. Do not stick or pour anything in the unit or place near flammable material. Do not store/operate/expose the unit and contents to extreme temperatures. Do not open the unit – doing so may cause electric shock and voids warranty.
Do not leave the unit turned on and left unattended.
The information contained in this manual is an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficacy or use of its preparation. This information is not intended in any way to replace or supersede professional consultations.
The information contained herein is for instructional and cautionary purposes only. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition, or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device, use unit only for its intended use.
Safety Certifications
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
Limitation of Liability (Read before use)
Failure to read or follow instructions, improper or careless use may lead to personal injury. Arizer and affiliated companies will not assume any liability for injury or damage resulting from the use or misuse of this device. Due to the fragility and nature of glass Arizer and affiliated companies are not responsible for cuts or injuries sustained from breakage. Arizer and affiliated companies are not liable for injuries or burns associated from touching hot parts. Arizer and affiliated companies are not liable for failures to comply with these warnings and safety guidelines. By purchasing this product, the buyer assumes all risks associated with lithium batteries. If you do not agree with these conditions return the product immediately before use.
This product is intended for use with the botanicals described herein — Arizer and affiliated companies are not liable for use with other than those botanicals described herein. Company’s liabilities for damages in connection with the product and its parts shall not exceed the purchase price of the product.
IMPORTANT – Obey local laws. Not all essential oils, botanicals and herbs are legal for use in every Country or State. Check your Local, State, Federal and Importation laws before ordering botanicals. This device is meant for legal use only.
Battery Safety & Warnings (Read before use)
Lithium batteries are volatile. Failure to read and follow these instructions may result in fire, personal injury and damage to property if charged or used improperly.
– Always handle your batteries with care – never drop them.
– Fully charge your Arizer Go Batteries before first use.
– Only use official Arizer Go Batteries & Chargers. Do not use any third-party, counterfeit, or unknown brand batteries or chargers.
– Lithium batteries can explode or cause a fire if they are used incorrectly or if they are defective. Do not tamper with or misuse the Arizer Go Batteries and do not use damaged/defective batteries.
– Arizer Go Batteries are manufactured to strict quality standards, specifically for use with the Arizer Go.
– Always match positive (+) and negative (-) when inserting batteries into the Arizer Go and the Arizer Go Battery Chargers.
– Batteries that are not in use should be stored in a safe, cool, dry place, individually in a plastic holder or container / away from all metal objects.
– Do not store your batteries fully charged or fully drained for extended periods of time (one month or longer).
Never throw the Arizer Go Batteries away and never put them into a battery collection box. If you have dropped the battery or notice physical damage you should take the following steps:
- Store the battery in a safe, dry place and leave it for at least one hour in case there is a short circuit and the battery starts heating up.
- Check to see if the battery has become hot. If so, leave the battery until it has cooled off.
- For further protection, wrap the battery in a piece of kitchen paper and seal it with tape.
- Put the battery into a box and label it: “Lithium – Ion battery” and hand it in to a chemical waste disposal facility.
Counterfeit & Inferior – Quality Battery Warning:
-Customers are urged to be careful when purchasing batteries due to the flood of counterfeit and inferior-quality batteries for sale often found on online-auction and various websites.
-The use of counterfeit and/or inferior-quality lithium batteries can cause internal shorts leading to fires and/or explosions which can result in property damage and/or personal injury.
– The use of counterfeit and/or inferior-quality batteries could greatly reduce runtime and output performance, damage your Arizer Go, constitute a safety hazard, and voids all warranties.
If you experience an issue with your Arizer Go send an email to [email protected] and an expert Arizer customer service representative will reply as soon as possible to troubleshoot and determine the best way to resolve any issues. To help expedite your service request please include a description of the problem, your full name, your shipping address, the serial number on the bottom of your device, and a copy of your sales receipt.
Arizer Go Support
All the topics and information you need for the Arizer Go.
- 1 x Arizer Go Portable Micro-Heater
- 1 x Go Battery
- 1 x Go USB Charger / Power Adapter
- 2 x Go Glass Aroma Tube
- 2 x Go PVC Travel Tube w./ Cap
- 1 x Go Belt-Clip Carry Case
- 2 x Go Silicone Stem Caps
- 1 x Stainless Steel Stirring Tool
- 4 x Go Stainless Steel Filter Screens
- 1 x Arizer Go Owners Manual
Arizer Batteries meet rigorous quality standards. With normal use they will last for hundreds of charge cycles before losing any capacity. Dropping the battery or the unit can result in battery damage that may limit / reduce the battery capacity quickly, so it is important to handle the batteries and your unit carefully.
Battery Charge
Depending on the temperature setting and general usage patterns the Arizer Go battery will typically last for 1.5 hours of use per charge. The battery will take 3.5 hours to fully charge, or longer if you use it while charging.
Use While Charging
If your battery is running low, with the Arizer Go you don’t have to wait for the battery to fully charge before you can use it. Just partially charge the battery (15-20 minutes) and then you can set the temperature and use the Arizer Go while the battery continues charging. Note: The Arizer Go will not operate if the battery is completely drained.
Interchangeable / Swappable Battery
An easily interchangeable battery allows you to have some spare batteries fully charged as a back-up for when your battery is running low and for extended use on the go.
Battery Conservation
The Arizer Go and Arizer Go Chargers have built-in protections to prevent the battery from being overcharged or drained too low. To conserve battery life, use the Arizer Go in a temperature controlled environment and use the lower temperature settings. When outdoors, stay sheltered from the elements and avoid using in extremely cold temperatures. Charge the battery as necessary. Do not store the battery fully charged or fully drained for longer than one month (store with partial charge).
Safety Disclaimer
Arizer Batteries should not be substituted for third-party batteries — Only use official Arizer Go Batteries with your Arizer Go. We cannot verify the quality or safety of other batteries, and using third-party batteries can result in personal injury, electric shock, and damage to the device which is not covered under warranty.
The Control Panel consists of the OLED and three buttons: the Menu button and the plus (+) & minus (-) buttons. Use the Menu button to navigate through the different settings and the plus & minus buttons to adjust them.
Temperature Settings
The Arizer Go’s optimized heating system warms up fast and has a wide temperature range of 50°C-220° C (122°F- 428° F). The temperature is adjustable in 1-degree increments and 10-degree increments.
Audio / Beep
The Audio / Beep function has three volume settings and can be turned on and off. If the Audio / Beep is activated, a beep will be heard when the Arizer Go is powered on or off. If the Audio / Beep is deactivated, the Arizer Go remains silent when powered on or off.
Temperature Alert
This function has three volume settings and can also be turned off. If the Temperature Alert is activated two beeps will be heard when the set temperature is reached.
Power-On Delay
The power-on delay safety feature ensures you don’t accidentally turn on the unit and has four settings for your convenience: 2 seconds, 4 Seconds, 6 Seconds, and 8 Seconds. The default setting is 6 seconds.
Automatic Shut-Off Timer
The automatic shut-off timer safety feature ensures you don’t forget to turn off the unit and helps conserve battery life. The shut-off timer can be adjusted between 5–15 minutes in one-minute increments. The default setting is 10-minutes.
Celsius or Fahrenheit
The Arizer Go display can be set to Celsius or Fahrenheit. The default setting is Celsius.
Display Brightness
The Arizer Go’s display has three brightness settings: low, medium, and high. The default setting is medium.
A full range of parts and accessories to equip and protect your Air II are available for purchase here.
If you can’t find the part you need send us an email to: [email protected] with a description of the part you need.
The Arizer Go is ultra-compact, lightweight, and completely portable, conveniently fitting in the palm of your hand, pocket, or purse.
- Weight: 97 grams
- Length: 52 mm
- Width: 24 mm
- Height: 83 mm/ 93 mm
Equipped for worldwide use with an input capacityof 110-240V and international safety certifications.
The Arizer Go carries a lifetime warranty on the heating element, and a limited 2-Year warranty covering defects in materials or workmanship, excluding battery. Glass is not covered under warranty. Retain proof of purchase for warranty service. Returning the product and costs incurred are the responsibility of the user. Arizer will repair or replace warrantied items at our discretion. The warranty does not cover units damaged by dropping, tampering, unauthorized service performed or attempted, modifying the unit,misuse or abuse.
Cautions, Disclaimers and Warnings (Read Before Use)
First Time Use – Examine box contents to ensure all included parts are in good condition, not damaged from shipping. Check glass parts for cracks or breakage. Packaging materials, bags, & small parts may pose a choking hazard. Keep out of reach/use from children, minors, and pets. Glass Aroma Tubes may fit tightly in the unit at first. If you are finding it difficult to insert a Glass Aroma Tube, turn on the Arizer Go, set the temperature to 200° C, and let the unit heat for 1-2 minutes then try again. To burn off any residues from packaging, turn on the unit, set the temperature to 220° C, and let the unit heat for 5 – 10 minutes.
Warning – Hot Parts – Handle hot parts and glass parts with care. Do not place hot parts on non-heat safe surfaces. Carefully attach protective heat-rated silicone caps to safely cover hot end of glass parts. Allow heating unit and hot parts to cool before placing in purse, pocket, or any container where damage from hot parts can occur.
Parts are made from strong scientific quality borosilicate glass, but all borosilicate glass is breakable so handle with care and caution. Avoid tapping on hard surfaces to prevent cracking and breaking. If glass is dropped or sustains an impact, examine for cracking, chipping and weakness before use. Do not expose hot glass parts to cold water or extreme temperature change as this may result in cracking/breaking.
Product contains electrical and delicate parts — do not drop. If damaged do not operate. To protect/prevent against electric shock/fire never immerse or operate the product in or around any water/liquids. Do not stick or pour anything in the unit or place near flammable material. Do not store/operate/expose the unit and contents to extreme temperatures. Do not open the unit – doing so may cause electric shock and voids warranty.
Do not leave the unit turned on and left unattended.
The information contained in this manual is an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficacy or use of its preparation. This information is not intended in any way to replace or supersede professional consultations.
The information contained herein is for instructional and cautionary purposes only. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition, or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device, use unit only for its intended use.
Safety Certifications
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
Limitation of Liability (Read before use)
Failure to read or follow instructions, improper or careless use may lead to personal injury. Arizer and affiliated companies will not assume any liability for injury or damage resulting from the use or misuse of this device. Due to the fragility and nature of glass Arizer and affiliated companies are not responsible for cuts or injuries sustained from breakage. Arizer and affiliated companies are not liable for injuries or burns associated from touching hot parts. Arizer and affiliated companies are not liable for failures to comply with these warnings and safety guidelines. By purchasing this product, the buyer assumes all risks associated with lithium batteries. If you do not agree with these conditions return the product immediately before use.
This product is intended for use with the botanicals described herein — Arizer and affiliated companies are not liable for use with other than those botanicals described herein. Company’s liabilities for damages in connection with the product and its parts shall not exceed the purchase price of the product.
IMPORTANT – Obey local laws. Not all essential oils, botanicals and herbs are legal for use in every Country or State. Check your Local, State, Federal and Importation laws before ordering botanicals. This device is meant for legal use only.
Battery Safety & Warnings (Read before use)
Lithium batteries are volatile. Failure to read and follow these instructions may result in fire, personal injury and damage to property if charged or used improperly.
– Always handle your batteries with care – never drop them.
– Fully charge your Arizer Go Batteries before first use.
– Only use official Arizer Go Batteries & Chargers. Do not use any third-party, counterfeit, or unknown brand batteries or chargers.
– Lithium batteries can explode or cause a fire if they are used incorrectly or if they are defective. Do not tamper with or misuse the Arizer Go Batteries and do not use damaged/defective batteries.
– Arizer Go Batteries are manufactured to strict quality standards, specifically for use with the Arizer Go.
– Always match positive (+) and negative (-) when inserting batteries into the Arizer Go and the Arizer Go Battery Chargers.
– Batteries that are not in use should be stored in a safe, cool, dry place, individually in a plastic holder or container / away from all metal objects.
– Do not store your batteries fully charged or fully drained for extended periods of time (one month or longer).
Never throw the Arizer Go Batteries away and never put them into a battery collection box. If you have dropped the battery or notice physical damage you should take the following steps:
- Store the battery in a safe, dry place and leave it for at least one hour in case there is a short circuit and the battery starts heating up.
- Check to see if the battery has become hot. If so, leave the battery until it has cooled off.
- For further protection, wrap the battery in a piece of kitchen paper and seal it with tape.
- Put the battery into a box and label it: “Lithium – Ion battery” and hand it in to a chemical waste disposal facility.
Counterfeit & Inferior – Quality Battery Warning:
-Customers are urged to be careful when purchasing batteries due to the flood of counterfeit and inferior-quality batteries for sale often found on online-auction and various websites.
-The use of counterfeit and/or inferior-quality lithium batteries can cause internal shorts leading to fires and/or explosions which can result in property damage and/or personal injury.
– The use of counterfeit and/or inferior-quality batteries could greatly reduce runtime and output performance, damage your Arizer Go, constitute a safety hazard, and voids all warranties.
If you experience an issue with your Arizer Go send an email to [email protected] and an expert Arizer customer service representative will reply as soon as possible to troubleshoot and determine the best way to resolve any issues. To help expedite your service request please include a description of the problem, your full name, your shipping address, the serial number on the bottom of your device, and a copy of your sales receipt.
Arizer Air II Support
- 1 x Air II Portable Micro-Heater
- 1 x Air II Battery
- 1 x Air II USB Charger/Power Adapter
- 1 x Air II Glass Aroma Tube (70mm)
- 1 x Air II Tipped Glass Aroma Tube (70mm)
- 1 x Air II Glass Aroma Dish
- 2 x Air II Silicone Stem Caps
- 2 x Air II PVC Travel Tubes w/Cap (70mm Size)
- 1 x Air II PVC Travel Tube w/Cap (Aroma Dish Size)
- 1 x Air II Belt-Clip Carry Case
- 1 x Stainless Steel Stirring Tool
- 4 x Air II Stainless Steel Filter Screens
- 1 x Sample Aromatic Botanicals
- 1 x Air II Owner’s Manual
Arizer Batteries meet rigorous quality standards. With normal use they will last for hundreds of charge cycles before losing any capacity. Dropping the battery or the unit can result in battery damage that may limit / reduce the battery capacity quickly, so it is important to handle the batteries and your unit carefully.
Battery Charge
Depending on the temperature setting and general usage patterns the Air II battery can last for up to 90 minutes of continuous use per charge. The battery will take approximately 3 hours to fully charge, or longer if you use it while charging. Use While Charging If your battery is running low, with the Air II you don’t have to wait for the battery to fully charge before you can use it. Just partially charge the battery (15-20 minutes) and then you can set the temperature and use the Air II while the battery continues charging. Note: The Air II will not operate if the battery is completely drained.
Battery Conservation
The Arizer Air II and Air II Chargers have built-in protections to prevent the battery from being overcharged or drained too low. To conserve battery life, use the Arizer Air II in a temperature-controlled environment and use lower temperature settings. When outdoors, stay sheltered from the elements and avoid using in extremely cold temperatures. Charge the battery as necessary. Do not store the battery fully charged or fully drained for longer than one month (store with partial charge).
The Control Panel consists of the OLED and three buttons: the Menu button and the plus (+) & minus (-) buttons. Use the Menu button to navigate through the different settings and the plus & minus buttons to adjust them.
Temperature Settings
The Air II’s optimized heating system warms up fast and has a wide temperature range of 50°C-220° C (122°F- 428° F). The temperature is adjustable in 1-degree increments and 10-degree increments.
Audio / Beep
The Audio / Beep function has three volume settings and can be turned on and off. If the Audio / Beep is activated, a beep will be heard when the Air II is powered on or off. If the Audio / Beep is deactivated, the Air II remains silent when powered on or off.
Power-On Delay
The power-on delay safety feature ensures you don’t accidentally turn on the unit and has four settings for your convenience: 2 seconds, 4 Seconds, 6 Seconds, and 8 Seconds. The default setting is 6 seconds.
Automatic Shut-Off Timer
The automatic shut-off timer safety feature ensures you don’t forget to turn off the unit and helps conserve battery life. The shut-off timer can be adjusted between 5–15 minutes in one-minute increments. The default setting is 10-minutes.
Celsius or Fahrenheit
The Air II display can be set to Celsius or Fahrenheit. The default setting is Celsius.
Display Brightness
The unit’s display has three brightness settings: low, medium, and high. The default setting is medium.
A full range of parts and accessories to equip and protect your Air II are available for purchase here. If you can’t find the part you need send an email to: [email protected] with a description of the part you need.
Note: Metal screens are included and available for your convenience but they make vapor harsh and diminish the flavors. The Air II Glass Aroma Tubes have a built-in screen to keep vapor pure and flavorful so we recommend using whole or coarsely ground botanicals with no metal screen for smooth and tasty vapor.
The Air II is ulta-compact, lightweight, and completely portable, conveniently fitting in the palm of your hand, pocket, or purse.
- Weight: 116 grams
- Height: 122mm
- Diameter: 29mm
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
The Air II carries a lifetime warranty on the heating element, and a limited 2-Year warranty covering defects in materials or workmanship, excluding battery. Glass is not covered under warranty. Retain proof of purchase for warranty service. Returning the product and costs incurred are the responsibility of the user. Arizer will repair or replace warrantied items at our discretion. The warranty does not cover units damaged by dropping, tampering, unauthorized service performed or attempted, modifying the unit,misuse or abuse.
Cautions, Disclaimers and Warnings (Read Before Use)
First Time Use – Examine box contents to ensure all included parts are in good condition, not damaged from shipping. Check glass parts for cracks or breakage. Packaging materials, bags, & small parts may pose a choking hazard. Keep out of reach/use from children, minors, and pets. Glass Aroma Tubes may fit tightly in the unit at first. If you are finding it difficult to insert a Glass Aroma Tube, turn on the Air II, set the temperature to 200° C, and let the unit heat for 1-2 minutes then try again. To burn off any residues from packaging, turn on the unit, set the temperature to 220° C, and let the unit heat for 5 – 10 minutes.
Warning – Hot Parts – Handle hot parts and glass parts with care. Do not place hot parts on non-heat safe surfaces. Carefully attach protective heat-rated silicone caps to safely cover hot end of glass parts. Allow heating unit and hot parts to cool before placing in purse, pocket, or any container where damage from hot parts can occur.
Parts are made from strong scientific quality borosilicate glass, but all borosilicate glass is breakable so handle with care and caution. Avoid tapping on hard surfaces to prevent cracking and breaking. If glass is dropped or sustains an impact, examine for cracking, chipping and weakness before use. Do not expose hot glass parts to cold water or extreme temperature change as this may result in cracking/breaking.
Product contains electrical and delicate parts — do not drop. If damaged do not operate. To protect/prevent against electric shock/fire never immerse or operate the product in or around any water/liquids. Do not stick or pour anything in the unit or place near flammable material. Do not store/operate/expose the unit and contents to extreme temperatures. Do not open the unit – doing so may cause electric shock and voids warranty.
Do not leave the unit turned on and left unattended.
The information contained in this manual is an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficacy or use of its preparation. This information is not intended in any way to replace or supersede professional consultations.
The information contained herein is for instructional and cautionary purposes only. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition, or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device, use unit only for its intended use.
Safety Certifications
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
Limitation of Liability (Read before use)
Failure to read or follow instructions, improper or careless use may lead to personal injury. Arizer and affiliated companies will not assume any liability for injury or damage resulting from the use or misuse of this device. Due to the fragility and nature of glass Arizer and affiliated companies are not responsible for cuts or injuries sustained from breakage. Arizer and affiliated companies are not liable for injuries or burns associated from touching hot parts. Arizer and affiliated companies are not liable for failures to comply with these warnings and safety guidelines. By purchasing this product, the buyer assumes all risks associated with lithium batteries. If you do not agree with these conditions return the product immediately before use.
This product is intended for use with the botanicals described herein — Arizer and affiliated companies are not liable for use with other than those botanicals described herein. Company’s liabilities for damages in connection with the product and its parts shall not exceed the purchase price of the product.
IMPORTANT – Obey local laws. Not all essential oils, botanicals and herbs are legal for use in every Country or State. Check your Local, State, Federal and Importation laws before ordering botanicals. This device is meant for legal use only.
Battery Safety & Warnings (Read before use)
Lithium batteries are volatile. Failure to read and follow these instructions may result in fire, personal injury and damage to property if charged or used improperly. Always handle your batteries with care – never drop them. Fully charge your Arizer Air II Batteries before first use. Only use official Arizer Air II Batteries & Chargers. Do not use any third-party, counterfeit, or unknown brand batteries or chargers. Lithium batteries can explode or cause a fire if they are used incorrectly or if they are defective. Do not tamper with or misuse the Arizer Air II Batteries and do not use damaged/defective batteries. Arizer Air II Batteries are manufactured to strict quality standards, specifically for use with the Arizer Air II. Always match positive (+) and negative (-) when inserting batteries into the Arizer Air II and the Arizer Air II Battery Chargers. Batteries that are not in use should be stored in a safe, cool, dry place, individually in a plastic holder or container / away from all metal objects. Do not store your batteries fully charged or fully drained for extended periods of time (one month or longer).
Never throw the Air II Batteries away and never put them into a battery collection box. If you have dropped the battery or notice physical damage you should take the following steps:
- Store the battery in a safe, dry place and leave it for at least one hour in case there is a short circuit, and the battery starts heating up.
- Check to see if the battery has become hot. If so, leave the battery until it has cooled off.
- For further protection, wrap the battery in a piece of kitchen paper and seal it with tape.
- Put the battery into a box and label it: “Lithium Ion battery” and hand it in to a chemical waste disposal facility.
Counterfeit & Inferior – Quality Battery Warning:
Customers are urged to be careful when purchasing batteries due to the flood of counterfeit and inferior-quality batteries for sale often found on online-auction and various websites. The use of counterfeit and/or inferior-quality lithium batteries can cause internal shorts leading to fires and/or explosions which can result in property damage and/or personal injury. The use of counterfeit and/or inferior-quality batteries could greatly reduce runtime and output performance, damage your Air II, constitute a safety hazard, and voids all warranties.
If you experience an issue with your Air II send an email to [email protected] and an expert Arizer customer service representative will reply as soon as possible to troubleshoot and determine the best way to resolve any issues. To help expedite your service request please include a description of the problem, your full name, your shipping address, the serial number on the bottom of your device, and a copy of your sales receipt.
The Air II itself is essentially maintenance-free so you can spend your time using it instead of cleaning it! Simply recharge the battery when it is low, swap out pre-loaded Glass Aroma Tubes on the go without worry about emptying or cleaning bowls, and keep your herbs/botanicals contained in the removable Glass Aroma Tubes that can be cleaned effortless.
After numerous uses, the glass parts should be cleaned to ensure optimal performance. To clean the glass parts, soak them in isopropyl (rubbing) alcohol for a couple of hours then rinse with hot water. In most cases doing this will clean the Glass Aroma Tubes as good as new, but if not simply repeat as necessary. After cleaning, always ensure the Glass Aroma Tubes are fully dry before use.
numerous uses the glass parts should be cleaned to ensure optimal performance. To clean the glass parts, soak them in isopropyl (rubbing) alcohol for a couple of hours then rinse with hot water. In most cases doing this will clean the Glass Aroma Tubes as good as new, but if not simply repeat as necessary. After cleaning, always ensure the Glass Aroma Tubes are fully dry before use.
Solo II Support
- 1 x Solo II Portable Micro-Heater
- 1 x Solo II Charger / Power Adapter
- 1 x Solo II Glass Aroma Tube (90mm)
- 1 x Solo II Glass Aroma Tube (110mm)
- 1 x Solo II Glass Aroma Dish
- 1 x Solo II PVC Travel Tube w/Cap (90mm Size)
- 1 x Solo II PVC Travel Tube w/Cap (110mm Size)
- 1 x Solo II PVC Travel Tube w/Cap Aroma Dish Size
- 1 x Solo II Belt-Clip Carry Case
- 2 x Solo II Silicone Stem Caps
- 4 x Solo II Stainless Steel Filter Screens
- 1 x Stainless Steel Stirring Tool
- 1 x Solo II Owner’s Manual
Arizer Batteries meet rigorous quality standards. With normal use they will last for hundreds of charge cycles before losing any capacity. Dropping the battery or the unit can result in battery damage that may limit / reduce the battery capacity quickly, so it is important to handle your unit carefully.
Battery Charge
Depending on the temperature setting and general usage patterns the Solo II battery will typically last for 3 hours of use per charge. The battery will take 3 hours to fully charge, or longer if you use it while charging.
Use While Charging
If your battery is running low, with the Solo II you don’t have to wait for the battery to fully charge before you can use it. Just partially charge the battery (5-10 minutes) and then you can set the temperature and use the Solo II while the battery continues charging. Note: The Solo II will not operate if the battery is completely drained.
Battery Conservation
The Solo II and Solo II Chargers have built-in protections to prevent the battery from being overcharged or drained too low. To conserve battery life, use the Solo II in a temperature-controlled environment and use lower temperature settings. When outdoors, stay sheltered from the elements and avoid using in extremely cold temperatures. Charge the battery as necessary. Do not store the Solo II with the battery fully charged or fully drained for longer than one month (store with partial charge).
The Control Panel consists of the OLED and three buttons: the Menu (M) button, and the Up & Down arrow buttons. Use the Menu button to navigate through the different settings and the Up & Down buttons to adjust them.
Temperature Settings
The Solo II optimized heating system warms up fast and has a wide temperature range of 50° C – 220° C (122° F – 428° F). The temperature is adjustable in 1-degree increments and 10-degree increments.
Audio / Beep
The Audio / Beep function has three volume settings and can be turned on and off. If the Audio / Beep is activated, a beep will be heard when the Solo II is powered on or off. If the Audio / Beep is deactivated, the Solo II remains silent when powered on or off.
Power-On Delay
The power-on delay safety feature ensures you don’t accidentally turn on the unit and has three settings for your convenience: 4 Seconds, 6 Seconds, and 8 Seconds. The default setting is 6 seconds.
Automatic Shut-Off Timer
The automatic shut-off timer safety feature ensures you don’t forget to turn off the unit and helps conserve battery life. The shut-off timer can be adjusted between 5 – 15 minutes in one-minute increments. The default setting is 10-minutes.
Celsius or Fahrenheit
The Solo II display can be set to Celsius or Fahrenheit. The default setting is Celsius.
Display Brightness
The Solo II display has three brightness settings: low, medium, and high. The default setting is medium.
A full range of parts and accessories to equip and protect your Solo II are available for purchase here.
If you can’t find the part you need send us an email at: [email protected] with a description of the part you need.
Note: Metal screens are included and available for your convenience but they make vapor harsh and diminish the flavors. The Solo Glass Aroma Tubes have a built-in screen to keep vapor pure and flavorful so we recommend using whole or coarsely ground botanicals with no metal screen for smooth and tasty vapor.
The Solo II is compact, lightweight, and completely portable, conveniently fitting in the palm of your hand, pocket, or purse.
- Weight: 210 grams
- Length: 46 mm
- Width: 35 mm
- Height: 113 mm
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
The Solo II carries a lifetime warranty on the heating element, a limited 2-Year warranty covering defects in materials or workmanship, and a 1-Year limited warranty covering the battery. Glass is not covered under warranty. Retain proof of purchase for warranty service. Returning the product and costs incurred are the responsibility of the user. Arizer will repair or replace warrantied items at our discretion. The warranty does not cover units damaged by dropping, tampering, unauthorized service performed or attempted, modifying the unit, misuse or abuse.
Cautions, Disclaimers and Warnings (Read Before Use)
First Time Use – Examine box contents to ensure all included parts are in good condition, not damaged from shipping. Check glass parts for cracks or breakage. Packaging materials, bags, & small parts may pose a choking hazard. Keep out of reach/use from children, minors, and pets. Glass Aroma Tubes may fit tightly in the unit at first. If you are finding it difficult to insert a Glass Aroma Tube, turn on the Solo II, set the temperature to 200° C, and let the unit heat for 1-2 minutes then try again. To burn off any residues from packaging, turn on the unit, set the temperature to 220° C, and let the unit heat for 5 – 10 minutes.
Warning – Hot Parts – Handle hot parts and glass parts with care. Do not place hot parts on non-heat safe surfaces. Carefully attach protective heat-rated silicone caps to safely cover hot end of glass parts. Allow heating unit and hot parts to cool before placing in purse, pocket, or any container where damage from hot parts can occur. Parts are made from strong scientific quality borosilicate glass, but all borosilicate glass is breakable so handle with care and caution. Avoid tapping on hard surfaces to prevent cracking and breaking. If glass is dropped or sustains an impact, examine for cracking, chipping and weakness before use. Do not expose hot glass parts to cold water or extreme temperature change as this may result in cracking/breaking. Product contains electrical and delicate parts — do not drop. If damaged do not operate. To protect/prevent against electric shock/fire never immerse or operate the product in or around any water/liquids. Do not stick or pour anything in the unit or place near flammable material. Do not store/operate/expose the unit and contents to extreme temperatures. Do not open the unit – doing so may cause electric shock and voids warranty.
Do not leave the unit turned on and left unattended.
The information contained in this manual is an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficacy or use of its preparation. This information is not intended in any way to replace or supersede professional consultations. The information contained herein is for instructional and cautionary purposes only. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition, or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device, use unit only for its intended use.
Safety Certifications
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
Limitation of Liability (Read before use)
Failure to read or follow instructions, improper or careless use may lead to personal injury. Arizer and affiliated companies will not assume any liability for injury or damage resulting from the use or misuse of this device. Due to the fragility and nature of glass Arizer and affiliated companies are not responsible for cuts or injuries sustained from breakage. Arizer and affiliated companies are not liable for injuries or burns associated from touching hot parts. Arizer and affiliated companies are not liable for failures to comply with these warnings and safety guidelines. By purchasing this product, the buyer assumes all risks associated with lithium batteries. If you do not agree with these conditions return the product immediately before use. This product is intended for use with the botanicals described herein — Arizer and affiliated companies are not liable for use with other than those botanicals described herein. Company’s liabilities for damages in connection with the product and its parts shall not exceed the purchase price of the product.
IMPORTANT – Obey local laws. Not all essential oils, botanicals and herbs are legal for use in every Country or State. Check your Local, State, Federal and Importation laws before ordering botanicals. This device is meant for legal use only.
Battery Safety & Warnings (Read before use)
Lithium batteries are volatile. Failure to read and follow these instructions may result in fire, personal injury and damage to property if charged or used improperly.
- Always handle your device and batteries with care – never drop the batteries or device.
- Fully charge your Arizer Solo II before first use.
- Arizer Solo II Batteries and Chargers are manufactured to strict quality standards, specifically for use with the Solo II.
- Only use official Solo II Batteries & Chargers. Do not use any third-party, counterfeit, or unknown brand batteries or chargers.
- Lithium batteries can explode or cause a fire if they are used incorrectly, if they are defective, or tampered with. Do not tamper with or misuse the Arizer Solo II Battery, and do not use damaged/defective batteries or Solo II devices.
- Arizer Solo II should be stored in a safe, temperature controlled, cool, dry place. Do not store in extreme temperature environments. Extreme heat or cold can damage the device and/or battery.
- Do not store your Solo II with a fully charged or fully drained battery for extended periods of time (one month or longer). If storing for long periods, store with the battery at 50% capacity.
Never throw away the Solo II or Solo II Batteries, and never put Solo II Batteries in a battery collection box. If you have dropped the device or notice physical damage you should take the following steps:
- Place the device in a safe, dry place and leave it for at least one hour in case there is a short circuit, and the battery starts heating up.
- Check to see if the device has become hot. If so, leave the device until it has cooled off, and then dispose according to local laws and regulations.
Battery Performance
Arizer Batteries meet rigorous quality standards. With normal use they will last for hundreds of charge cycles before losing any capacity. Dropping the battery or the unit can result in battery damage that may limit / reduce the battery capacity quickly, so it is important to handle your unit carefully.
Battery Charge
Depending on the temperature setting and general usage patterns, the Solo II battery will typically last for 3 hours of use per charge. The battery will take 3 hours to fully charge, or longer if you use it while charging.
Use While Charging
If your battery is running low with the Solo II, you don’t have to wait for the battery to fully charge before you can use it. Just partially charge the battery (5-10 minutes) and then you can set the temperature and use the Solo II while the battery continues charging. Note: The Solo II will not operate if the battery is completely drained.
Battery Conservation
The Solo II and Solo II Chargers have built-in protections to prevent the battery from being overcharged or drained too low. To conserve battery life, use the Solo II in a temperature-controlled environment and use lower temperature settings. When outdoors, stay sheltered from the elements and avoid using in extremely cold temperatures. Charge the battery as necessary. Do not store the battery fully charged or fully drained for longer than one month (store with partial charge).
Battery Replacement
The Solo II Battery is a high-capacity, long life battery, and will last for a long time, even with prolonged / regular use. The Solo II Battery is covered under a limited 1-Year warranty and replacement service is available upon request . To inquire about replacing your Solo II Battery send us an email to: [email protected].
Safety Disclaimer
The Solo II Battery is not user replaceable. Arizer Batteries should not be substituted with third-party batteries — Only official Solo II Batteries should be used with the Arizer Solo II. We cannot verify the quality or safety of other batteries, and using third-party batteries can result in personal injury, electric shock, and damage to the device which is not covered under warranty.
If you experience an issue with your Solo II send an email to [email protected] and an expert Arizer customer service representative will reply as soon as possible to troubleshoot and determine the best way to resolve any issues. To help expedite your service request please include a description of the problem, your full name, your shipping address, the serial number on the bottom of your device, and a copy of your sales receipt.
Solo II Support
- 1 x Solo II Portable Micro-Heater
- 1 x Solo II Charger / Power Adapter
- 1 x Solo II Glass Aroma Tube (90mm)
- 1 x Solo II Glass Aroma Tube (110mm)
- 1 x Solo II Glass Aroma Dish
- 1 x Solo II PVC Travel Tube w/Cap (90mm Size)
- 1 x Solo II PVC Travel Tube w/Cap (110mm Size)
- 1 x Solo II PVC Travel Tube w/Cap Aroma Dish Size
- 1 x Solo II Belt-Clip Carry Case
- 2 x Solo II Silicone Stem Caps
- 4 x Solo II Stainless Steel Filter Screens
- 1 x Stainless Steel Stirring Tool
- 1 x Solo II Owner’s Manual
Arizer Batteries meet rigorous quality standards. With normal use they will last for hundreds of charge cycles before losing any capacity. Dropping the battery or the unit can result in battery damage that may limit / reduce the battery capacity quickly, so it is important to handle your unit carefully.
Battery Charge
Depending on the temperature setting and general usage patterns the Solo II battery will typically last for 3 hours of use per charge. The battery will take 3 hours to fully charge, or longer if you use it while charging.
Use While Charging
If your battery is running low, with the Solo II you don’t have to wait for the battery to fully charge before you can use it. Just partially charge the battery (5-10 minutes) and then you can set the temperature and use the Solo II while the battery continues charging. Note: The Solo II will not operate if the battery is completely drained.
Battery Conservation
The Solo II and Solo II Chargers have built-in protections to prevent the battery from being overcharged or drained too low. To conserve battery life, use the Solo II in a temperature-controlled environment and use lower temperature settings. When outdoors, stay sheltered from the elements and avoid using in extremely cold temperatures. Charge the battery as necessary. Do not store the Solo II with the battery fully charged or fully drained for longer than one month (store with partial charge).
The Control Panel consists of the OLED and three buttons: the Menu (M) button, and the Up & Down arrow buttons. Use the Menu button to navigate through the different settings and the Up & Down buttons to adjust them.
Temperature Settings
The Solo II optimized heating system warms up fast and has a wide temperature range of 50° C – 220° C (122° F – 428° F). The temperature is adjustable in 1-degree increments and 10-degree increments.
Audio / Beep
The Audio / Beep function has three volume settings and can be turned on and off. If the Audio / Beep is activated, a beep will be heard when the Solo II is powered on or off. If the Audio / Beep is deactivated, the Solo II remains silent when powered on or off.
Power-On Delay
The power-on delay safety feature ensures you don’t accidentally turn on the unit and has three settings for your convenience: 4 Seconds, 6 Seconds, and 8 Seconds. The default setting is 6 seconds.
Automatic Shut-Off Timer
The automatic shut-off timer safety feature ensures you don’t forget to turn off the unit and helps conserve battery life. The shut-off timer can be adjusted between 5 – 15 minutes in one-minute increments. The default setting is 10-minutes.
Celsius or Fahrenheit
The Solo II display can be set to Celsius or Fahrenheit. The default setting is Celsius.
Display Brightness
The Solo II display has three brightness settings: low, medium, and high. The default setting is medium.
A full range of parts and accessories to equip and protect your Solo II are available for purchase here.
If you can’t find the part you need send us an email at: [email protected] with a description of the part you need.
Note: Metal screens are included and available for your convenience but they make vapor harsh and diminish the flavors. The Solo Glass Aroma Tubes have a built-in screen to keep vapor pure and flavorful so we recommend using whole or coarsely ground botanicals with no metal screen for smooth and tasty vapor.
The Solo II is compact, lightweight, and completely portable, conveniently fitting in the palm of your hand, pocket, or purse.
- Weight: 210 grams
- Length: 46 mm
- Width: 35 mm
- Height: 113 mm
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
The Solo II carries a lifetime warranty on the heating element, a limited 2-Year warranty covering defects in materials or workmanship, and a 1-Year limited warranty covering the battery. Glass is not covered under warranty. Retain proof of purchase for warranty service. Returning the product and costs incurred are the responsibility of the user. Arizer will repair or replace warrantied items at our discretion. The warranty does not cover units damaged by dropping, tampering, unauthorized service performed or attempted, modifying the unit, misuse or abuse.
Cautions, Disclaimers and Warnings (Read Before Use)
First Time Use – Examine box contents to ensure all included parts are in good condition, not damaged from shipping. Check glass parts for cracks or breakage. Packaging materials, bags, & small parts may pose a choking hazard. Keep out of reach/use from children, minors, and pets. Glass Aroma Tubes may fit tightly in the unit at first. If you are finding it difficult to insert a Glass Aroma Tube, turn on the Solo II, set the temperature to 200° C, and let the unit heat for 1-2 minutes then try again. To burn off any residues from packaging, turn on the unit, set the temperature to 220° C, and let the unit heat for 5 – 10 minutes.
Warning – Hot Parts – Handle hot parts and glass parts with care. Do not place hot parts on non-heat safe surfaces. Carefully attach protective heat-rated silicone caps to safely cover hot end of glass parts. Allow heating unit and hot parts to cool before placing in purse, pocket, or any container where damage from hot parts can occur. Parts are made from strong scientific quality borosilicate glass, but all borosilicate glass is breakable so handle with care and caution. Avoid tapping on hard surfaces to prevent cracking and breaking. If glass is dropped or sustains an impact, examine for cracking, chipping and weakness before use. Do not expose hot glass parts to cold water or extreme temperature change as this may result in cracking/breaking. Product contains electrical and delicate parts — do not drop. If damaged do not operate. To protect/prevent against electric shock/fire never immerse or operate the product in or around any water/liquids. Do not stick or pour anything in the unit or place near flammable material. Do not store/operate/expose the unit and contents to extreme temperatures. Do not open the unit – doing so may cause electric shock and voids warranty.
Do not leave the unit turned on and left unattended.
The information contained in this manual is an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficacy or use of its preparation. This information is not intended in any way to replace or supersede professional consultations. The information contained herein is for instructional and cautionary purposes only. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition, or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device, use unit only for its intended use.
Safety Certifications
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
Limitation of Liability (Read before use)
Failure to read or follow instructions, improper or careless use may lead to personal injury. Arizer and affiliated companies will not assume any liability for injury or damage resulting from the use or misuse of this device. Due to the fragility and nature of glass Arizer and affiliated companies are not responsible for cuts or injuries sustained from breakage. Arizer and affiliated companies are not liable for injuries or burns associated from touching hot parts. Arizer and affiliated companies are not liable for failures to comply with these warnings and safety guidelines. By purchasing this product, the buyer assumes all risks associated with lithium batteries. If you do not agree with these conditions return the product immediately before use. This product is intended for use with the botanicals described herein — Arizer and affiliated companies are not liable for use with other than those botanicals described herein. Company’s liabilities for damages in connection with the product and its parts shall not exceed the purchase price of the product.
IMPORTANT – Obey local laws. Not all essential oils, botanicals and herbs are legal for use in every Country or State. Check your Local, State, Federal and Importation laws before ordering botanicals. This device is meant for legal use only.
Battery Safety & Warnings (Read before use)
Lithium batteries are volatile. Failure to read and follow these instructions may result in fire, personal injury and damage to property if charged or used improperly.
- Always handle your device and batteries with care – never drop the batteries or device.
- Fully charge your Arizer Solo II before first use.
- Arizer Solo II Batteries and Chargers are manufactured to strict quality standards, specifically for use with the Solo II.
- Only use official Solo II Batteries & Chargers. Do not use any third-party, counterfeit, or unknown brand batteries or chargers.
- Lithium batteries can explode or cause a fire if they are used incorrectly, if they are defective, or tampered with. Do not tamper with or misuse the Arizer Solo II Battery, and do not use damaged/defective batteries or Solo II devices.
- Arizer Solo II should be stored in a safe, temperature controlled, cool, dry place. Do not store in extreme temperature environments. Extreme heat or cold can damage the device and/or battery.
- Do not store your Solo II with a fully charged or fully drained battery for extended periods of time (one month or longer). If storing for long periods, store with the battery at 50% capacity.
Never throw away the Solo II or Solo II Batteries, and never put Solo II Batteries in a battery collection box. If you have dropped the device or notice physical damage you should take the following steps:
- Place the device in a safe, dry place and leave it for at least one hour in case there is a short circuit, and the battery starts heating up.
- Check to see if the device has become hot. If so, leave the device until it has cooled off, and then dispose according to local laws and regulations.
Battery Performance
Arizer Batteries meet rigorous quality standards. With normal use they will last for hundreds of charge cycles before losing any capacity. Dropping the battery or the unit can result in battery damage that may limit / reduce the battery capacity quickly, so it is important to handle your unit carefully.
Battery Charge
Depending on the temperature setting and general usage patterns, the Solo II battery will typically last for 3 hours of use per charge. The battery will take 3 hours to fully charge, or longer if you use it while charging.
Use While Charging
If your battery is running low with the Solo II, you don’t have to wait for the battery to fully charge before you can use it. Just partially charge the battery (5-10 minutes) and then you can set the temperature and use the Solo II while the battery continues charging. Note: The Solo II will not operate if the battery is completely drained.
Battery Conservation
The Solo II and Solo II Chargers have built-in protections to prevent the battery from being overcharged or drained too low. To conserve battery life, use the Solo II in a temperature-controlled environment and use lower temperature settings. When outdoors, stay sheltered from the elements and avoid using in extremely cold temperatures. Charge the battery as necessary. Do not store the battery fully charged or fully drained for longer than one month (store with partial charge).
Battery Replacement
The Solo II Battery is a high-capacity, long life battery, and will last for a long time, even with prolonged / regular use. The Solo II Battery is covered under a limited 1-Year warranty and replacement service is available upon request . To inquire about replacing your Solo II Battery send us an email to: [email protected].
Safety Disclaimer
The Solo II Battery is not user replaceable. Arizer Batteries should not be substituted with third-party batteries — Only official Solo II Batteries should be used with the Arizer Solo II. We cannot verify the quality or safety of other batteries, and using third-party batteries can result in personal injury, electric shock, and damage to the device which is not covered under warranty.
If you experience an issue with your Solo II send an email to [email protected] and an expert Arizer customer service representative will reply as soon as possible to troubleshoot and determine the best way to resolve any issues. To help expedite your service request please include a description of the problem, your full name, your shipping address, the serial number on the bottom of your device, and a copy of your sales receipt.
Solo II Support
- 1 x Solo II Portable Micro-Heater
- 1 x Solo II Charger / Power Adapter
- 1 x Solo II Glass Aroma Tube (90mm)
- 1 x Solo II Glass Aroma Tube (110mm)
- 1 x Solo II Glass Aroma Dish
- 1 x Solo II PVC Travel Tube w/Cap (90mm Size)
- 1 x Solo II PVC Travel Tube w/Cap (110mm Size)
- 1 x Solo II PVC Travel Tube w/Cap Aroma Dish Size
- 1 x Solo II Belt-Clip Carry Case
- 2 x Solo II Silicone Stem Caps
- 4 x Solo II Stainless Steel Filter Screens
- 1 x Stainless Steel Stirring Tool
- 1 x Solo II Owner’s Manual
Arizer Batteries meet rigorous quality standards. With normal use they will last for hundreds of charge cycles before losing any capacity. Dropping the battery or the unit can result in battery damage that may limit / reduce the battery capacity quickly, so it is important to handle your unit carefully.
Battery Charge
Depending on the temperature setting and general usage patterns the Solo II battery will typically last for 3 hours of use per charge. The battery will take 3 hours to fully charge, or longer if you use it while charging.
Use While Charging
If your battery is running low, with the Solo II you don’t have to wait for the battery to fully charge before you can use it. Just partially charge the battery (5-10 minutes) and then you can set the temperature and use the Solo II while the battery continues charging. Note: The Solo II will not operate if the battery is completely drained.
Battery Conservation
The Solo II and Solo II Chargers have built-in protections to prevent the battery from being overcharged or drained too low. To conserve battery life, use the Solo II in a temperature-controlled environment and use lower temperature settings. When outdoors, stay sheltered from the elements and avoid using in extremely cold temperatures. Charge the battery as necessary. Do not store the Solo II with the battery fully charged or fully drained for longer than one month (store with partial charge).
The Control Panel consists of the OLED and three buttons: the Menu (M) button, and the Up & Down arrow buttons. Use the Menu button to navigate through the different settings and the Up & Down buttons to adjust them.
Temperature Settings
The Solo II optimized heating system warms up fast and has a wide temperature range of 50° C – 220° C (122° F – 428° F). The temperature is adjustable in 1-degree increments and 10-degree increments.
Audio / Beep
The Audio / Beep function has three volume settings and can be turned on and off. If the Audio / Beep is activated, a beep will be heard when the Solo II is powered on or off. If the Audio / Beep is deactivated, the Solo II remains silent when powered on or off.
Power-On Delay
The power-on delay safety feature ensures you don’t accidentally turn on the unit and has three settings for your convenience: 4 Seconds, 6 Seconds, and 8 Seconds. The default setting is 6 seconds.
Automatic Shut-Off Timer
The automatic shut-off timer safety feature ensures you don’t forget to turn off the unit and helps conserve battery life. The shut-off timer can be adjusted between 5 – 15 minutes in one-minute increments. The default setting is 10-minutes.
Celsius or Fahrenheit
The Solo II display can be set to Celsius or Fahrenheit. The default setting is Celsius.
Display Brightness
The Solo II display has three brightness settings: low, medium, and high. The default setting is medium.
A full range of parts and accessories to equip and protect your Solo II are available for purchase here.
If you can’t find the part you need send us an email at: [email protected] with a description of the part you need.
Note: Metal screens are included and available for your convenience but they make vapor harsh and diminish the flavors. The Solo Glass Aroma Tubes have a built-in screen to keep vapor pure and flavorful so we recommend using whole or coarsely ground botanicals with no metal screen for smooth and tasty vapor.
The Solo II is compact, lightweight, and completely portable, conveniently fitting in the palm of your hand, pocket, or purse.
- Weight: 210 grams
- Length: 46 mm
- Width: 35 mm
- Height: 113 mm
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
The Solo II carries a lifetime warranty on the heating element, a limited 2-Year warranty covering defects in materials or workmanship, and a 1-Year limited warranty covering the battery. Glass is not covered under warranty. Retain proof of purchase for warranty service. Returning the product and costs incurred are the responsibility of the user. Arizer will repair or replace warrantied items at our discretion. The warranty does not cover units damaged by dropping, tampering, unauthorized service performed or attempted, modifying the unit, misuse or abuse.
Cautions, Disclaimers and Warnings (Read Before Use)
First Time Use – Examine box contents to ensure all included parts are in good condition, not damaged from shipping. Check glass parts for cracks or breakage. Packaging materials, bags, & small parts may pose a choking hazard. Keep out of reach/use from children, minors, and pets. Glass Aroma Tubes may fit tightly in the unit at first. If you are finding it difficult to insert a Glass Aroma Tube, turn on the Solo II, set the temperature to 200° C, and let the unit heat for 1-2 minutes then try again. To burn off any residues from packaging, turn on the unit, set the temperature to 220° C, and let the unit heat for 5 – 10 minutes.
Warning – Hot Parts – Handle hot parts and glass parts with care. Do not place hot parts on non-heat safe surfaces. Carefully attach protective heat-rated silicone caps to safely cover hot end of glass parts. Allow heating unit and hot parts to cool before placing in purse, pocket, or any container where damage from hot parts can occur. Parts are made from strong scientific quality borosilicate glass, but all borosilicate glass is breakable so handle with care and caution. Avoid tapping on hard surfaces to prevent cracking and breaking. If glass is dropped or sustains an impact, examine for cracking, chipping and weakness before use. Do not expose hot glass parts to cold water or extreme temperature change as this may result in cracking/breaking. Product contains electrical and delicate parts — do not drop. If damaged do not operate. To protect/prevent against electric shock/fire never immerse or operate the product in or around any water/liquids. Do not stick or pour anything in the unit or place near flammable material. Do not store/operate/expose the unit and contents to extreme temperatures. Do not open the unit – doing so may cause electric shock and voids warranty.
Do not leave the unit turned on and left unattended.
The information contained in this manual is an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficacy or use of its preparation. This information is not intended in any way to replace or supersede professional consultations. The information contained herein is for instructional and cautionary purposes only. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition, or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device, use unit only for its intended use.
Safety Certifications
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
Limitation of Liability (Read before use)
Failure to read or follow instructions, improper or careless use may lead to personal injury. Arizer and affiliated companies will not assume any liability for injury or damage resulting from the use or misuse of this device. Due to the fragility and nature of glass Arizer and affiliated companies are not responsible for cuts or injuries sustained from breakage. Arizer and affiliated companies are not liable for injuries or burns associated from touching hot parts. Arizer and affiliated companies are not liable for failures to comply with these warnings and safety guidelines. By purchasing this product, the buyer assumes all risks associated with lithium batteries. If you do not agree with these conditions return the product immediately before use. This product is intended for use with the botanicals described herein — Arizer and affiliated companies are not liable for use with other than those botanicals described herein. Company’s liabilities for damages in connection with the product and its parts shall not exceed the purchase price of the product.
IMPORTANT – Obey local laws. Not all essential oils, botanicals and herbs are legal for use in every Country or State. Check your Local, State, Federal and Importation laws before ordering botanicals. This device is meant for legal use only.
Battery Safety & Warnings (Read before use)
Lithium batteries are volatile. Failure to read and follow these instructions may result in fire, personal injury and damage to property if charged or used improperly.
- Always handle your device and batteries with care – never drop the batteries or device.
- Fully charge your Arizer Solo II before first use.
- Arizer Solo II Batteries and Chargers are manufactured to strict quality standards, specifically for use with the Solo II.
- Only use official Solo II Batteries & Chargers. Do not use any third-party, counterfeit, or unknown brand batteries or chargers.
- Lithium batteries can explode or cause a fire if they are used incorrectly, if they are defective, or tampered with. Do not tamper with or misuse the Arizer Solo II Battery, and do not use damaged/defective batteries or Solo II devices.
- Arizer Solo II should be stored in a safe, temperature controlled, cool, dry place. Do not store in extreme temperature environments. Extreme heat or cold can damage the device and/or battery.
- Do not store your Solo II with a fully charged or fully drained battery for extended periods of time (one month or longer). If storing for long periods, store with the battery at 50% capacity.
Never throw away the Solo II or Solo II Batteries, and never put Solo II Batteries in a battery collection box. If you have dropped the device or notice physical damage you should take the following steps:
- Place the device in a safe, dry place and leave it for at least one hour in case there is a short circuit, and the battery starts heating up.
- Check to see if the device has become hot. If so, leave the device until it has cooled off, and then dispose according to local laws and regulations.
Battery Performance
Arizer Batteries meet rigorous quality standards. With normal use they will last for hundreds of charge cycles before losing any capacity. Dropping the battery or the unit can result in battery damage that may limit / reduce the battery capacity quickly, so it is important to handle your unit carefully.
Battery Charge
Depending on the temperature setting and general usage patterns, the Solo II battery will typically last for 3 hours of use per charge. The battery will take 3 hours to fully charge, or longer if you use it while charging.
Use While Charging
If your battery is running low with the Solo II, you don’t have to wait for the battery to fully charge before you can use it. Just partially charge the battery (5-10 minutes) and then you can set the temperature and use the Solo II while the battery continues charging. Note: The Solo II will not operate if the battery is completely drained.
Battery Conservation
The Solo II and Solo II Chargers have built-in protections to prevent the battery from being overcharged or drained too low. To conserve battery life, use the Solo II in a temperature-controlled environment and use lower temperature settings. When outdoors, stay sheltered from the elements and avoid using in extremely cold temperatures. Charge the battery as necessary. Do not store the battery fully charged or fully drained for longer than one month (store with partial charge).
Battery Replacement
The Solo II Battery is a high-capacity, long life battery, and will last for a long time, even with prolonged / regular use. The Solo II Battery is covered under a limited 1-Year warranty and replacement service is available upon request . To inquire about replacing your Solo II Battery send us an email to: [email protected].
Safety Disclaimer
The Solo II Battery is not user replaceable. Arizer Batteries should not be substituted with third-party batteries — Only official Solo II Batteries should be used with the Arizer Solo II. We cannot verify the quality or safety of other batteries, and using third-party batteries can result in personal injury, electric shock, and damage to the device which is not covered under warranty.
If you experience an issue with your Solo II send an email to [email protected] and an expert Arizer customer service representative will reply as soon as possible to troubleshoot and determine the best way to resolve any issues. To help expedite your service request please include a description of the problem, your full name, your shipping address, the serial number on the bottom of your device, and a copy of your sales receipt.
Solo II Support
- 1 x Solo II Portable Micro-Heater
- 1 x Solo II Charger / Power Adapter
- 1 x Solo II Glass Aroma Tube (90mm)
- 1 x Solo II Glass Aroma Tube (110mm)
- 1 x Solo II Glass Aroma Dish
- 1 x Solo II PVC Travel Tube w/Cap (90mm Size)
- 1 x Solo II PVC Travel Tube w/Cap (110mm Size)
- 1 x Solo II PVC Travel Tube w/Cap Aroma Dish Size
- 1 x Solo II Belt-Clip Carry Case
- 2 x Solo II Silicone Stem Caps
- 4 x Solo II Stainless Steel Filter Screens
- 1 x Stainless Steel Stirring Tool
- 1 x Solo II Owner’s Manual
Arizer Batteries meet rigorous quality standards. With normal use they will last for hundreds of charge cycles before losing any capacity. Dropping the battery or the unit can result in battery damage that may limit / reduce the battery capacity quickly, so it is important to handle your unit carefully.
Battery Charge
Depending on the temperature setting and general usage patterns the Solo II battery will typically last for 3 hours of use per charge. The battery will take 3 hours to fully charge, or longer if you use it while charging.
Use While Charging
If your battery is running low, with the Solo II you don’t have to wait for the battery to fully charge before you can use it. Just partially charge the battery (5-10 minutes) and then you can set the temperature and use the Solo II while the battery continues charging. Note: The Solo II will not operate if the battery is completely drained.
Battery Conservation
The Solo II and Solo II Chargers have built-in protections to prevent the battery from being overcharged or drained too low. To conserve battery life, use the Solo II in a temperature-controlled environment and use lower temperature settings. When outdoors, stay sheltered from the elements and avoid using in extremely cold temperatures. Charge the battery as necessary. Do not store the Solo II with the battery fully charged or fully drained for longer than one month (store with partial charge).
The Control Panel consists of the OLED and three buttons: the Menu (M) button, and the Up & Down arrow buttons. Use the Menu button to navigate through the different settings and the Up & Down buttons to adjust them.
Temperature Settings
The Solo II optimized heating system warms up fast and has a wide temperature range of 50° C – 220° C (122° F – 428° F). The temperature is adjustable in 1-degree increments and 10-degree increments.
Audio / Beep
The Audio / Beep function has three volume settings and can be turned on and off. If the Audio / Beep is activated, a beep will be heard when the Solo II is powered on or off. If the Audio / Beep is deactivated, the Solo II remains silent when powered on or off.
Power-On Delay
The power-on delay safety feature ensures you don’t accidentally turn on the unit and has three settings for your convenience: 4 Seconds, 6 Seconds, and 8 Seconds. The default setting is 6 seconds.
Automatic Shut-Off Timer
The automatic shut-off timer safety feature ensures you don’t forget to turn off the unit and helps conserve battery life. The shut-off timer can be adjusted between 5 – 15 minutes in one-minute increments. The default setting is 10-minutes.
Celsius or Fahrenheit
The Solo II display can be set to Celsius or Fahrenheit. The default setting is Celsius.
Display Brightness
The Solo II display has three brightness settings: low, medium, and high. The default setting is medium.
A full range of parts and accessories to equip and protect your Solo II are available for purchase here.
If you can’t find the part you need send us an email at: [email protected] with a description of the part you need.
Note: Metal screens are included and available for your convenience but they make vapor harsh and diminish the flavors. The Solo Glass Aroma Tubes have a built-in screen to keep vapor pure and flavorful so we recommend using whole or coarsely ground botanicals with no metal screen for smooth and tasty vapor.
The Solo II is compact, lightweight, and completely portable, conveniently fitting in the palm of your hand, pocket, or purse.
- Weight: 210 grams
- Length: 46 mm
- Width: 35 mm
- Height: 113 mm
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
The Solo II carries a lifetime warranty on the heating element, a limited 2-Year warranty covering defects in materials or workmanship, and a 1-Year limited warranty covering the battery. Glass is not covered under warranty. Retain proof of purchase for warranty service. Returning the product and costs incurred are the responsibility of the user. Arizer will repair or replace warrantied items at our discretion. The warranty does not cover units damaged by dropping, tampering, unauthorized service performed or attempted, modifying the unit, misuse or abuse.
Cautions, Disclaimers and Warnings (Read Before Use)
First Time Use – Examine box contents to ensure all included parts are in good condition, not damaged from shipping. Check glass parts for cracks or breakage. Packaging materials, bags, & small parts may pose a choking hazard. Keep out of reach/use from children, minors, and pets. Glass Aroma Tubes may fit tightly in the unit at first. If you are finding it difficult to insert a Glass Aroma Tube, turn on the Solo II, set the temperature to 200° C, and let the unit heat for 1-2 minutes then try again. To burn off any residues from packaging, turn on the unit, set the temperature to 220° C, and let the unit heat for 5 – 10 minutes.
Warning – Hot Parts – Handle hot parts and glass parts with care. Do not place hot parts on non-heat safe surfaces. Carefully attach protective heat-rated silicone caps to safely cover hot end of glass parts. Allow heating unit and hot parts to cool before placing in purse, pocket, or any container where damage from hot parts can occur. Parts are made from strong scientific quality borosilicate glass, but all borosilicate glass is breakable so handle with care and caution. Avoid tapping on hard surfaces to prevent cracking and breaking. If glass is dropped or sustains an impact, examine for cracking, chipping and weakness before use. Do not expose hot glass parts to cold water or extreme temperature change as this may result in cracking/breaking. Product contains electrical and delicate parts — do not drop. If damaged do not operate. To protect/prevent against electric shock/fire never immerse or operate the product in or around any water/liquids. Do not stick or pour anything in the unit or place near flammable material. Do not store/operate/expose the unit and contents to extreme temperatures. Do not open the unit – doing so may cause electric shock and voids warranty.
Do not leave the unit turned on and left unattended.
The information contained in this manual is an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficacy or use of its preparation. This information is not intended in any way to replace or supersede professional consultations. The information contained herein is for instructional and cautionary purposes only. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition, or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device, use unit only for its intended use.
Safety Certifications
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
Limitation of Liability (Read before use)
Failure to read or follow instructions, improper or careless use may lead to personal injury. Arizer and affiliated companies will not assume any liability for injury or damage resulting from the use or misuse of this device. Due to the fragility and nature of glass Arizer and affiliated companies are not responsible for cuts or injuries sustained from breakage. Arizer and affiliated companies are not liable for injuries or burns associated from touching hot parts. Arizer and affiliated companies are not liable for failures to comply with these warnings and safety guidelines. By purchasing this product, the buyer assumes all risks associated with lithium batteries. If you do not agree with these conditions return the product immediately before use. This product is intended for use with the botanicals described herein — Arizer and affiliated companies are not liable for use with other than those botanicals described herein. Company’s liabilities for damages in connection with the product and its parts shall not exceed the purchase price of the product.
IMPORTANT – Obey local laws. Not all essential oils, botanicals and herbs are legal for use in every Country or State. Check your Local, State, Federal and Importation laws before ordering botanicals. This device is meant for legal use only.
Battery Safety & Warnings (Read before use)
Lithium batteries are volatile. Failure to read and follow these instructions may result in fire, personal injury and damage to property if charged or used improperly.
- Always handle your device and batteries with care – never drop the batteries or device.
- Fully charge your Arizer Solo II before first use.
- Arizer Solo II Batteries and Chargers are manufactured to strict quality standards, specifically for use with the Solo II.
- Only use official Solo II Batteries & Chargers. Do not use any third-party, counterfeit, or unknown brand batteries or chargers.
- Lithium batteries can explode or cause a fire if they are used incorrectly, if they are defective, or tampered with. Do not tamper with or misuse the Arizer Solo II Battery, and do not use damaged/defective batteries or Solo II devices.
- Arizer Solo II should be stored in a safe, temperature controlled, cool, dry place. Do not store in extreme temperature environments. Extreme heat or cold can damage the device and/or battery.
- Do not store your Solo II with a fully charged or fully drained battery for extended periods of time (one month or longer). If storing for long periods, store with the battery at 50% capacity.
Never throw away the Solo II or Solo II Batteries, and never put Solo II Batteries in a battery collection box. If you have dropped the device or notice physical damage you should take the following steps:
- Place the device in a safe, dry place and leave it for at least one hour in case there is a short circuit, and the battery starts heating up.
- Check to see if the device has become hot. If so, leave the device until it has cooled off, and then dispose according to local laws and regulations.
Battery Performance
Arizer Batteries meet rigorous quality standards. With normal use they will last for hundreds of charge cycles before losing any capacity. Dropping the battery or the unit can result in battery damage that may limit / reduce the battery capacity quickly, so it is important to handle your unit carefully.
Battery Charge
Depending on the temperature setting and general usage patterns, the Solo II battery will typically last for 3 hours of use per charge. The battery will take 3 hours to fully charge, or longer if you use it while charging.
Use While Charging
If your battery is running low with the Solo II, you don’t have to wait for the battery to fully charge before you can use it. Just partially charge the battery (5-10 minutes) and then you can set the temperature and use the Solo II while the battery continues charging. Note: The Solo II will not operate if the battery is completely drained.
Battery Conservation
The Solo II and Solo II Chargers have built-in protections to prevent the battery from being overcharged or drained too low. To conserve battery life, use the Solo II in a temperature-controlled environment and use lower temperature settings. When outdoors, stay sheltered from the elements and avoid using in extremely cold temperatures. Charge the battery as necessary. Do not store the battery fully charged or fully drained for longer than one month (store with partial charge).
Battery Replacement
The Solo II Battery is a high-capacity, long life battery, and will last for a long time, even with prolonged / regular use. The Solo II Battery is covered under a limited 1-Year warranty and replacement service is available upon request . To inquire about replacing your Solo II Battery send us an email to: [email protected].
Safety Disclaimer
The Solo II Battery is not user replaceable. Arizer Batteries should not be substituted with third-party batteries — Only official Solo II Batteries should be used with the Arizer Solo II. We cannot verify the quality or safety of other batteries, and using third-party batteries can result in personal injury, electric shock, and damage to the device which is not covered under warranty.
If you experience an issue with your Solo II send an email to [email protected] and an expert Arizer customer service representative will reply as soon as possible to troubleshoot and determine the best way to resolve any issues. To help expedite your service request please include a description of the problem, your full name, your shipping address, the serial number on the bottom of your device, and a copy of your sales receipt.
Solo II Support
- 1 x Solo II Portable Micro-Heater
- 1 x Solo II Charger / Power Adapter
- 1 x Solo II Glass Aroma Tube (90mm)
- 1 x Solo II Glass Aroma Tube (110mm)
- 1 x Solo II Glass Aroma Dish
- 1 x Solo II PVC Travel Tube w/Cap (90mm Size)
- 1 x Solo II PVC Travel Tube w/Cap (110mm Size)
- 1 x Solo II PVC Travel Tube w/Cap Aroma Dish Size
- 1 x Solo II Belt-Clip Carry Case
- 2 x Solo II Silicone Stem Caps
- 4 x Solo II Stainless Steel Filter Screens
- 1 x Stainless Steel Stirring Tool
- 1 x Solo II Owner’s Manual
Arizer Batteries meet rigorous quality standards. With normal use they will last for hundreds of charge cycles before losing any capacity. Dropping the battery or the unit can result in battery damage that may limit / reduce the battery capacity quickly, so it is important to handle your unit carefully.
Battery Charge
Depending on the temperature setting and general usage patterns the Solo II battery will typically last for 3 hours of use per charge. The battery will take 3 hours to fully charge, or longer if you use it while charging.
Use While Charging
If your battery is running low, with the Solo II you don’t have to wait for the battery to fully charge before you can use it. Just partially charge the battery (5-10 minutes) and then you can set the temperature and use the Solo II while the battery continues charging. Note: The Solo II will not operate if the battery is completely drained.
Battery Conservation
The Solo II and Solo II Chargers have built-in protections to prevent the battery from being overcharged or drained too low. To conserve battery life, use the Solo II in a temperature-controlled environment and use lower temperature settings. When outdoors, stay sheltered from the elements and avoid using in extremely cold temperatures. Charge the battery as necessary. Do not store the Solo II with the battery fully charged or fully drained for longer than one month (store with partial charge).
The Control Panel consists of the OLED and three buttons: the Menu (M) button, and the Up & Down arrow buttons. Use the Menu button to navigate through the different settings and the Up & Down buttons to adjust them.
Temperature Settings
The Solo II optimized heating system warms up fast and has a wide temperature range of 50° C – 220° C (122° F – 428° F). The temperature is adjustable in 1-degree increments and 10-degree increments.
Audio / Beep
The Audio / Beep function has three volume settings and can be turned on and off. If the Audio / Beep is activated, a beep will be heard when the Solo II is powered on or off. If the Audio / Beep is deactivated, the Solo II remains silent when powered on or off.
Power-On Delay
The power-on delay safety feature ensures you don’t accidentally turn on the unit and has three settings for your convenience: 4 Seconds, 6 Seconds, and 8 Seconds. The default setting is 6 seconds.
Automatic Shut-Off Timer
The automatic shut-off timer safety feature ensures you don’t forget to turn off the unit and helps conserve battery life. The shut-off timer can be adjusted between 5 – 15 minutes in one-minute increments. The default setting is 10-minutes.
Celsius or Fahrenheit
The Solo II display can be set to Celsius or Fahrenheit. The default setting is Celsius.
Display Brightness
The Solo II display has three brightness settings: low, medium, and high. The default setting is medium.
A full range of parts and accessories to equip and protect your Solo II are available for purchase here.
If you can’t find the part you need send us an email at: [email protected] with a description of the part you need.
Note: Metal screens are included and available for your convenience but they make vapor harsh and diminish the flavors. The Solo Glass Aroma Tubes have a built-in screen to keep vapor pure and flavorful so we recommend using whole or coarsely ground botanicals with no metal screen for smooth and tasty vapor.
The Solo II is compact, lightweight, and completely portable, conveniently fitting in the palm of your hand, pocket, or purse.
- Weight: 210 grams
- Length: 46 mm
- Width: 35 mm
- Height: 113 mm
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
The Solo II carries a lifetime warranty on the heating element, a limited 2-Year warranty covering defects in materials or workmanship, and a 1-Year limited warranty covering the battery. Glass is not covered under warranty. Retain proof of purchase for warranty service. Returning the product and costs incurred are the responsibility of the user. Arizer will repair or replace warrantied items at our discretion. The warranty does not cover units damaged by dropping, tampering, unauthorized service performed or attempted, modifying the unit, misuse or abuse.
Cautions, Disclaimers and Warnings (Read Before Use)
First Time Use – Examine box contents to ensure all included parts are in good condition, not damaged from shipping. Check glass parts for cracks or breakage. Packaging materials, bags, & small parts may pose a choking hazard. Keep out of reach/use from children, minors, and pets. Glass Aroma Tubes may fit tightly in the unit at first. If you are finding it difficult to insert a Glass Aroma Tube, turn on the Solo II, set the temperature to 200° C, and let the unit heat for 1-2 minutes then try again. To burn off any residues from packaging, turn on the unit, set the temperature to 220° C, and let the unit heat for 5 – 10 minutes.
Warning – Hot Parts – Handle hot parts and glass parts with care. Do not place hot parts on non-heat safe surfaces. Carefully attach protective heat-rated silicone caps to safely cover hot end of glass parts. Allow heating unit and hot parts to cool before placing in purse, pocket, or any container where damage from hot parts can occur. Parts are made from strong scientific quality borosilicate glass, but all borosilicate glass is breakable so handle with care and caution. Avoid tapping on hard surfaces to prevent cracking and breaking. If glass is dropped or sustains an impact, examine for cracking, chipping and weakness before use. Do not expose hot glass parts to cold water or extreme temperature change as this may result in cracking/breaking. Product contains electrical and delicate parts — do not drop. If damaged do not operate. To protect/prevent against electric shock/fire never immerse or operate the product in or around any water/liquids. Do not stick or pour anything in the unit or place near flammable material. Do not store/operate/expose the unit and contents to extreme temperatures. Do not open the unit – doing so may cause electric shock and voids warranty.
Do not leave the unit turned on and left unattended.
The information contained in this manual is an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficacy or use of its preparation. This information is not intended in any way to replace or supersede professional consultations. The information contained herein is for instructional and cautionary purposes only. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition, or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device, use unit only for its intended use.
Safety Certifications
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
Limitation of Liability (Read before use)
Failure to read or follow instructions, improper or careless use may lead to personal injury. Arizer and affiliated companies will not assume any liability for injury or damage resulting from the use or misuse of this device. Due to the fragility and nature of glass Arizer and affiliated companies are not responsible for cuts or injuries sustained from breakage. Arizer and affiliated companies are not liable for injuries or burns associated from touching hot parts. Arizer and affiliated companies are not liable for failures to comply with these warnings and safety guidelines. By purchasing this product, the buyer assumes all risks associated with lithium batteries. If you do not agree with these conditions return the product immediately before use. This product is intended for use with the botanicals described herein — Arizer and affiliated companies are not liable for use with other than those botanicals described herein. Company’s liabilities for damages in connection with the product and its parts shall not exceed the purchase price of the product.
IMPORTANT – Obey local laws. Not all essential oils, botanicals and herbs are legal for use in every Country or State. Check your Local, State, Federal and Importation laws before ordering botanicals. This device is meant for legal use only.
Battery Safety & Warnings (Read before use)
Lithium batteries are volatile. Failure to read and follow these instructions may result in fire, personal injury and damage to property if charged or used improperly.
- Always handle your device and batteries with care – never drop the batteries or device.
- Fully charge your Arizer Solo II before first use.
- Arizer Solo II Batteries and Chargers are manufactured to strict quality standards, specifically for use with the Solo II.
- Only use official Solo II Batteries & Chargers. Do not use any third-party, counterfeit, or unknown brand batteries or chargers.
- Lithium batteries can explode or cause a fire if they are used incorrectly, if they are defective, or tampered with. Do not tamper with or misuse the Arizer Solo II Battery, and do not use damaged/defective batteries or Solo II devices.
- Arizer Solo II should be stored in a safe, temperature controlled, cool, dry place. Do not store in extreme temperature environments. Extreme heat or cold can damage the device and/or battery.
- Do not store your Solo II with a fully charged or fully drained battery for extended periods of time (one month or longer). If storing for long periods, store with the battery at 50% capacity.
Never throw away the Solo II or Solo II Batteries, and never put Solo II Batteries in a battery collection box. If you have dropped the device or notice physical damage you should take the following steps:
- Place the device in a safe, dry place and leave it for at least one hour in case there is a short circuit, and the battery starts heating up.
- Check to see if the device has become hot. If so, leave the device until it has cooled off, and then dispose according to local laws and regulations.
Battery Performance
Arizer Batteries meet rigorous quality standards. With normal use they will last for hundreds of charge cycles before losing any capacity. Dropping the battery or the unit can result in battery damage that may limit / reduce the battery capacity quickly, so it is important to handle your unit carefully.
Battery Charge
Depending on the temperature setting and general usage patterns, the Solo II battery will typically last for 3 hours of use per charge. The battery will take 3 hours to fully charge, or longer if you use it while charging.
Use While Charging
If your battery is running low with the Solo II, you don’t have to wait for the battery to fully charge before you can use it. Just partially charge the battery (5-10 minutes) and then you can set the temperature and use the Solo II while the battery continues charging. Note: The Solo II will not operate if the battery is completely drained.
Battery Conservation
The Solo II and Solo II Chargers have built-in protections to prevent the battery from being overcharged or drained too low. To conserve battery life, use the Solo II in a temperature-controlled environment and use lower temperature settings. When outdoors, stay sheltered from the elements and avoid using in extremely cold temperatures. Charge the battery as necessary. Do not store the battery fully charged or fully drained for longer than one month (store with partial charge).
Battery Replacement
The Solo II Battery is a high-capacity, long life battery, and will last for a long time, even with prolonged / regular use. The Solo II Battery is covered under a limited 1-Year warranty and replacement service is available upon request . To inquire about replacing your Solo II Battery send us an email to: [email protected].
Safety Disclaimer
The Solo II Battery is not user replaceable. Arizer Batteries should not be substituted with third-party batteries — Only official Solo II Batteries should be used with the Arizer Solo II. We cannot verify the quality or safety of other batteries, and using third-party batteries can result in personal injury, electric shock, and damage to the device which is not covered under warranty.
If you experience an issue with your Solo II send an email to [email protected] and an expert Arizer customer service representative will reply as soon as possible to troubleshoot and determine the best way to resolve any issues. To help expedite your service request please include a description of the problem, your full name, your shipping address, the serial number on the bottom of your device, and a copy of your sales receipt.
Arizer Air Support
- 1 x Air Portable Micro-Heater
- 1 x Air Battery
- 1 x Air Charger / Power Adapter
- 1 x Air Tipped Glass Aroma Tube (70mm)
- 1 x Air Glass Aroma Tube (70mm)
- 1 x Air Glass Aroma Dish
- 1 x Air Belt-Clip Carry Case
- 1 x Air Clear Protective Silicone Skin
- 2 x Air Silicone Stem Caps
- 1 x Stainless Steel Stirring Tool
- 1 x Sample Aromatic Botanicals
- 1 x Air Owner’s Manual
Arizer Batteries meet rigorous quality standards. With normal use they will last for hundreds of charge cycles before losing any capacity. Dropping the battery or the unit can result in battery damage that may limit / reduce the battery capacity quickly, so it is important to handle the batteries and your unit carefully.
Battery Charge
Depending on the temperature setting and general usage patterns the Air battery will typically last for 3-5 uses per charge, or up to one hour of continuous use per charge. The battery will take 3-4 hours to fully charge, or longer if you use it while charging.
Use While Charging
If your battery is running low, with the Arizer Air you don’t have to wait for the battery to fully charge before you can use it. Just partially charge the battery (15-20 minutes) and then you can set the temperature and use the Air while the battery continues charging. Note: The Arizer Air will not operate if the battery is completely drained.
Interchangeable / Swappable Battery
An easily interchangeable battery allows you to have some spare batteries fully charged as a back-up for when your battery is running low and for extended use on the go.
Battery Conservation
The Arizer Air and Air Chargers have built-in protections to prevent the battery from being overcharged or drained too low. To conserve battery life, use the Arizer Air in a temperature controlled environment and use the lower temperature settings. When outdoors, stay sheltered from the elements and avoid using in extremely cold temperatures. Charge the battery as necessary. Do not store the battery fully charged or fully drained for longer than one month (store with partial charge).
Safety Disclaimer
Arizer Batteries should not be substituted for third-party batteries — Only use official Air Batteries with your Arizer Air. We cannot verify the quality or safety of other batteries, and using third-party batteries can result in personal injury, electric shock, and damage to the device which is not covered under warranty.
The Arizer Air’s optimized heating system warms up fast and has five preset temperatures:
- Level 1 (Blue) – 180°C / 356°F
- Level 2 (White) – 190°C / 374°F
- Level 3 (Green) – 200°C / 392°F
- Level 4 (Orange) – 205°C / 401°F
- Level 5 (Red) – 210°C / 410°F
The Audio / Beep function can be turned on and off. To turn the Audio / Beep on or off, first power on the device, then press and hold the Up Arrow button for approximately three seconds.
If the Audio / Beep is activated, a beep will be heard when the Arizer Air is powered on or off. If the Audio / Beep is deactivated, the Arizer Air remains silent when powered on or off.
A full range of parts and accessories to equip and protect your Arizer Air are available for purchase here.
If you can’t find the part you need send us an email to: [email protected] with a description of the part you need.
Note: Metal screens are available for your convenience but they make vapor harsh and diminish the flavors. The Air Glass Aroma Tubes have a built-in glass screen to keep vapor pure and flavorful so we recommend using whole or coarsely ground botanicals with no metal screen for smooth and tasty vapor.
The Air is ultra-compact, lightweight, and completely portable, conveniently fitting in the palm of your hand, pocket, or purse.
- Weight:116 grams
- Height:122 mm
- Diameter:29 mm
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
The Arizer Air carries a lifetime warranty on the heating element, and a limited 2-Year warranty covering defects in materials or workmanship, excluding battery. Glass is not covered under warranty. Retain proof of purchase for warranty service. Returning the product and costs incurred are the responsibility of the user. Arizer will repair or replace warrantied items at our discretion. The warranty does not cover units damaged by dropping, tampering, unauthorized service performed or attempted, modifying the unit, misuse or abuse.
Cautions, Disclaimers and Warnings (Read Before Use)
First Time Use – Examine box contents to ensure all included parts are in good condition, not damaged from shipping. Check glass parts for cracks or breakage. Packaging materials, bags, & small parts may pose a choking hazard. Keep out of reach/use from children, minors, and pets. If you are finding it difficult to insert a Glass Aroma Tube, turn on the device, set the maximum temperature, let the unit heat for 1-2 minutes, then try again. To burn off any residues from packaging, turn on the unit, set the temperature to 220° C, and let the unit heat for 5 – 10 minutes.
Warning – Hot Parts – Handle hot parts and glass parts with care. Do not place hot parts on non-heat safe surfaces. Carefully attach protective heat-rated silicone caps to safely cover hot end of glass parts. Allow heating unit and hot parts to cool before placing in purse, pocket, or any container where damage from hot parts can occur.
Parts are made from strong scientific quality borosilicate glass, but all borosilicate glass is breakable so handle with care and caution. Avoid tapping on hard surfaces to prevent cracking and breaking. If glass is dropped or sustains an impact, examine for cracking, chipping and weakness before use. Do not expose hot glass parts to cold water or extreme temperature change as this may result in cracking/breaking.
Product contains electrical and delicate parts — do not drop. If damaged do not operate. To protect/prevent against electric shock/fire never immerse or operate the product in or around any water/liquids. Do not stick or pour anything in the unit or place near flammable material. Do not store/operate/expose the unit and contents to extreme temperatures. Do not open the unit – doing so may cause electric shock and voids warranty.
Do not leave the unit turned on and left unattended.
The information contained in this manual is an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficacy or use of its preparation. This information is not intended in any way to replace or supersede professional consultations.
The information contained herein is for instructional and cautionary purposes only. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition, or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device, use unit only for its intended use.
Safety Certifications
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
Limitation of Liability (Read before use)
Failure to read or follow instructions, improper or careless use may lead to personal injury. Arizer and affiliated companies will not assume any liability for injury or damage resulting from the use or misuse of this device. Due to the fragility and nature of glass Arizer and affiliated companies are not responsible for cuts or injuries sustained from breakage. Arizer and affiliated companies are not liable for injuries or burns associated from touching hot parts. Arizer and affiliated companies are not liable for failures to comply with these warnings and safety guidelines. By purchasing this product, the buyer assumes all risks associated with lithium batteries. If you do not agree with these conditions return the product immediately before use.
This product is intended for use with the botanicals described herein — Arizer and affiliated companies are not liable for use with other than those botanicals described herein. Company’s liabilities for damages in connection with the product and its parts shall not exceed the purchase price of the product.
IMPORTANT – Obey local laws. Not all essential oils, botanicals and herbs are legal for use in every Country or State. Check your Local, State, Federal and Importation laws before ordering botanicals. This device is meant for legal use only.
Battery Safety & Warnings (Read before use)
Lithium batteries are volatile. Failure to read and follow these instructions may result in fire, personal injury and damage to property if charged or used improperly.
– Always handle your batteries with care – never drop them.
– Fully charge your Arizer Air Batteries before first use.
– Only use official Arizer Air Batteries & Chargers. Do not use any third-party, counterfeit, or unknown brand batteries or chargers.
– Lithium batteries can explode or cause a fire if they are used incorrectly or if they are defective. Do not tamper with or misuse the Arizer Air Batteries and do not use damaged/defective batteries.
– Arizer Air Batteries are manufactured to strict quality standards, specifically for use with the Arizer Air.
– Always match positive (+) and negative (-) when inserting batteries into the Arizer Air and the Air Battery Chargers.
– Batteries that are not in use should be stored in a safe, cool, dry place, individually in a plastic holder or container / away from all metal objects.
– Do not store your batteries fully charged or fully drained for extended periods of time (one month or longer).
Never throw the Arizer Air Batteries away and never put them into a battery collection box. If you have dropped the battery or notice physical damage you should take the following steps:
- Store the battery in a safe, dry place and leave it for at least one hour in case there is a short circuit, and the battery starts heating up.
- Check to see if the battery has become hot. If so, leave the battery until it has cooled off.
- For further protection, wrap the battery in a piece of kitchen paper and seal it with tape.
- Put the battery into a box and label it: “Lithium – Ion battery” and hand it in to a chemical waste disposal facility.
Counterfeit & Inferior – Quality Battery Warning:
-Customers are urged to be careful when purchasing batteries due to the flood of counterfeit and inferior-quality batteries for sale often found on online-auction and various websites.
-The use of counterfeit and/or inferior-quality lithium batteries can cause internal shorts leading to fires and/or explosions which can result in property damage and/or personal injury.
– The use of counterfeit and/or inferior-quality batteries could greatly reduce runtime and output performance, damage your Arizer Air, constitute a safety hazard, and voids all warranties.
If you experience an issue with your Arizer Air send an email to [email protected] and an expert Arizer customer service representative will reply as soon as possible to troubleshoot and determine the best way to resolve any issues. To help expedite your service request please include a description of the problem, your full name, your shipping address, the serial number on the bottom of your device, and a copy of your sales receipt.
Arizer Solo Support
- 1 x Solo Portable Micro-Heater
- 1 x Solo Charger
- 1 x Solo Glass Aroma Tube (Curved)
- 1 x Solo Glass Aroma Tube (110mm)
- 1 x Solo Glass Aroma Dish
- 2 x Solo Silicone Stem Caps
- 1 x Stainless Steel Stirring Tool
- 1 x Sample Aromatic Botanicals
- 1 x Solo Owner’s Manual
Arizer Batteries meet rigorous quality standards. With normal use they will last for hundreds of charge cycles before losing any capacity. Dropping the unit can result in battery damage that may limit / reduce the battery capacity quickly, so it is important to handle the unit carefully.
Battery Charge
Depending on the temperature setting and general usage patterns the Solo battery will typically last for 5-10 uses per charge, or approximately 1-2 hours of continuous use per charge.
The battery will take 3-4 hours to fully charge, or longer if you use it while charging.
Use While Charging
If your battery is running low, with the Arizer Solo you don’t have to wait for the battery to charge before you can use it. Just plug it in, set the temperature, and use the Solo while the battery continues charging.
Battery Conservation
The Arizer Solo and Solo Chargers have built-in protections to prevent the battery from being overcharged or drained too low. To conserve battery life, use the Arizer Solo in a temperature controlled environment and use the lower temperature settings. When outdoors, stay sheltered from the elements and avoid using in extremely cold temperatures. Charge the battery as necessary. Do not store the battery fully charged or fully drained for longer than one month (store with partial charge).
Battery Replacement
The Solo Battery is a high-capacity, long life battery, and will last for a long time, even with prolonged / regular use. The Solo Battery is covered under a limited 1-Year warranty and is also available for purchase upon request. To inquire about replacing your Solo Battery send us an email to: [email protected].
Safety Disclaimer
Arizer Batteries should not be substituted for third-party batteries — Only use official Solo Batteries with your Arizer Solo. We cannot verify the quality or safety of other batteries, and using third-party batteries can result in personal injury, electric shock, and damage to the device which is not covered under warranty.
The Arizer Solo’s optimized heating system warms up fast and has seven preset temperatures:
- Level 1 – 50°C / 122°F
- Level 2 – 185°C / 365°F
- Level 3 – 190°C / 374°F
- Level 4 – 195°C / 383°F
- Level 5 – 200°C / 393°F
- Level 6 – 205°C / 401°F
- Level 7 – 210°C / 410°F
The Audio / Beep function can be turned on and off. To turn the Audio / Beep on or off, first power on the device, then press and hold the Up Arrow button for approximately three seconds.
If the Audio / Beep is activated, a beep will be heard when the Arizer Solo is powered on or off. If the Audio / Beep is deactivated, the Arizer Solo remains silent when powered on or off.
A full range of parts and accessories to equip and protect your Arizer Solo are available for purchase here.
If you can’t find the part you need send us an email: [email protected] with a description of the part you need.
Note: Metal screens are available for your convenience but they make vapor harsh and diminish the flavors. The Solo Glass Aroma Tubes have a built-in glass screen to keep vapor pure and flavorful so we recommend using whole or coarsely ground botanicals with no metal screen for smooth and tasty vapor.
The Solo is compact, lightweight, and completely portable, conveniently fitting in the palm of your hand, coat pocket, backpack, or purse.
- Weight:217 grams
- Height:113 mm
- Diameter:46 mm
Equipped for worldwide use with an input capacity of 110-240V with international safety certifications.
The Arizer Solo carries a lifetime warranty on the heating element, a limited 2-Year warranty covering defects in materials or workmanship, and a limited 1-Year warranty covering the battery. Glass is not covered under warranty. Retain proof of purchase for warranty service. Returning the product and costs incurred are the responsibility of the user. Arizer will repair or replace warrantied items at our discretion. The warranty does not cover units damaged by dropping, tampering, unauthorized service performed or attempted, modifying the unit, misuse or abuse.
Cautions, Disclaimers and Warnings (Read Before Use)
First Time Use – Examine box contents to ensure all included parts are in good condition, not damaged from shipping. Check glass parts for cracks or breakage. Packaging materials, bags, & small parts may pose a choking hazard. Keep out of reach/use from children, minors, and pets. If you are finding it difficult to insert a Glass Aroma Tube, turn on the device, set the maximum temperature, let the unit heat for 1-2 minutes, then try again. To burn off any residues from packaging, turn on the unit, set the temperature to 220° C, and let the unit heat for 5 – 10 minutes.
Warning – Hot Parts – Handle hot parts and glass parts with care. Do not place hot parts on non-heat safe surfaces. Carefully attach protective heat-rated silicone caps to safely cover hot end of glass parts. Allow heating unit and hot parts to cool before placing in purse, pocket, or any container where damage from hot parts can occur.
Parts are made from strong scientific quality borosilicate glass, but all borosilicate glass is breakable so handle with care and caution. Avoid tapping on hard surfaces to prevent cracking and breaking. If glass is dropped or sustains an impact, examine for cracking, chipping and weakness before use. Do not expose hot glass parts to cold water or extreme temperature change as this may result in cracking/breaking.
Product contains electrical and delicate parts — do not drop. If damaged do not operate. To protect/prevent against electric shock/fire never immerse or operate the product in or around any water/liquids. Do not stick or pour anything in the unit or place near flammable material. Do not store/operate/expose the unit and contents to extreme temperatures. Do not open the unit – doing so may cause electric shock and voids warranty.
Do not leave the unit turned on and left unattended.
The information contained in this manual is an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficacy or use of its preparation. This information is not intended in any way to replace or supersede professional consultations.
The information contained herein is for instructional and cautionary purposes only. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition, or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device, use unit only for its intended use.
Safety Certifications
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
Limitation of Liability (Read before use)
Failure to read or follow instructions, improper or careless use may lead to personal injury. Arizer and affiliated companies will not assume any liability for injury or damage resulting from the use or misuse of this device. Due to the fragility and nature of glass Arizer and affiliated companies are not responsible for cuts or injuries sustained from breakage. Arizer and affiliated companies are not liable for injuries or burns associated from touching hot parts. Arizer and affiliated companies are not liable for failures to comply with these warnings and safety guidelines. By purchasing this product, the buyer assumes all risks associated with lithium batteries. If you do not agree with these conditions return the product immediately before use.
This product is intended for use with the botanicals described herein — Arizer and affiliated companies are not liable for use with other than those botanicals described herein. Company’s liabilities for damages in connection with the product and its parts shall not exceed the purchase price of the product.
IMPORTANT – Obey local laws. Not all essential oils, botanicals and herbs are legal for use in every Country or State. Check your Local, State, Federal and Importation laws before ordering botanicals. This device is meant for legal use only.
If you experience an issue with your Arizer Solo send an email to [email protected] and an expert Arizer customer service representative will reply as soon as possible to troubleshoot and determine the best way to resolve any issues. To help expedite your service request please include a description of the problem, your full name, your shipping address, the serial number on the bottom of your device, and a copy of your sales receipt.
Arizer Extreme Q Support
- 1 x Extreme Q Multi-Purpose Heater
- 1 x Extreme Q Power Adapter
- 1 x Extreme Q Remote Control
- 1 x Extreme Q Glass Cyclone Bowl
- 1 x Extreme Q Glass Aromatherapy Dish
- 1 x Interchangeable Extreme Q Glass Whip Mouthpiece
- 1 x Glass Stirring Tool
- 1 x Extreme Q 3′ Whip (Silicone)
- 1 x Extreme Q All-Glass Mini Whip
- 1 x Extreme Q Balloon with Frosted Glass Mouthpiece
- 1 x Extreme Q Spare Flat Screen
- 1 x Extreme Spare Q Dome Screen
- 1 x Extreme Q Owner’s Manual
The Control Panel consists of the LCD and four buttons – the Power button, the Menu button, and the Up & Down Arrow button. Use the Menu button to select the different settings and the Arrow buttons to adjust them.
The Extreme Q display can be set to Celsius or Fahrenheit, and has a wide temperature range of 50° C – 260° C (122° F – 500° F). The temperature is adjustable in 1-degree Celsius increments with the Control Panel buttons on the unit and with the Remote Control.
To adjust the temperature, on the control panel press the Up or Down Arrow buttons, or on the remote control press one of the preset temperature buttons or use the plus (+) or minus (-) buttons.
Note: The outside of the device does not get hot — it is high grade, dual-wall, stainless steel that stays cool to the touch. The glass parts will get hot, so they should be left to cool before handling and must be handled carefully.
The quiet and powerful three-speed fan can be operated with the Control Panel buttons on the unit and with the Remote Control.
If it is taking longer than 2-3 minutes to fill the bag / balloon it might be time for you to clean or replace some parts such as the Dome Screen and the Balloon. If you check these things and a problem persists, please refer to the Troubleshooting section below.
A full range of parts and accessories to equip your Extreme Q are available for purchase here.
If you can’t find the part you need send us an email to: [email protected] with a description of the part you need.
Note: In case of accidental damage the internal glass part (the Glass Heater Cover) comes with step-by-step repair instructions and is available for purchase on the V-Tower Accessories page.
Small, sturdy, and lightweight. Sized to fit conveniently on any counter, desk, or table.
- Weight (no parts):442 grams
- Height (no parts):170 mm
- Base Diameter:165 mm
Equipped for worldwide use with an input capacity of 110-240V with international safety certifications.
The Extreme Q carries a lifetime warranty on the heating element and a limited 3-Year warranty covering defects in materials or workmanship. Glass is not covered under warranty. Retain proof of purchase for warranty service. Returning the product and costs incurred are the responsibility of the user. Arizer will repair or replace warrantied items at our discretion. The warranty does not cover units damaged by dropping, tampering, unauthorized service performed or attempted, modifying the unit, misuse or abuse.
Cautions, Disclaimers and Warnings (Read Before Use)
First Time Use – Examine box contents to ensure all included parts are in good condition, not damaged from shipping. Check glass parts for cracks or breakage. Packaging materials, bags, & small parts may pose a choking hazard. Keep out of reach/use from children, minors, and pets. To burn off any residues from packaging, turn on the unit, set the temperature to 220° C, and let the unit heat for 5 – 10 minutes.
Warning – Hot Parts – Handle hot parts and glass parts with care. Allow heating unit and hot parts to cool before handling, storing, or placing on any surface where damage from hot parts can occur.
Parts are made from strong scientific quality borosilicate glass, but all borosilicate glass is breakable so handle with care and caution. Avoid tapping on hard surfaces to prevent cracking and breaking. If glass is dropped or sustains an impact, examine for cracking, chipping and weakness before use. Do not expose hot glass parts to cold water or extreme temperature change as this may result in cracking/breaking.
Product contains electrical and delicate parts — do not drop. If damaged do not operate. To protect/prevent against electric shock/fire never immerse or operate the product in or around any water/liquids. Do not stick or pour anything in the unit or place near flammable material. Do not store/operate/expose the unit and contents to extreme temperatures. Do not open the unit – doing so may cause electric shock and unauthorized service may void the warranty.
Do not yank or twist the cord to unplug. To disconnect, turn the unit off and remove/unplug the cord by gripping the plug body and pulling it from the outlet.
Do not let the cord hang over the edge of tables/counters or touch hot surfaces. The unit should be situated safely so the cord cannot be pulled on or tripped over. If an extension cord is needed make sure to use a grounded three prong power cord (grounding-type 3-wire cord).
Do not leave the unit turned on and left unattended.
The information contained in this manual is an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficiency or use of its preparation. This information is not intended in any way to replace or supersede professional consultations.
The information contained herein is for instructional and cautionary purposes only. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition, or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device, use unit only for its intended use.
Safety Certifications
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
Limitation of Liability (Read before use)
Failure to read or follow instructions, improper or careless use may lead to personal injury. Arizer and affiliated companies will not assume any liability for injury or damage resulting from the use or misuse of this device. Due to the fragility and nature of glass Arizer and affiliated companies are not responsible for cuts or injuries sustained from breakage. Arizer and affiliated companies are not liable for injuries or burns associated from touching hot parts. Arizer and affiliated companies are not liable for failures to comply with these warnings and safety guidelines. If you do not agree with these conditions return the product immediately before use.
This product is intended for use with the botanicals described herein — Arizer and affiliated companies are not liable for use with other than those botanicals described herein. Company’s liabilities for damages in connection with the product and its parts shall not exceed the purchase price of the product.
IMPORTANT – Obey local laws. Not all essential oils, botanicals and herbs are legal for use in every Country or State. Check your Local, State, Federal and Importation laws before ordering botanicals. This device is meant for legal use only.
If you experience an issue with your Extreme Q send an email to [email protected] and an expert Arizer customer service representative will reply as soon as possible to troubleshoot and determine the best way to resolve any issues. To help expedite your service request please include a description of the problem, your full name, your shipping address, the serial number on the bottom of your device, and a copy of your sales receipt.
628078800034
Solo III Support
- 1 x Solo III Multi-Purpose Portable Heater
- 1 x Solo III Owner’s Manual
- 1 x USB-C Charger (5v, 3A)
- 1 x XL Glass Aroma Tube (90mm)
- 1 x XL Frosted Glass Aroma Tube (14mm)
- 1 x Air / Solo Glass Aroma Tube (90mm)
- 1 x Air / Solo Frosted Glass Aroma Tube (14mm)
- 4 x Air / Solo Silicone Stem Caps
- 2 x PVC Travel Tube w./ Cap (90mm Size)
- 2 x PVC Travel Tube w./ Cap (70mm Size)
- 1 x Stainless Steel Stirring Tool
- 4 x Air / Solo Stainless Steel Filter Screens
Lithium batteries can explode or cause a fire if they are used incorrectly, if they are damaged, defective, or tampered with. Do not tamper with or misuse the Arizer Solo III Battery, and do not use damaged/defective batteries or Solo III devices.
Battery Storage – Arizer Solo III should be stored in a safe, temperature controlled, cool, dry place. Do not store in extreme temperature environments. Extreme heat or cold can damage the device and/or battery. Do not store your Solo III with a fully charged or fully drained battery for extended periods of time (one month or longer). If storing for long periods, store with the battery at 50% capacity. Never throw away the Solo III or Solo III Batteries, and never put Solo III Batteries in a battery collection box. If you have dropped the device or notice physical damage you should take the following steps: Place the device in a safe, dry place and leave it for at least one hour in case there is a short circuit and the battery starts heating up. Check to see if the device has become hot. If so, leave the device until it has cooled off, and then dispose according to local laws and regulations.
Battery Performance – Arizer Batteries meet rigorous quality standards. With normal use they will last for hundreds of charge cycles before losing any capacity. Dropping the battery or the unit can result in battery damage that may limit / reduce the battery capacity quickly, so it is important to handle your unit carefully.
Battery Charge – Depending on the temperature setting and general usage patterns, the Solo III battery will typically last for 3 hours of use per charge. The battery will take 3 hours to fully charge, or longer if you use it while charging. Use While Charging – If your battery is running low with the Solo III, you don’t have to wait for the battery to fully charge before you can use it. Just partially charge the battery (5-10 minutes) and then you can set the temperature and use the Solo III while the battery continues charging. Note: The Solo III will not operate if the battery is completely drained.
Battery Conservation – Charge the battery as necessary. The Solo III and Solo III Chargers have built-in protections to prevent the battery from being overcharged or drained too low. To conserve battery life, use the Solo III in a temperature-controlled environment and use lower temperature settings. When outdoors, stay sheltered from the elements and avoid using in extremely cold temperatures.
Battery Replacement – The Solo III Battery is a high-capacity, long life battery, and will last for a long time, even with prolonged / regular use. The Solo III Battery is covered under a limited 1-Year warranty and replacement service is available upon request.
To inquire about replacing your Solo III Battery send us an email to: [email protected].
The Control Panel consists of a large vibrant Display Screen, and a Control Ring containing a center (M) button, and an outer ring with Up, Dowm, Left & Right Arrows.
Powering ON/Lock Screen
PRESS AND HOLD the center M button for 3 seconds. Once the lock appears , press LEFT then UP then RIGHT in sequence to unlock your Solo III. A password hint can be found etched on the bottom of your Solo III.
Powering OFF
To power Off, press the M button until you see the Bye screen.
Control Buttons
M Button
PRESS – Select (Settings/ Mode Select/ Presets)
DOUBLE PRESS – Preset Selection
HOLD – Power ON/OFF
UP Button
PRESS – Increase Temp. by 1°(Session Mode), Heat(On Demand Mode), Up(Settings/ Mode Select/ Presets)
HOLD – Increase Temp. by 10°(Session Mode)
DOWN Button
PRESS – Decrease Temp. by 1°(Session Mode), Cancel Heat(On Demand Mode), Down(Settings/Mode Select/Presets)
HOLD – Decrease Temp. by 10°(Session Mode)
RIGHT Button
PRESS – Right (Settings/ Presets)
DOUBLE PRESS – Next (Preset/Heat Level)
HOLD – Settings
LEFT Button
PRESS – Left (Settings/ Presets)
DOUBLE PRESS – Previous (Preset/Heat Level)
HOLD – Mode Select
Mode Selection
Press UP or DOWN and press the M button to select either Session Mode or On Demand Mode. You can easily switch modes at any time by holding the LEFT button.
In Session Mode your Solo III will begin heating automatically. While in On Demand Mode press UP to begin heating.
Sit back, relax, and enjoy a velvety, smooth and tasty vapor session.
To adjust the temperature PRESS for 1° increments or HOLD for 10° increments: UP to increase temperature or DOWN to decrease temperature.
Session Mode – Presets
Double pressing the M button will take you to the preset selection screen. Use the LEFT and RIGHT buttons to navigate your presets and press the M button to make a selection. Your Solo III will then heat or cool to the selected preset temperature. Your presets can be adjusted by selecting the EDIT button found below the preset you would like to adjust. To conveniently switch between presets, quickly double press LEFT or RIGHT.
Take quick direct hits or massive rips through your favorite bubbler.
In On Demand Mode, press UP to begin heating to the current preset heat level. When all bars are yellow your device is heated and ready to draw. As the bars turn from yellow to white this represents your draw time. Default draw time is 15 seconds which can be easily changed in the settings. To cancel heating, press DOWN.
On Demand Mode – Heat levels
Double Pressing the M button will take you to the Heat Level selection screen. Use the LEFT and RIGHT buttons to navigate through your Heat Levels and press the M button to make a selection. Double press LEFT or RIGHT to switch your Heat Level.
HOLD the RIGHT button to access the settings. The settings are saved independently for each Mode. Use the LEFT and RIGHT buttons to navigate to your desired setting category and use the M button to select the setting you would like to change. Once a category has been selected, use the UP and Down buttons to change the setting and PRESS the M button to confirm your change. Use the <BACK button to exit the settings.
UNITS
The Solo III display can be set to Celsius or Fahrenheit. (Session Mode only)
DRAW TIME
The oven will maintain temperature for the duration of the set Draw Time.Personalize your Draw Time between 5 – 25 seconds at 5 second increments. (On Demand Mode only)
NOTIFICATIONS
ALL – The device beeps once for every button press, and beeps twice when Set Temperature (Session Mode) or Heat Level (On Demand Mode) is reached.
TEMPERATURE – The device beeps twice when Set Temperature (Session Mode) or Heat Level (On Demand Mode) is reached.
OFF – Silence. No beeps.
VOLUME
Adjust the volume of the NOTIFICATION beeps between LOW, MEDIUM and HIGH.
BRIGHTNESS
Adjust the display brightness between LOW, MEDIUM, and HIGH.
INVERSION
Turn On or Off the Control & Display Inversion feature.
AUTO-OFF
The automatic shut-off timer safety feature ensures you don’t forget to turn off the unit and helps conserve battery life. Adjust the shut-off timer between 5–20 minutes in 1 minute increments.
Put some coarsely ground botanicals in a small container then gently push and slightly twist the glass stem into the container to fill the dish. Do not press too hard or pack too tightly. Loading the Glass Aroma Tube this way takes advantage of its design ensuring easy maintenance and optimal performance. Alternatively, you can load the chamber with pre-ground botanicals or small buds with your fingers. For optimal convection heating and pure vapor, lightly tamp down the botanicals leaving a slight gap (1-2 mm).
Connect to your water pipe or bubbler using the included Frosted Glass Aroma Tube. When the Solo III is turned upside down with the Inversion setting turned ON, the display and controls automatically invert for convenient operation
A full range of parts and accessories to equip and protect your Solo III are available for purchase here. If you can’t find the part you need send an email to: [email protected] with a description of the part you need.
The Solo III is compact, lightweight, and completely portable, conveniently fitting in the palm of your hand, pocket, or purse.
Weight: 280 grams
Length: 49 mm
Width: 32 mm
Height: 130 mm
Equipped for worldwide use with an input capacity of 110-240V and international safety certifications.
The Solo III carries a lifetime warranty on the heating element, a limited 2-Year warranty covering defects in materials or workmanship, and a limited 1-Year warranty covering the battery. Glass is not covered under warranty. Retain proof of purchase for warranty service. Returning the product and costs incurred are the responsibility of the user. Arizer will repair or replace warrantied items at our discretion. The warranty does not cover units damaged by dropping, tampering, unauthorized service performed or attempted, modifying the unit, misuse or abuse. Troubleshooting If you experience an issue with your Solo III send an email to [email protected] and an expert Arizer customer service representative will reply as soon as possible to troubleshoot and determine the best way to resolve any issues. To help expedite your service request please include a description of the problem, your full name, your shipping address, the serial number on the bottom of your device, and a copy of your sales receipt.
Cautions, Disclaimers & Warnings(Read before use)
First Time Use – Examine box contents to ensure all included parts are in good condition, not damaged from shipping. Check glass parts for cracks or breakage. Packaging materials, bags, & small parts may pose a choking hazard. Keep out of reach/use from children, minors and pets. Glass Aroma Tubes may fit tightly in the unit at first. If you are finding it difficult to insert a Glass Aroma Tube, turn on the Solo III, set the temperature to 200° C, and let the unit heat for 1-2 minutes then try again. To burn off any residues from packaging, turn on the unit, set the temperature to 220° C, and let the unit heat for 5 – 10 minutes. Warning – Hot Parts – Handle hot parts and glass parts with care. Do not place hot parts on non-heat safe surfaces. Carefully attach protective heat-rated silicone caps to safely cover the hot end of glass parts. Allow the heating unit and hot parts to cool before placing them in the purse, pocket, or any container where damage from hot parts can occur. Parts are made from strong scientific quality borosilicate glass, but all borosilicate glass is breakable so handle with care and caution. Avoid tapping on hard surfaces to prevent cracking and breaking. If glass is dropped or sustains an impact, examine for cracking, chipping and weakness before use. Do not expose hot glass parts to cold water or extreme temperature change as this may result in cracking/breaking. Product contains electrical and delicate parts — do not drop. If damaged do not operate. To protect/prevent against electric shock/fire, never immerse or operate the product in or around any water/liquids. Do not stick or pour anything in the unit or place near flammable material. Do not store/operate/expose the unit and contents to extreme temperatures. Do not open the unit – doing so may cause electric shock and voids warranty. Do not leave the unit turned on and left unattended. The information contained in this manual is an aid in understanding the various theories and practices, preparation and uses, and does not represent an endorsement or guarantee the efficacy or use of its preparation. This information is not intended in any way to replace or supersede professional consultations. The information contained herein is for instructional and cautionary purposes only. In no way is the information contained herein intended to be a medical or prescriptive guide or to be used for diagnosing or treating a health problem, condition or disease. It is the user’s responsibility to consult a Physician or Medical Professional. This product is not licensed as a medical device, use unit only for its intended use.
Limitation of Liability (Read before use)
Failure to read or follow instructions, improper or careless use may lead to personal injury. Arizer and affiliated companies will not assume any liability for injury or damage resulting from the use or misuse of this device. Due to the fragility and nature of glass Arizer and affiliated companies are not responsible for cuts or injuries sustained from breakage. Arizer and affiliated companies are not liable for injuries or burns associated from touching hot parts. Arizer and affiliated companies are not liable for failures to comply with these warnings and safety guidelines. By purchasing this product the buyer assumes all risks associated with lithium batteries. If you do not agree with these conditions, return the product immediately before use. This product is intended for use with the botanicals described herein — Arizer and affiliated companies are not liable for use with other than those botanicals described herein. Company’s liabilities for damages in connection with the product and its parts shall not exceed the purchase price of the product. IMPORTANT Obey local laws. Not all essential oils, botanicals and herbs are legal for use in every Country or State. Check your Local, State, Federal and Importation laws before ordering botanicals.This device is meant for legal use only.
To get help with your Solo III, email [email protected]. Include a description of the issue, your full name, shipping address, device’s serial number, and sales receipt. Arizer’s customer service will respond promptly. Designed in Canada. Made in China. ©2024 Arizer. All rights reserved. Arizer, the Arizer logos, and Solo III are trademarks or registered trademarks of Arizer in Canada, USA, Europe, Asia and other jurisdictions
The Solo III itself is essentially maintenance free so you can spend your time using it instead of cleaning it! Simply recharge the battery when it is low, swap out pre-loaded Glass Aroma Tubes on the go without fiddling with emptying or cleaning bowls, and periodically clean your Glass Aroma Tubes for optimal flavor and performance. To clean the glass parts, soak them in isopropyl (rubbing) alcohol for a couple hours then rinse with hot water. In most cases doing this will clean the Glass Aroma Tubes as good as new. Repeat as necessary. After cleaning, always ensure the Glass Aroma Tubes are fully dry before use.
Contact Arizer Support
Fill out the form below or email us and we will be happy to assist you!
Contact Us - Support
Service
Wholesale
Interested in becoming a Retailer or Distributor?
Click Here
